EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 23 (2022) Mechanics & Industry, 23 (2022) 8 References
Open Access
Issue
Mechanics & Industry
Volume 23, 2022
Article Number 8
Number of page(s) 13
DOI https://doi.org/10.1051/meca/2022007
Published online 08 June 2022
  1. A. Gangopadhyay, A review of automotive engine friction reduction opportunities through technologies related to tribology, Transactions of the Indian Institute of Metals 70, 527–535 (2017) [CrossRef] [Google Scholar]
  2. J. Sun, X. Zhang, J. Zhu et al., On the lubrication characteristics of piston ring under different engine operation conditions, Industrial Lubrication and Tribology 72, 101–108 (2019) [Google Scholar]
  3. T. Cheng, J. Wang, S. Yao, Resecorch on Simulation and Optimization Process of a Certain Piston Ring Set Based on AVL-P&R, Diesel Engine 37, 11–15 (2015) [Google Scholar]
  4. G. Liu, J. Sun, A Review of Research on the Lubrication of the Piston Assembly-Cylinder Friction Pair in Internal Combustion Engines, Chinese journal of automotive engineering 9, 1–12 (2019) [Google Scholar]
  5. A. Rosenkranz, P.G. Grutzmacher, C. Gachot, H.L. Costa, Surface Texturing in Machine Elements - A Critical Discussion for Rolling and Sliding Contacts, Advanced Engineering Materials 21, 1900194 (2019) [CrossRef] [Google Scholar]
  6. X. Li, J. Zhao, Y. Li, G. Zhu, R. Xie, Influence of Surface Morphology of Piston Ring on Its Friction and Sealing Performances, Lubrication Engineering 46, 70–76 (2021) [Google Scholar]
  7. H. Wu, W. Guo, S. Yin, X. Liang, Study on the Effect of Textured Inner Surface of Cylinder on the Lubrication Performance of Piston Ring, Machine Tool & Hydraulics (2020) [Google Scholar]
  8. X. Rao, C. Sheng, Z. Guo, Research on the Friction and Wear Properties of Diesel Engine Cylinder Liner with Different Surface Textures, Acta Armamentarii 39, 356–363 (2018) [Google Scholar]
  9. X.R. Liu, G.X. Li, S.Z. Bai, Y.P. Hu, Mixed Lubrication and Friction Power Loss of Piston Ring Pack, Applied Mechanics and Materials. Trans Tech Publ, 2014, pp. 205–208 [Google Scholar]
  10. N. Patir, H. Cheng, An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication (1978) [Google Scholar]
  11. J. Fei, H. Luo, B. Zuo, Z. Wei, Y. Yang, H. Xu, Z. Li, An Overview of Numerical Methods for Reynolds Equation, Lubrication Engineering 45, 130–140 (2020) [Google Scholar]
  12. J.A. Greenwood, J. Tripp, The contact of two nominally flat rough surfaces, Proceedings of the institution of mechanical engineers 185, 625–633 (1970) [CrossRef] [Google Scholar]
  13. X. Ye, Three-dimensional numerical simulation of piston ring lubrication and its application, Huazhong University of Science and Technology, 2004 [Google Scholar]
  14. D. Wang, W. Ji, Q. Zhou, C. Zhang, Simulation of Combustion Process in Swirl Chamber of Diesel Engine, Transactions of the chinese society for agricultural machinery. 38, 49–52 (2007) [Google Scholar]
  15. B. Jiao, T. Li, X. Ma, C. Wang, H. Xu, X. Lu, Z. Liu, Lubrication analysis of the piston ring of a two-stroke marine diesel engine considering thermal effects, Engineering Failure Analysis 129, 105659 (2021) [CrossRef] [Google Scholar]
  16. H. Si, M. Li, W. Bai, C. Qi, J. Chu, Deformation analysis of the cylinder liner of a certain diesel engine in pre-tightening and working condition, Railway Locomotive and Motor Car, 14–17 (2018) [Google Scholar]
  17. X. Wang, Z. Yan, J. Zhou, Analytical and Experimental Method of Thermal Load Estimation for Diesel Engine Cylinder Liner, Chinese internal combustion engine engineering 22, 62–65 (2001) [Google Scholar]
  18. J. Wang, L. Shen, Y. Yang, Y. Bi, M. Wan, Optimizing calibration of design points for non-road high pressure common rail diesel engine base on response surface methodology, Transactions of the Chinese Society of Agricultural Engineering 33 (2017) [Google Scholar]
  19. C. Dai, F. Kong, L. Dong, J. Wang, Y. Bai, Hydraulic and acoustic property optimization for centrifugal pump as turbine based on response surface method, Transactions of the Chinese Society of Agricultural Engineering 31, 40–47 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.