EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 24 (2023) Mechanics & Industry, 24 (2023) 23 References
Open Access
Issue
Mechanics & Industry
Volume 24, 2023
Article Number 23
Number of page(s) 9
DOI https://doi.org/10.1051/meca/2023024
Published online 27 July 2023
  1. M. Merklein, M. Wieland, M. Lechner, S. Bruschi, A. Ghiotti, Hot stamping of boron steel sheets with tailored properties: a review, J. Mater. Process. Technol. 228, 11–24 (2016) [CrossRef] [Google Scholar]
  2. K. Mori, Y. Okuda Y, Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution, CIRP Ann. Manuf. Technol. 59, 291–294 (2010) [CrossRef] [Google Scholar]
  3. R. George, A. Bardelcik, MJ Worswick Hot forming of boron steels using heated and cooled tooling for tailored properties, J. Mate. Process. Technol. 212, 2386–2399 (2012) [CrossRef] [Google Scholar]
  4. B. Tang, S. Bruschi, A. Ghiotti, P.F. Bariani, Numerical modelling of the tailored tempering process applied to 22MnB5 sheets, Finite Elem. Anal. Des. 81, 69–81 (2014) [CrossRef] [Google Scholar]
  5. Y. Nakagawa, K. Mori, Y. Suzuki, Y. Shimizu, Tailored tempering without die heating in hot stamping of ultra-high strength steel parts, Mater. Des. 192, 108704 (2020) [CrossRef] [Google Scholar]
  6. A. Horn, M. Merklein, Functional optimization of hot-stamped components by local carburization, International J. Lightweight Mater. Manuf. 3, 43–54 (2020) [Google Scholar]
  7. J.G. Speer, E. De Moor, K.O. Findley, D.K. Matlock,B.C. De Cooman,D.V. Edmonds, Analysis of microstructure evolution in quenching and partitioning automotive sheet steel, Metall. Mater. Trans, A 42, 3591 (2011) [CrossRef] [Google Scholar]
  8. Z. Wang, K. Wang, Y. Liu, B. Zhu, Y. Zhang, S. Li, Multi-scale simulation for hot stamping quenching & partitioning process of high-strength steel, J. Mater. Process. Technol. 269, 150–162 (2019). [CrossRef] [Google Scholar]
  9. B. Zhu, J. Zhu,Y. Wang, B. Rolfe, Z. Wang,Y. Zhang, Combined hot stamping and Q&P processing with a hot air partitioning device, J. Mater. Process. Technol. 262, 392–402 (2018) [CrossRef] [Google Scholar]
  10. W. Ding, Y. Gong, A. Lu, J. Wang, Z. Wang, W. Li, X. Jin, Improve bendability of a Cr-alloyed press-hardening steel through an in-line quenching and non-isothermal partitioning process, J. Manuf. Processes 84, 481–493 (2022) [CrossRef] [Google Scholar]
  11. M. Ganapathy, N. Li, J. Lin, M. Abspoel, D. Bhattacharjee, Experimental investigation of a new low-temperature hot stamping process for boron steels, Int. J. Adv. Manuf. Technol. 105, 669–682 (2019) [CrossRef] [Google Scholar]
  12. M. Ganapathy, N. Li, J. Lin, D. Bhattacharjee, A feasibility study on warm forming of an as-quenched 22MnB5 boron steel, Int. J. Lightweight Mater. Manuf. 3, 277–283 (2020) [Google Scholar]
  13. C. Tong, V.A. Hardley, Z. Shi, Q. Rong, X. Li, B. Zhang, D. Xu, J.Lin, Investigation of the effect of initial states of medium-Mn steel on deformation behaviour under hot stamping conditions, Mater. Sci. Eng. A 855, 143914 (2022) [CrossRef] [Google Scholar]
  14. C. Schlaseman, J. Cunningham, L. Elwell, W. Dykema, H. Deegala, S. Harp, T. King, L. Lichtenauer, R. Parthasaranthi, E. ten Siethoff, Application of Advanced Construction Technologies to New Nuclear Power Plants, U.S. Department of Energy, 2004 [Google Scholar]
  15. X. Guo, K. Jin, H. Wang, W. Pei, F. Ma, J. Tao, N. Kim, N. Numerical simulations and experiments on fabricating bend pipes by push bending with local induction-heating process, Int. J. Adv. Manuf. Technol. 84, 2689–2695 (2016) [CrossRef] [Google Scholar]
  16. Q. Han, Z. Han, Y. Lu, Experimental and numerical investigations on residual stresses in hot-bent circular steel tube, J. Construct. Steel Res. 161, 31–46 (2019) [CrossRef] [Google Scholar]
  17. N. Shimada, A. Tomizawa, H. Kubota, H. Mori, M. Hara, M., Kuwayama, S. Development of three-dimensional hot bending and direct quench technology. Procedia Eng. 81, 2267–2272 (2014) [CrossRef] [Google Scholar]
  18. E. Simonetto, A. Ghiotti, S. Bruschi, High accuracy direct hot bending of hollow profiles. Manuf. Lett. 27, 63–66 (2021) [CrossRef] [Google Scholar]
  19. E. Simonetto, A. Ghiotti, S. Bruschi, Numerical modelling of direct hot tube rotary draw bending of 22MnB5 high strength steel, CIRP J. Manuf. Sci. Technol. 37, 547–558 (2022) [CrossRef] [Google Scholar]
  20. A.R. Park, J.H. Nam, M. Kim, I.S. Jang, Y.K. Lee, Evaluations of tensile properties as a function of austenitizing temperature and springback by V-bending testing in medium-Mn steels, Mater. Sci. Eng. A 787, 139534 (2020) [CrossRef] [Google Scholar]
  21. M. Loh-Mousavi, M. AhmadiRad, T. Maeno, D.J. Politis, L. Wang, Coupled thermal-electrical finite element analysis of electrical resistance heating in hot stamping of ultra-high strength steel tubes, Procedia Manuf. 15, 1047–1054 (2018) [CrossRef] [Google Scholar]
  22. A Talebi-Anaraki, T. Maeno, R. Ikeda, K Morishita, I.K. Mori, Quenchability improvement and control simplification by ice mandrel in hot stamping of ultra-high strength steel hollow parts, J. Manuf. Processes 64, 916–926 (2021) [CrossRef] [Google Scholar]
  23. A. Paul, M. Strano, The influence of process variables on the gas forming and press hardening of steel tubes, J. Mater. Process. Technol. 228, 160–169 (2016) [CrossRef] [Google Scholar]
  24. K. Zheng, J.H. Zheng, Z. He, G. Liu, D.J. Politis, L. Wang, Fundamentals, processes and equipment for hot medium pressure forming of light material tubular components, Int. J. Lightweight Mater. Manuf. 3, 1–19 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.