Open Access
| Issue |
Mechanics & Industry
Volume 19, Number 1, 2018
|
|
|---|---|---|
| Article Number | 107 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/meca/2017034 | |
| Published online | 31 August 2018 | |
- G. Béranger, G. Henry, G. Labbe, P Soulignac, Les aciers spéciaux, Lavoisier, Paris, 1997 [Google Scholar]
- M. Saby, T. Sourmail, Rapport d'avancement sur la connaissance de la trempe-revenu des nuances oil&gas, Ascometal CREAS, CREAS R 2014-15 2014 [Google Scholar]
- Y. Tomita, Low-Temperature improvement of mechanical properties of AISI 4340 steel through high-temperature thermomechanical treatment, Metall. Trans. A. 22 5 (1991) 1093–1102 [CrossRef] [Google Scholar]
- S. Takebayashi, K. Ushioda, N. Yoshinaga, S. Ogata, Effect of carbide size distribution on the impact toughness of tempered martensitic steels with two different prior austenite grain sizes evaluated by instrumented charpy test, Mater. Trans. 54 7 (2013) 1110–1119 [CrossRef] [Google Scholar]
- Y.-R. Im, Y. Jun Oh, B.-J. Lee, J. Hwa Hong, H.-C. Lee, Effects of carbide precipitation on the strength and charpy impact properties of low carbon Mn–Ni–Mo bainitic steels, J. Nucl. Mater. 297 2 (2001) 138–148 [CrossRef] [Google Scholar]
- A. Pineau, Development of the local approach to fracture over the past 25 years: theory and applications, Int. J. Fract. 138 1–4 (2006) 139–166 [CrossRef] [Google Scholar]
- L. Xue, T. Wierzbicki, Ductile fracture initiation and propagation modeling using damage plasticity theory, Eng. Fract. Mech. 75 11 (2008) 3276–3293 [CrossRef] [Google Scholar]
- T. Wierzbicki, Y. Bao, Y.-W. Lee, Y. Bai, Calibration and evaluation of seven fracture models, Int. J. Mech. Sci. 47 4–5 (2005) 719–743 [CrossRef] [Google Scholar]
- P.R. Sreenivasan, S.K. Ray, S.L. Mannan, P. Rodriguez, Dynamic fracture toughness and charpy impact properties of an AISI 403 martensitic stainless steel, J. Nucl. Mater. 228 3 (1996) 338–345 [CrossRef] [Google Scholar]
- P. Haušild, I. Nedbal, C. Berdin, C. Prioul, The influence of ductile tearing on fracture energy in the ductile-to-brittle transition temperature range, Mater. Sci. Eng. A, 335 1–2 (2002) 164–174 [CrossRef] [Google Scholar]
- A. Salemi, A. Abdollah-Zadeh, M. Mirzaei, H. Assadi, A study on fracture properties of multiphase microstructures of a CrMo steel, Mater. Sci. Eng. A 492 1–2 (2008) 45–48 [CrossRef] [Google Scholar]
- J. Lorthios, M. Mazière, X. Lemoine, P. Cugy, J. Besson, A.-F. Gourgues-Lorenzon, Fracture behaviour of a Fe–22Mn–0.6C–0.2V austenitic TWIP steel, Int. J. Mech. Sci. 101 (2015) 99–113 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.