EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 19 / No 3 (2018) Mechanics & Industry, 19 3 (2018) 309 References
Open Access
Issue
Mechanics & Industry
Volume 19, Number 3, 2018
Article Number 309
Number of page(s) 10
DOI https://doi.org/10.1051/meca/2017045
Published online 20 September 2018
  1. X. Zhu, Basic of packer design, China Petrochemical Press, Beijing, 2012, p. 4 (in Chinese) [Google Scholar]
  2. J. Liu Jubao, L. Dang, M. Fu, Q. Wang, Mechanics analysis of large deformation and double contact of packer rubber sleeve during axial compressing, China Pet. Mach. 42 (2014) 49–54 [Google Scholar]
  3. J.H. Yu, D.A. Dillard, D.R. Lefebvre, Pressure and shear stress distributions of an elastomer constrained by a cylinder of finite length, Int. J. Solids Struct. 38 (2011) 6839–6849 [CrossRef] [Google Scholar]
  4. W.G. Ma, B. Qu, F. Guan, Effect of the friction coefficient for contact pressure of packer rubber, J. Mech. Eng. Sci. 228 (2014) 2881–2887 [CrossRef] [Google Scholar]
  5. M.S. Constantinou, A. Kartoum, J.M. Kelly, Analysis of compression of hollow circular elastomeric bearings, Eng. Struct. 14 (1992) 103–111 [CrossRef] [Google Scholar]
  6. M. Akhtar, S.Z. Qamar, T. Pervez, R. Khan, M.S.M. Al-Kharusi, Elastomer seals in cold expansion of petroleum tubulars: comparison of material models, Mater. Manuf. Process. 27 (2012) 715–20 [CrossRef] [Google Scholar]
  7. S.A. Al-Hiddabi, T. Pervez, S.Z. Qamar, et al., Analytical model of elastomer seal performance in oil wells, Appl. Math. Model. 39 (2015) 2836–2848 [CrossRef] [Google Scholar]
  8. S.Z. Qamar, S.A. Al-Hiddabi, T. Pervez, Mechanical testing and characterization of a swelling elastomer, J. Elastomers. Plast. 14 (2009) 415–431 [CrossRef] [Google Scholar]
  9. J.M. Bielsa, M. Canales, F.J. Martinez, et al., Application of finite element simulations for data reduction of experimental friction tests on rubber metal contacts, Tribol. Int. 43 (2010) 785–795 [CrossRef] [Google Scholar]
  10. L.R.G. Treloar, The Physics of Rubber Elasticity, Oxford University Press, Oxford, 2005. [Google Scholar]
  11. S.Z. Qamar, T. Pervez, M. Akshtar, M.S.M. Al-Kharusi, Design and manufacture of swell packers: influence of material behavior, Mater. Manuf. Process. 27 (2012) 721–726 [CrossRef] [Google Scholar]
  12. M.A. Meyers, K.K. Chawla, Mechanical Behavior of Materials, 2nd edn. University Press, Cambridge, 2008 [CrossRef] [Google Scholar]
  13. A. Al-Yami, H. Nasr-El-Din, M. Al-Arfaj, et al., Investigation of water-swelling packers, in: SPE Gas Technol. Symp. 2 (2008) 468–478 [Google Scholar]
  14. H. Jafarzadeh, M. Zadshakoyan, E.A. Sobbouhi, Numerical studies of some important design factors in radial-forward extrusion process, Mater. Manuf. Process. 25 (2010) 857–863 [CrossRef] [Google Scholar]
  15. C. Calvert, M. Tirovic, T. Stolarski, Design and development of an elastomer-based pneumatic seal using finite element analysis, Proc. Inst. Mech. Eng. Part J 216 (2002) 127–138 [CrossRef] [Google Scholar]
  16. B.R. Thomas, Merging coiled tubing and swellable packer technologies, in: SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, Paper #SPE 143037-MS, The Woodlands, Texas, USA, 2011 [Google Scholar]
  17. R. Evers, D. Young, G. Vargus, et al., Design methodology for swellable elastomer packers in fracturing operations, in: SPE Annu. Tech.Conf. Exhib. 6 (2008) 3710–3721 [Google Scholar]
  18. W.F. Hosford, Mechanical Behavior of Materials, Cambridge University Press, Cambridge, UK, 2005 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.