EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 22 (2021) Mechanics & Industry, 22 (2021) 15 References
Open Access
Issue
Mechanics & Industry
Volume 22, 2021
Article Number 15
Number of page(s) 11
DOI https://doi.org/10.1051/meca/2021013
Published online 08 March 2021
  1. T. Shinmura, K. Takazawa, E. Hatano, M. Matsunaga, T. Matsuo, Study on magnetic abrasive finishing, CIRP Annals 39 , 325–328 (1990) [Google Scholar]
  2. L. Heng, Y.J. Kim, S.D. Mun, Review of superfinishing by the magnetic abrasive finishing process, High Speed Machining 3 , 42–55 (2017) [Google Scholar]
  3. K.B. Patel, K. Patel, Magnetic abrasive finishing of AISI52100, International Journal of Trend in Research and Development 1 , 1–8 (2014) [Google Scholar]
  4. M. Smolkin, R. Smolkin, Calculation and analysis of the magnetic force acting on a particle in the magnetic field of separator. Analysis of the equations used in the magnetic methods of separation, IEEE Transactions on Magnetics 42 , 3682–3693 (2006) [Google Scholar]
  5. V.K. Jain, K.K. Saren, V. Raghuram, M.R. Sankar, Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials, The International Journal of Advanced Manufacturing Technology 100 , 1137–1147 (2019) [Google Scholar]
  6. P. Kala, P.M. Pandey, G.C. Verma, V. Sharma, Understanding flexible abrasive brush behavior for double disk magnetic abrasive finishing based on force signature, Journal of Manufacturing Processes 28 , 442–448 (2017) [Google Scholar]
  7. P.K. Basera, V.K. Jain, Reducing downtime of repairing for taper roller bearing by magnetic abrasive finishing (MAF) process, International Journal of Innovation, Management and Technology 4 , 130–136 (2013) [Google Scholar]
  8. L. Samuels, B. Wallace, Effects of type and size of diamond abrasives on material removal rates in metallographic polishing, Metallography 17 , 19–41 (1984) [Google Scholar]
  9. M. Matsunaga, T. Shinmura, K. Takazava, E. Hitano, Study on magnetic abrasive finishing characteristics, CIRP Annals 39, 325–328 (1990) [Google Scholar]
  10. V.K. Jain, P. Kumar, P.K. Behera, S.C. Jayswal, Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process, Wear. 250 , 384–390 (2001) [Google Scholar]
  11. E.A. Khatri, V. Yadava, Modelling and simulation for the prediction of surface roughness in plane magnetic abrasive finishing, International Journal of Industrial and Systems Engineering 3 , 189–210 (2008) [Google Scholar]
  12. S. Yin, T. Shinmura, Vertical vibration-assisted magnetic abrasive finishing and deburring for magnesium alloy, International Journal of Machine Tools and Manufacture 44 , 1297–1303 (2004) [Google Scholar]
  13. R. Mulik, P. Pandey, Experimental investigations and optimization of ultrasonic assisted magnetic abrasive finishing process, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225 , 1347–1362 (2011) [Google Scholar]
  14. P. Kala, P.M. Pandey, Experimental investigations into ultrasonic-assisted double-disk magnetic abrasive finishing of two paramagnetic materials, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 , 1021–1038 (2017) [Google Scholar]
  15. A. Misra, P.M. Pandey, U. Dixit, Modeling and simulation of surface roughness in ultrasonic assisted magnetic abrasive finishing process, International Journal of Mechanical Sciences 133 , 344–356 (2017) [Google Scholar]
  16. A. Misra, P.M. Pandey, U.S. Dixit, A. Roy, V.V. Silberschmidt, Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233 , 411–425 (2019) [Google Scholar]
  17. B.-H. Yan, G.-W. Chang, T.-J. Cheng, R.-T. Hsu, Electrolytic magnetic abrasive finishing, International Journal of Machine Tools and Manufacture 43 , 1355–1366 (2003) [Google Scholar]
