Open Access
Issue
Mechanics & Industry
Volume 21, Number 6, 2020
Article Number 605
Number of page(s) 17
DOI https://doi.org/10.1051/meca/2020078
Published online 16 October 2020
  1. C. Bruni, F.F. Gabrielli, M. Simoncini, Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B, Int. J. Mach. Tools Manuf. 46 , 1547–1554 (2006) [Google Scholar]
  2. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, S. Roy, ANN Modeling of Cutting Performances in Spray Cooling Assisted Hard Turning, Mater. Today Proc., 18482–18488 (2018) [Google Scholar]
  3. P.J. Liew, A. Shaaroni, N.A.C. Sidik, J. Yan, An overview of current status of cutting fluids and cooling techniques of turning hard steel, Int. J. Heat. Mass Transf. 114 , 380–394 (2017) [Google Scholar]
  4. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, An investigation to study the wear characteristics and comparative performance of cutting inserts during hard turning, Int. J. Mach. Mach. Mater. 20–24 (2018). https://doi.org/10.1504/IJMMM.2018.094730 [Google Scholar]
  5. S. Chinchankar, S.K. Choudhury, Machining of hardened steel experimental investigations, performance modeling and cooling techniques: a review, Int. J. Mach. Tool Manufact. 89 , 95–109 (2015) [CrossRef] [Google Scholar]
  6. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, M. Ukamanal, Experimental investigation on hard turning using mixed ceramic insert under accelerated cooling environment, Int. J. Ind. Eng. Comput. 9 , 509–522 (2018) [Google Scholar]
  7. V.S. Sharma, G.R. Singh, K. Sorby, A Review on Minimum Quantity Lubrication for Machining Processes, Mater. Manuf. Process. 30 , 935–953 (2015) [CrossRef] [Google Scholar]
  8. R.K. Das, A.K. Sahoo, R. Kumar, S. Roy, P.C. Mishra, T. Mohanty, MQL assisted cleaner machining using PVD TiAlN coated carbide insert: comparative assessment, Indian J. Eng. Mater. Sci. 26 , 311–325 (2019) [Google Scholar]
  9. R.K. Das, A.K. Sahoo, R. Kumar, A. Panda, Performances of time-controlled pulse minimum quantity lubrication in machining of hard to cut material: a brief review, Mater. Today Proc. 23 , 545–548 (2020) [Google Scholar]
  10. M. Mia, M.H. Razi, I. Ahmad, R. Mostafa, S.M. Rahman, D.H. Ahmed, N.R. Dhar, Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network, Int. J. Adv. Manufact. Technol. 91 , 3211–3223 (2017) [CrossRef] [Google Scholar]
  11. M. Al Bashir, M. Mia, N.R. Dhar, Effect of pulse Jet MQL in surface milling of hardened steel, J. Mech. Eng. 45 , 67–72 (2016) [CrossRef] [Google Scholar]
  12. A. Shokrani, V. Dhokia, S.T. Newman, Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids, Int. J. Mach. Tool Manu. 57 , 83–101 (2012) [CrossRef] [Google Scholar]
  13. R. Padmini, P.V. Krishna, G.K.M. Rao, Effectiveness of vegetable oil based nanofluids as potential cutting fluids inturning AISI 1040 steel, Tribol. Int. 94 , 490–501 (2016) [Google Scholar]
  14. A. Das, S.K. Patel, B.B. Biswal, S.R. Das, Performance evaluation of aluminium oxide nano particles in cutting fluid with MQL technique in turning of hardened AISI 4340 alloy steel, Int. J. Eng. Sci. Technol. (2019) https://doi.org/10.24200/SCI.2019.51223.2069 [Google Scholar]
  15. S.U. Gunjal, S.B. Sanap, N.G. Patil, Role of cutting fluids under minimum quantity lubrication An experimental investigation of chip thickness, Mater. Today Proc. (2020) https://doi.org/10.1016/j.matpr.2020.01.090 [Google Scholar]
  16. A. Das, S.K. Patel, B.B. Biswal, N. Sahoo, A. Pradhan, Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Measurement 150 , 107079 (2020) [CrossRef] [Google Scholar]
  17. S. Chinchanikar, S.K. Choudhury, Evaluation of chip-tool interface temperature: effect of tool coating and cutting parameters during turning hardened AISI 4340 ateel, Procedia. Munuf. Sci. 6 , 996–1005 (2014) [CrossRef] [Google Scholar]
  18. N.A. Abukhshim, P.T. Mativenga, M.A. Sheikh, Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining, Int. J. Mach. Tool Manu. 46 , 782–800 (2006) [CrossRef] [Google Scholar]
