Open Access
Issue
Mechanics & Industry
Volume 22, 2021
Article Number 36
Number of page(s) 11
DOI https://doi.org/10.1051/meca/2021033
Published online 28 May 2021
  1. G.F. Wang, H. Wang, H. Ren et al., Smart coal mine 2025 scenario goal and development path, J. Coal Ind. 43, 295–305 (2018) [Google Scholar]
  2. H.T. Zhang, Y.J. Dai, Y.J. Jia, The design of disc brake for mine hoist in civil engineering, Adv. Mater. Res. 1943, 212–215 (2012) [Google Scholar]
  3. Q. Wang, C. Zhang, Q. Shuang, The study on electro-hydraulic proportional relief valve of disc braking system based on AMESim, in International Conference on Intelligent Systems Research & Mechatronics Engineering (2015) [Google Scholar]
  4. X.F. Wang, X.M. Xiao, X.Y. Zhang, Research for dynamic characteristics of electro-hydraulic proportional relief valve based on AMESim, Adv. Mater. Res. 466-467, 518–522 (2012) [Google Scholar]
  5. M. Ungureanu, N. Ungureanu, Wear intensity of mine hoist brake materials, Tehnički Vjesnik 24, 585–589 (2017) [Google Scholar]
  6. M. Kumar, X. Boidin, Y. Desplanques et al., Influence of various metallic fillers in friction materials on hot-spot appearance during stop braking, Wear 270, 371–381 (2011) [Google Scholar]
  7. D. Wang, R. Wang, J. Zhang, Dynamic brake characteristics of disc brake during emergency braking of the kilometer deep coal mine hoist, Adv. Mech. Eng. 12, 1–23 (2020) [Google Scholar]
  8. D. Wang, J. Yin, Z. Zhu, Preparation of high friction brake shoe material and its tribological behaviors during emergency braking in ultra-deep coal mine hoist, Wear 458, 203391 (2020) [Google Scholar]
  9. Y. Zhang, G. Xu, X. Zhang, Design and research of the disc brake of mine hoists for monitoring the disc spring force and positive brake pressure, Measur. Sci. Technol. 30, 25903 (2019) [Google Scholar]
  10. G. Xu, D. Song, D. Zhang, A novel mechanical design of disc brakes for fault diagnosis and monitoring positive braking pressure in mine hoist, Adv. Mech. Eng. 11, 1–16 (2019) [Google Scholar]
  11. Z. Jiao, X. Zhang, Y. Shang, A power-by-wire aircraft brake system based on high-speed on-off valves, Aerospace Sci. Technol. 106, 106177 (2020) [Google Scholar]
  12. J. Deng, K. Hu, B. Lu, Influence of B 4C on oxidation resistance of PSN/borosilicate Glass-B 4C field-based repair coating of C/C aircraft brake materials at 700‑900 °C, Ceram. Int. 45, 20860–20872 (2019) [Google Scholar]
  13. C. Zhang, L. Zhang, Q. Zeng, Simulated three-dimensional transient temperature field during aircraft braking for C/Si C composite brake dis, Mater. Des. 32, 2590–2595 (2011) [Google Scholar]
  14. S. Wolny, Braking distance of hoist conveyances required for safe stopping under the conditions of emergency braking, Arch. Min. Sci. 62, 279–288 (2017) [Google Scholar]
  15. X. Wei, Q. Yin, H. Nie et al., Aircraft electric anti-skid braking system based on fuzzy-PID controller with parameter self-adjustment feature, Trans. Nanjing Univ. Aeronaut. Astron. 31, 111–118 (2014) [Google Scholar]
  16. A. Trentin, P. Zanchetta, P. Wheeler, J. Clare, Power flow analysis in electro-mechanical actuators for civil aircraft, Iet Electric Power Appl. 5, 48–58 (2011) [Google Scholar]
  17. Y. Hye, Ryu, M. Ki, Implementation of Electro-Mechanical Brake (EMB) for brake-by-wire system of electric vehicle, J. Korean Soc. Ind. Converg. 20, 313–323 (2017) [Google Scholar]
  18. L. Chris, M. Chris, G. Malcolm, Control of an electromechanical brake for automotive brake-by-wire systems with an adapted motion control architecture, SAE Technical Paper (2004) [Google Scholar]
  19. G. Park, S. Choi, Clamping force control based on dynamic model estimation for electro-mechanical brakes, J. Automobile Eng. 232, 2000–2013 (2018) [Google Scholar]
  20. C. Lee, C. Manzie, Active brake judder attention using an electromechanical brake-by-wire system, IEEE-ASME Trans. Mech. 21, 2964–2976 (2016) [Google Scholar]
  21. M. Atia, S. Haggag, A. Kamal, Enhanced electro-mechanical brake-by-wire system using sliding mode controller, J. Dyn. Syst. Measur. Control 138, 041003 (2016) [Google Scholar]
  22. B. Sababha, Y. Alqudah, A reconfiguration-based fault-tolerant anti-lock brake-by-wire system, ACM Trans. Embedded Comput. Systems (TECS) 17, 1–13 (2018) [Google Scholar]
  23. K. Park, S. Heo, A study on the brake-by-wire system using hardware-in-the-loop simulation, Int. J. Vehicle Des. 36, 38–49 (2004) [Google Scholar]
  24. W. Andrew, Homer, Coal mine safety regulation in China and the USA, J. Contemp. Asia 39, 424–439 (2009) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.