  18. T. El-Taweel, Modelling and analysis of hybrid electrochemical turning-magnetic abrasive finishing of 6061 Al/Al 2 O 3 composite, The International Journal of Advanced Manufacturing Technology 37 , 705–714 (2008) [Google Scholar]
  19. J.-D. Kim, M.-S. Choi, Development of the magneto-electrolytic-abrasive polishing system (MEAPS) and finishing characteristics of a Cr-coated roller, International Journal of Machine Tools and Manufacture 37 , 997–1006 (1997) [Google Scholar]
  20. R. Wang, J.H. Park, L. Heng, Y. Kim, J.Y. Jeong, S.D. Mun, Effect of temperature on the magnetic abrasive finishing process of Mg alloy bars, Journal of Mechanical Science and Technology 32 , 2227–2235 (2018) [Google Scholar]
  21. T.H. Smick, S. Richards, G. Ryding, K.H. Purser, Hydrogen implantation with reduced radiation. Google Patents, 2012 [Google Scholar]
  22. E.-S. Lee, J.-W. Park, Y.-H. Moon, Development of ultral clean machining technology with electrolytic polishing process, International Journal of Precision Engineering and Manufacturing 2 , 18–25 (2001) [Google Scholar]
  23. H. Yamaguchi, A.A. Graziano, Surface finishing of cobalt chromium alloy femoral knee components, CIRP Annals 63 , 309–312 (2014) [Google Scholar]
  24. A.A. Graziano, Characteristics of cobalt chromium alloy surfaces finished using magnetic abrasive finishing, University of Florida, 2013 [Google Scholar]
  25. F.A. Shah, M. Trobos, P. Thomsen, A. Palmquist, Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants—Is one truly better than the other? Materials Science and Engineering: C 62 , 960–966 (2016) [Google Scholar]
  26. A. Sarmiento-González, J.M. Marchante-Gayón, J.M. Tejerina-Lobo, J. Paz-Jiménez, A. Sanz-Medel, High-resolution ICP–MS determination of Ti, V, Cr, Co, Ni, and Mo in human blood and urine of patients implanted with a hip or knee prosthesis, Analytical and bioanalytical chemistry 391 , 2583–2589 (2008) [PubMed] [Google Scholar]
  27. A. Sarmiento-González, J.R. Encinar, J.M. Marchante-Gayón, A. Sanz-Medel, Titanium levels in the organs and blood of rats with a titanium implant, in the absence of wear, as determined by double-focusing ICP-MS, Analytical and Bioanalytical Chemistry 393 , 335 (2009) [PubMed] [Google Scholar]
  28. S. Yerramareddy, S. Bahadur, The effect of laser surface treatments on the tribological behavior of Ti-6Al-4V, Wear 157 , 245–262 (1992) [Google Scholar]
  29. G.D. Revankar, R. Shetty, S.S. Rao, V.N. Gaitonde, Wear resistance enhancement of titanium alloy (Ti-6Al-4V) by ball burnishing process, Journal of Materials Research and Technology 6 , 13–32 (2017) [Google Scholar]
  30. S. Mukherjee, Applied mineralogy: applications in industry and environment, Springer Science & Business Media, 2012 [Google Scholar]
  31. G.E. Box, J.S. Hunter, W.G. Hunter, Statistics for experimenters, Wiley Series in Probability and Statistics. Wiley Hoboken, NJ, USA, 2005 [Google Scholar]
  32. S.J. Wang, S. To, C.F. Cheung, Effect of Workpiece Material on Surface Roughness in Ultraprecision Raster Milling, Materials and Manufacturing Processes 27 , 1022–1028 (2012) [Google Scholar]
  33. S. James, M.M. Sundaram, Modeling of material removal rate in vibration assisted nano impact-machining by loose abrasives, Journal of Manufacturing Science and Engineering 137 , 021008 (2015) [Google Scholar]
  34. H. Fang, P. Guo, J. Yu, Surface roughness and material removal in fluid jet polishing, Applied Optics 45 , 4012–4019 (2006) [PubMed] [Google Scholar]
  35. T.-R. Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, The International Journal of Advanced Manufacturing Technology 32 , 675 (2007) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.