  19. R. Komanduri, Z.B. Hou, A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and technology, Tribol. Int. 34 , 653–682 (2001) [Google Scholar]
  20. D.O. Sullivan, M. Cotterell, Temperature measurement in single point turning, J. Mater. Process. Tech. 118 , 301–308 (2001) [CrossRef] [Google Scholar]
  21. A. Basti, T. Obikawa, J. Shinozuka, Tools with built-in thin film thermocouple sensors for monitoring cutting temperature, Int. J. Mach. Tool Manuf. 47 , 793–798 (2007) [CrossRef] [Google Scholar]
  22. S. Chinchanikar, S.K. Choudhury, A.P. Kulkarni, Investigation of chip-tool interface temperature during turning of hardened AISI 4340 alloy steel using multi-layer coated carbide inserts, Adv. Mat. Res. 701 , 354–358 (2013) [Google Scholar]
  23. A. Kus, Y. Isik, M.C. Cakir, S. Coşkun, K. Özdemir, Thermocouple and infrared sensor-based measurement of temperature distribution in metal cutting, Sensors 15 , 1274–1291 (2015) [CrossRef] [Google Scholar]
  24. L. Chen, B.L. Tai, R.G. Chaudhari, X. Song, A.J. Shih, Machined surface temperature in hard turning, Int. J. Mach. Tool Manuf. 121 , 10–21 (2017) [CrossRef] [Google Scholar]
  25. C.E. Leshock, Y.C. Shin, Investigation on cutting temperature in turning by a tool-work thermocouple technique, J. Manuf. Sci. Eng. 119 , 502–508 (1997) [Google Scholar]
  26. M.J. Hadad, T. Tawakoli, M.H. Sadeghi, B. Sadeghi, Temperature and energy partition in minimum quantity lubrication-MQL grinding process, Int. J. Mach. Tool Manuf. 54-55 , 10–17 (2012) [CrossRef] [Google Scholar]
  27. M.C. Santos Jr, A.R. Machado, M.A.S. Barrozo, L.M. Neto, E.A.A. Coelho, Influence of thermoelectric junctions on the electrical signals generated by the tool-workpiece thermocouple system in machining, Measurement 46 , 2540–2546 (2013) [CrossRef] [Google Scholar]
  28. M.A. Huda, K. Yamada, A. Hosokawa, T. Ueda, Investigation of temperature at tool-chip interface in turning using two-color pyrometer, J. Manuf. Sci. Eng. 124 , 200–207 (2002) [Google Scholar]
  29. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, Comparative investigation towards machinability improvement in hard turning using coated and uncoated carbide inserts: part I experimental investigation, Adv. Manuf. 6 , 52–70 (2018) [CrossRef] [Google Scholar]
  30. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, Measurement and machinability study under environmentally conscious spray impingement cooling assisted machining, Measurement 135 , 913–927 (2019) [CrossRef] [Google Scholar]
  31. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, Influence of Al2O3 and TiO2 nanofluid on hard turning performance, Int. J. Adv. Manuf. Syst. 106 , 2265–2280 (2020) [Google Scholar]
  32. M. Senthilkumar, A. Prabukarthi, V. Krishnaraj, Machining of CFRP/Ti6Al4V stacks under minimal quantity lubricating condition, J. Mech. Sci. Technol. 32 , 3787–3796 (2018) [CrossRef] [Google Scholar]
  33. M. Ukamanal, P.C. Mishra, A.K. Sahoo, Effects of spray cooling process parameters on machining performance AISI 316 steel: a novel experimental, Exp. Tech. 44 , 19–36 (2020) [Google Scholar]
  34. M. Gosai, S.N. Bhavsar, Experimental study on temperature measurement in turning operation of hardened steel (EN36), Procedia Technol. 23 , 311–318 (2016) [CrossRef] [Google Scholar]
  35. S.D. Ghodam, Temperature measurement of a cutting tool in turning process by using tool work thermocouple, Int. J. Res. Eng. Technol. 03 , 831–835 (2014) [Google Scholar]
  36. M. Sarıkaya, A. Güllü, Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25, J. Clean. Prod. 91 , 347–357 (2015) [Google Scholar]
  37. N. Boubekri, V. Shaikh, Minimum Quantity Lubrication (MQL) in machining: benefits and drawbacks, J. Ind. Intelligent Inform. 3 , 205–209 (2015) [Google Scholar]
  38. R.K. Das, A.K. Sahoo, R. Kumar, A. Panda, Performances of time-controlled pulse minimum quantity lubrication in machining of hard to cut material: a brief review, Mater. Today Proc. 23 , 545–548 (2020) [Google Scholar]
