Open Access
Mechanics & Industry
Volume 23, 2022
Article Number 11
Number of page(s) 8
Published online 21 June 2022
  1. D. Ao, J. Gao, X. Chu, S. Lin, J. Lin, Formability and deformation mechanism of Ti-6Al-4V sheet under electropulsing assisted incremental forming, Int. J. Solids. Struct. 202, 357–367 (2020) [CrossRef] [Google Scholar]
  2. B. Saidi, L. Giraud Moreau, A. Cherouat, R. Nasri, Experimental and numerical study on warm single-point incremental sheet forming (WSPIF) of titanium alloy Ti-6Al-4V, using cartridge heaters, J. Braz. Soc. Mech. Sci. 43, 1–15 (2020) [Google Scholar]
  3. C. Xu, Y. Li, Z. Wang, Z. Cheng, F. Liu, The influence of self-lubricating coating during incremental sheet forming of TA1 sheet, Int. J. Adv. Manuf. Tech. 110, 2465–2477 (2020) [CrossRef] [Google Scholar]
  4. R. Mohanraj, S. Elangovan, Thermal modeling and experimental investigation on the influences of the process parameters on warm incremental sheet metal forming of titanium grade 2 using electric heating technique, Int. J. Adv. Manuf. Tech. 110, 255–274 (2020) [CrossRef] [Google Scholar]
  5. R. Wu, M. Li, X. Liu, S. Cai, J. Chen, Characterization of material flow in friction stir-assisted incremental forming with synchronous bonding of dissimilar sheet metals, Int. J. Adv. Manuf. Tech. 109, 2523–2534 (2020) [CrossRef] [Google Scholar]
  6. C. Veera Ajay, Parameter optimization in incremental forming of titanium alloy material, Trans. Indian Inst. Met. 73, 2403–2413 (2020) [CrossRef] [Google Scholar]
  7. E. Rasoul, K. Hyunki, P. Taejoon, P. Farhang, A. Akshat, A. Fadi, Effect of hardening law and process parameters on finite element simulation of single point incremental forming (SPIF) of 7075 aluminum alloy sheet, Mech. Ind. 21, 1–13 (2020) [Google Scholar]
  8. G. Ambrogio, L. Filice, F. Gagliardi, Formability of lightweight alloys by hot incremental sheet forming, Mater. Design. 34, 501–508 (2012) [CrossRef] [Google Scholar]
  9. G. Fan, L. Gao, Mechanical property of Ti-6Al-4V sheet in one-sided electric hot incremental forming, Int. J. Adv. Manuf. Tech. 72, 989–994 (2014) [CrossRef] [Google Scholar]
  10. C.S. Magnus, Joule heating of the forming zone in incremental sheet metal forming: part 1, Int. J. Adv. Manuf. Tech. 91, 1309–1319 (2017) [CrossRef] [Google Scholar]
  11. C.S. Magnus, Joule heating of the forming zone in incremental sheet metal forming: part 2, Int. J. Adv. Manuf. Tech. 89, 295–309 (2017) [CrossRef] [Google Scholar]
  12. J. Min, P. Seim, D. Störkle, L. Thyssen, B. Kuhlenkötter, Thermal modeling in electricity assisted incremental sheet forming, Int. J. Mater. Form. 10, 729–739 (2017) [CrossRef] [Google Scholar]
  13. X. Shi, L. Gao, H. Khalatbari, Y. Xu, H. Wang, L. Jin, Electric hot incremental forming of low carbon steel sheet: accuracy improvement, Int. J. Adv. Manuf. Tech. 68, 241–247 (2013) [CrossRef] [Google Scholar]
  14. T. Cao, B. Lu, H. Ou, H. Long, J. Chen, Investigation on a new hole-flanging approach by incremental sheet forming through a featured tool, Int. J. Mach. Tool. Manu. 110, 1–17 (2016) [CrossRef] [Google Scholar]
  15. M. Silva, M. Skjoedt, P. Martins, N. Bay, Revisiting the fundamentals of single point incremental forming by means of membrane analysis, Int. J. Mach. Tool. Manu. 48, 73–83 (2008) [CrossRef] [Google Scholar]
  16. J. Duflou, Y. Tunckol, A. Szekeres, P. Vanherck, Experimental study on force measurements for single point incremental forming, J. Mater. Process. Tech. 189, 65–72 (2007) [CrossRef] [Google Scholar]
  17. M. Honarpisheh, M.J. Abdolhoseini, S. Amini, Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current, Int. J. Adv. Manuf. Tech. 83, 2027–2037 (2016) [CrossRef] [Google Scholar]
  18. Z. Chang, M. Li, J. Chen, Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes, Int. J. Mach. Tool. Manu. 140, 62–76 (2019) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.