Open Access
Mechanics & Industry
Volume 23, 2022
Article Number 19
Number of page(s) 13
Published online 01 August 2022
  1. T.A. Harris, M.N. Kotzalas, Rolling Bearing Analysis: Advanced Concepts of Bearing Technology, fifth ed. (Taylor & Francis, Florida, 2007) [Google Scholar]
  2. X. Xie, J. Xu, J. Luo, Analysis of skid damage to cylindrical roller bearing of mainshaft of aeroengine, J. Mech. Sci. Technol. 34 , 3239–3247 (2020) [CrossRef] [Google Scholar]
  3. S.J. Kim, Analytical consideration of the radial clearance to reduce cage slip of the turbo engine roller bearing, J. Mech. Sci. Technol. 35 , 2827–2839 (2021) [CrossRef] [Google Scholar]
  4. A. Chudzik, B. Warda, Effect of radial internal clearance on the fatigue life of the radial cylindrical roller bearing, Ekspolatacja i Niezawodnosc Maintenance Reliab. 21 , 211–219 (2019) [CrossRef] [Google Scholar]
  5. Z.H. Ye, L.Q. Wang, Effect of tilted misalignment on loading characteristics of cylindrical roller bearings, Mech. Mach. Theory 69 , 142–155 (2013) [CrossRef] [Google Scholar]
  6. X.L. Ren, J. Zhai, Calculation of radial load distribution on ball and roller bearings with positive, negative and zero clearance, Int. J. Mech. Sci. 131-132 , 1–7 (2017) [CrossRef] [Google Scholar]
  7. F.B. Oswald, E.V. Zaretsky, Effect of internal clearance on load distribution and life of radially loaded ball and roller bearings, Tribol. Trans. 55 , 245–265 (2012) [CrossRef] [Google Scholar]
  8. T. Lazovic, M. Ristivojevic, Mathematical model of load distribution in rolling bearing, FME Trans. 36 , 189–196 (2008) [Google Scholar]
  9. T. Nagatomo, K. Takahashi, Effects of load distribution on life of radial roller bearings, J. Tribol. 134 , 1–7 (2012) [CrossRef] [Google Scholar]
  10. G. Chen, F. Mao, Effects of off-sized cylindrical rollers on the static load distribution in a cylinder roller bearing, Proc. Inst. Mech. Eng. J 226 , 687–696 (2012) [CrossRef] [Google Scholar]
  11. R. Tomovic, Investigation of the effect of rolling bearing construction on internal load distribution and the number of active rolling elements, Adv. Mater. Res. 633 , 103–116 (2013) [CrossRef] [Google Scholar]
  12. X. Hao, X.X. Gu, Distribution characteristics of stress and displacement of rings of cylindrical roller bearing, J. Mech. Eng. Sci. 233 , 4348–4358 (2018) [Google Scholar]
  13. N. Demirhan, B. Kanber, Stress and displacement distributions on cylindrical roller bearing rings using FEM, Mech. Based Des. Struct. Mach. 36 , 86–102 (2008) [CrossRef] [Google Scholar]
  14. G. Cavallaro, D. Nelias, Analysis of high-speed intershaft cylindrical roller bearing with flexible rings, Tribol. Trans. 48 , 153–167 (2005) [Google Scholar]
  15. F.B. Oswald, E.V. Zaretsky, Effect of roller geometry on roller bearing load-life relation, Tribol. Trans. 57 , 928–938 (2014) [CrossRef] [Google Scholar]
  16. H. Fujiwara, T. Kobayashi, Optimized logarithmic roller crowning design of cylindrical roller bearings and its experimental demonstration, Tribol. Trans. 53 , 909–916 (2010) [CrossRef] [Google Scholar]
  17. S.E. Deng, Y.J. Lu, Cage slip characteristics of a cylindrical roller bearing with a trilobe-raceway, Chin. J. Aeronaut. 879 , 1–12 (2017) [Google Scholar]
  18. S. Kabus, M.R. Hansen, A new quasi-static multi-degree of freedom tapered roller bearing model to accurately consider non-Hertzian contact pressures in time-domain simulations, Proc. Inst. Mech. Eng. K 228 , 111–125 (2014) [CrossRef] [Google Scholar]
  19. V.C. Tong, S.W. Hong, Characteristics of tapered roller bearing subjected to combined radial and moment loads, Int. J. Precis. Eng. Manufactur. Green Technol. 1 , 323–328 (2014) [CrossRef] [Google Scholar]
  20. S. Deng, J. Gu, Y. Cui, W. Zhang, Dynamic analysis of a tapered roller bearing, Ind. Lubric. Tribol. 70 , 191–200 (2018) [CrossRef] [Google Scholar]
  21. J.M. de Mul, J.M. Vree, Equilibrium and associated load distribution in ball and roller bearings loaded in five degrees of freedom while neglecting friction, J. Tribol. 111 , 153–167 (1989) [Google Scholar]
  22. S.W. Kwon, V.C. Tong, S.W. Hong, Five-degrees-of-freedom model for static analysis of linear roller bearing subjected to external loading, Proc. Inst. Mech. Eng. C 233 , 2920–2938 (2018) [Google Scholar]
  23. X. Shi, L. Wang, TEHL analysis of high-speed and heavy-load roller bearing with quasi-dynamic characteristics, Chin. J. Aeronaut. 28 , 1296–1304 (2015) [CrossRef] [Google Scholar]
  24. H. Zhang, W. Shi, G. Liu, Z. Chen, A method to solve the stiffness of double-row tapered roller bearing, Math. Probl. Eng. 1–13 (2019) [Google Scholar]
  25. T. Nakata, N. Takahashi, K. Fujiwara, N. Okamoto, K. Muramatsu, Improvements of convergence characteristics of Newton-Raphson method for nonlinear magnetic field analysis, IEEE Trans. Magn. 28 , 1048–1051 (1992) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.