  39. S. Chinchanikar, S.K. Choudhury, Evaluation of chip-tool interface temperature: effect of tool coating and cutting parameters during turning hardened AISI 4340 steel, Procedia. Mater. Sci. 6 , 996–1005 (2014) [CrossRef] [Google Scholar]
  40. D. O'Sullivan, M. Cotterell, Temperature measurement in single point turning, J. Mater. Process. Technol. 118 , 301–308 (2001) [CrossRef] [Google Scholar]
  41. A. Das, S.K. Patel, T.K. Hotta, B.B. Biswal, Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts, Measurement 134 , 123–141 (2019) [CrossRef] [Google Scholar]
  42. T. Ueda, A. Hosokawa, K. Oda, K. Yamada, Temperature on flank face of cutting tool in high speed milling, CIRP Annals 50 , 37–40 (2001) [CrossRef] [Google Scholar]
  43. T. Ueda, M.A. Huda, K. Yamada, K. Nakayama, H. Kudo, Temperature measurement of CBN tool in turning of high hardness steel, CIRP Annals 48 , 63–66 (1999) [CrossRef] [Google Scholar]
  44. A. Das, S.K. Patel, B.B. Biswal, N. Sahoo, A. Pradhan, Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Measurement 150 , 107079 (2020) [CrossRef] [Google Scholar]
  45. S. Patil, S. Jadhav, S. Kekade, A. Supare, A. Powar, R.K.P. Singh, The influence of cutting heat on the surface Integrity during machining of Titanium Alloy Ti6Al4V, Proced. Manufact. 5 , 857–869 (2016) [CrossRef] [Google Scholar]
  46. R. Kumar, A.K. Sahoo, R.K. Das, A.K. Panda, P.C. Mishra, Modelling of flank wear, surface roughness, cutting temperature in sustainable hard turning of AISI D2 steel, Procedia. Manuf. 20 , 406–413 (2018) [Google Scholar]
  47. J. Hou, W. Zhou, H. Duan, G. Yang, H. Xu, N. Zhao, Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy, Int. J. Adv. Manuf. Tech. 70 , 1835–1845 (2014) [CrossRef] [Google Scholar]
  48. J. Hou, N. Zhao, S. Zhu, Influence of cutting speed on flank temperature during face milling of magnesium alloy, Mater. Manuf. Process. 26 , 1059–1063 (2011) [CrossRef] [Google Scholar]
  49. G. Rotella, O.W. Dillon Jr, D. Umbrello, L. Settineri, I.S. Jawahir, The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy, Int. J. Adv. Manuf. Technol. 71 , 47–55 (2014) [Google Scholar]
  50. O. Pereira, P.C. Català, A. Rodríguez, T. Ostra, J.C. Vivancos, A. Rivero, L.N. Lopez-de-Lacalle, The use of hybrid CO2+MQL in machining operations, Procedia. Engg. 132 , 492–499 (2015) [CrossRef] [Google Scholar]
  51. A. Pandey, R. Kumar, A.K. Sahoo, A. Paul, A. Panda, Performance analysis of trihexyltetradecylphosphonium chloride ionic fluid under MQL condition in hard turning, Int. J. Automat. Mech. Eng. 17 , 7626–7647 (2020) [Google Scholar]
  52. R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das, Comparative study on machinability improvement in hard turning using coated and uncoated carbide inserts: part II modeling, multi-response optimization, tool life, and economic aspects, Adv. Manuf. 6 , 155–175 (2018) [CrossRef] [Google Scholar]
  53. A. Nair, S. Kumanan, Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA, Mater. Manufact. Process. 32 , 693–699 (2017) [CrossRef] [Google Scholar]
  54. H.C. Liao, Multi-response optimization using weighted principal component, Int. J. Adv. Manufact. Technol. 27 , 720–725 (2006) [CrossRef] [Google Scholar]
  55. M.R. Ch, V.V.S. Kesava Rao, Application of WPCA & CQL methods in the optimization of multiple responses, Mater. Today: Proceed. 18 , 25–36 (2019) [CrossRef] [Google Scholar]
  56. B.B. Nayak, K. Abhishek, S.S. Mahapatra, D. Das, Application of WPCA based Taguchi method for multi-response optimization of abrasive jet machining process, Mater. Today: Proceed. 5 , 5138–5144 (2018) [CrossRef] [Google Scholar]
  57. R. Kumar, A. Modi, A. Panda, A.K. Sahoo, A. Deep, P.K. Behra, R. Tiwari, Hard turning on JIS S45C structural steel: an experimental, modelling and optimisation approach, Int. J. Automot. Mech. Eng. 16 , 7315–7340 (2019) [CrossRef] [Google Scholar]
  58. S. Swain, I. Panigrahi, A.K. Sahoo, A. Panda, R. Kumar, Effect of tool vibration on flank wear and surface roughness during high-speed machining of 1040 steel, J. Fail. Analys. Preven. 20 , 976–994 (2020) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.