Investigations on the limitations of rapid experimental determination of stability boundaries during milling

Christian Brecher; Prateek Chavan; Alexander Epple

doi:10.1051/meca/2017037

All issues

Volume 18 / No 6 (2017)

Mechanics & Industry, 18 6 (2017) 608

References

Open Access

Issue		Mechanics & Industry Volume 18, Number 6, 2017


Article Number		608
Number of page(s)		6
DOI		https://doi.org/10.1051/meca/2017037
Published online		06 March 2018

A. Comak, E. Budak, Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability, Precis. Eng. 47 (2017) 459–468 [CrossRef] [Google Scholar]
Y. Altintas, E. Budak, Analytical prediction of stability lobes in milling, Ann. CIRP 44 (1995) 357–362 [Google Scholar]
R. Sridhar, R.E. Hohn, G.W. Long, A stability algorithm for the general milling process, Trans. ASME J. Eng. Ind. 90 (1968) 330–334 [Google Scholar]
S. Smith, J. Tlusty, Update on high speed milling dynamics, Trans. ASME J. Eng. Ind. 112 (1990) 142–149 [CrossRef] [Google Scholar]
G. Quintana, J. Ciurana, D. Teixidor, A new experimental methodology for identification of stability lobes diagram in milling operations, Mach. Tools Manuf. 48 (2008) 1637–1645 [CrossRef] [Google Scholar]
W.L. Weingaertner, R.B. Schroeter, M.L. Polli, J. de Oliveira Gomes, Evaluation of high-speed end-milling dynamic stability through audio signal measurements, Mater. Process. Technol. 179 (2006) 133–138 [CrossRef] [Google Scholar]
F. Ismail, E. Soliman, A new method for the identification of stability lobes in machining, Mach. Tools Manuf. 37 (1997) 763–774 [CrossRef] [Google Scholar]
N. Grossi, A. Scippa, L. Sallese, R. Sato, G. Campatelli, Spindle speed ramp-up test: a novel experimental approach for chatter stability detection, Mach. Tools Manuf. 89 (2015) 221–230 [CrossRef] [Google Scholar]
C. Brecher, A. Epple, M. Fey, Optimale Prozessparameter effizient ermitteln, wt Werkstatttechnik online 104 (2014) 260–265 [Google Scholar]
T. Surmann, Geometrisch-physikalische Simulation der Prozessdynamik für das fünfachsige Fräsen von Freiformflächen, Thesis, Dortmund University, 2005 [Google Scholar]
C. Brecher, C. Kiesewetter, A. Epple, M. Fey, Automatisierte Erstellung von Stabilitätskarten für Fräsbearbeitungen, ZWF 110 (2015) 191–195 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] A. Comak, E. Budak, Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability, Precis. Eng. 47 (2017) 459–468 [CrossRef] [Google Scholar]

[2] Y. Altintas, E. Budak, Analytical prediction of stability lobes in milling, Ann. CIRP 44 (1995) 357–362 [Google Scholar]

[3] R. Sridhar, R.E. Hohn, G.W. Long, A stability algorithm for the general milling process, Trans. ASME J. Eng. Ind. 90 (1968) 330–334 [Google Scholar]

[4] S. Smith, J. Tlusty, Update on high speed milling dynamics, Trans. ASME J. Eng. Ind. 112 (1990) 142–149 [CrossRef] [Google Scholar]

[5] G. Quintana, J. Ciurana, D. Teixidor, A new experimental methodology for identification of stability lobes diagram in milling operations, Mach. Tools Manuf. 48 (2008) 1637–1645 [CrossRef] [Google Scholar]

[6] W.L. Weingaertner, R.B. Schroeter, M.L. Polli, J. de Oliveira Gomes, Evaluation of high-speed end-milling dynamic stability through audio signal measurements, Mater. Process. Technol. 179 (2006) 133–138 [CrossRef] [Google Scholar]

[7] F. Ismail, E. Soliman, A new method for the identification of stability lobes in machining, Mach. Tools Manuf. 37 (1997) 763–774 [CrossRef] [Google Scholar]

[8] N. Grossi, A. Scippa, L. Sallese, R. Sato, G. Campatelli, Spindle speed ramp-up test: a novel experimental approach for chatter stability detection, Mach. Tools Manuf. 89 (2015) 221–230 [CrossRef] [Google Scholar]

[9] C. Brecher, A. Epple, M. Fey, Optimale Prozessparameter effizient ermitteln, wt Werkstatttechnik online 104 (2014) 260–265 [Google Scholar]

[10] T. Surmann, Geometrisch-physikalische Simulation der Prozessdynamik für das fünfachsige Fräsen von Freiformflächen, Thesis, Dortmund University, 2005 [Google Scholar]

[11] C. Brecher, C. Kiesewetter, A. Epple, M. Fey, Automatisierte Erstellung von Stabilitätskarten für Fräsbearbeitungen, ZWF 110 (2015) 191–195 [CrossRef] [Google Scholar]