EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 25 (2024) Mechanics & Industry, 25 (2024) 30 References
Issue
Mechanics & Industry
Volume 25, 2024
Advanced Approaches in Manufacturing Engineering and Technologies Design
Article Number 30
Number of page(s) 14
DOI https://doi.org/10.1051/meca/2024025
Published online 19 November 2024
  1. A.S. Luyt, SS. Malik, 16-Can biodegradable plastics solve plastic solid waste accumulation? in Plastics Design Library, Plastics to Energy, edited by S.M. Al-Salem (William Andrew Publishing, 2019), pp. 403–423. https://doi.org/10.1016/B978-0-12-813140-4.00016-9 [Google Scholar]
  2. N. Karak, 2 − Biodegradable polymers, in Vegetable Oil-Based Polymers, edited by N. Karak (Woodhead Publishing, 2012), 31–53. https://doi.org/10.1533/9780857097149.31 [Google Scholar]
  3. E. Petrovicova, L.S. Schadler, (2002). Thermal spraying of polymers, Int. Mater. Rev., 47, 169–190, (2002). [CrossRef] [Google Scholar]
  4. R. Gonzalez, H. Ashrafizadeh, A. Lopera, P. Mertiny, A. McDonald, A review of thermal spray metallization of polymer-based structures, J. Therm. Spray. Technol. 25, 897–919 (2016) [CrossRef] [Google Scholar]
  5. Y. Shacham-Diamand, T. Osaka, Y. Okinaka, A. Sugiyama, V. Dubin, 30 years of electroless plating for semiconductor and polymer micro-systems, Microelectron. Eng. 132, 35–45 (2015) [CrossRef] [Google Scholar]
  6. S. Ghosh, Electroless copper deposition: a critical review, Thin Solid Films 669, 641–658 (2019) [CrossRef] [Google Scholar]
  7. M.O. Mavukkandy, S.A. McBride, D.M. Warsinger, N. Dizge, S.W. Hasan, H.A. Arafat, Thin film deposition techniques for polymeric membranes − a review, J. Memb. Sci. 610, 118258 (2020) [CrossRef] [Google Scholar]
  8. A.A. Ferreira, F.J.G. Silva, A.G. Pinto, V.F.C. Sousa, Characterization of thin chromium coatings produced by PVD sputtering for optical applications, Coatings 11, 1–20 (2021) [Google Scholar]
  9. H. Ye, J. Wang, Preparation of aluminum coating on lexan by cold spray, Mater. Lett. 137, 21–24 (2014) [CrossRef] [Google Scholar]
  10. M. Meador, Coatings for high temperature polymer composites, in: Proceedings of the 46th International SAMPE Symposium and Exhibition (2001) p. 572 [Google Scholar]
  11. A. Liu, M. Guo, J. Gao, Influence of bond coat on shear adhesion strength of erosion and thermal resistant coating for carbon fiber reinforced thermosetting polyimide, Surf. Coat. Technol. 201, 2696 (2006) [CrossRef] [Google Scholar]
  12. D.R. Harding, J.K. Sutter, M.A. Schuerman, E.A. Crane, Oxidation protective barrier coatings for high temperature polymer matrix composites, J. Mater. Res. 9, 1583 (1994) [CrossRef] [Google Scholar]
  13. D. Giraud, F. Borit, V. Guipont, M. Jeandin, J.M. Malhaire, Metallization of a polymer using cold spray: application to aluminum coating of polyamide 66, in International Thermal Spray Conference 2012 (Houston, TX) (2012) pp. 265–270 [Google Scholar]
  14. M. Suarez, S. Bellayer, M. Traisnel, W. Gonzalez, D. Chicot, J. Lesage, E.S. Puchi-Cabrera, M.H. Staia, Corrosion behavior of Cr3C2-NiCr vacuum plasma sprayed coatings, Surf. Coat. Technol. 202, 4566–4571 (2008) [CrossRef] [Google Scholar]
  15. V. Matikainen, G. Bolelli, H. Koivuluoto, P. Sassatelli, L. Lusvarghi, P. Vuoristo, Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings Wear 388-389, 57–71 (2017) [Google Scholar]
  16. Z. Lu, S.W. Myoung, E.H. Kim, J. Lee, Y.G. Hand Jung, Microstructure evolution and thermal durability with coating thickness in APS thermal barrier coatings, Mater. Today Proc. 1, 35–43 (2014) [CrossRef] [Google Scholar]
  17. A. Wypych, P. Siwak, D. Andrzejewski, J. Jakubowicz, Titanium Plasma-sprayed coatings on polymers for hard tissue applications, Materials 11, 2536 (2018) [CrossRef] [PubMed] [Google Scholar]
  18. E. Gariboldi, L. Rovatti, N. Lecis, L. Mondora, G.A. Mondora, Tribological and mechanical behaviour of Cr3C2-NiCr thermally sprayed coatings after prolonged aging, Surf. Coat. Technol. 305, 83–92 (2016) [CrossRef] [Google Scholar]
  19. Y.C. Tsui, T.W. Clyne, An analytical model for predicting residual stresses in progressively deposited coatings Part 1: Planar geometry, Thin Solid Films 306, 23–33 (1997) [CrossRef] [Google Scholar]
  20. M.M. Aung, J.L. Wong, N.L. Hong, Improvement of anticorrosion coating properties in bio-based polymer epoxy acrylate incorporated with nano zinc oxide particles, Ind. Eng. Chem. Res. 59, 1753–1763 (2020) [CrossRef] [Google Scholar]
  21. V. Shkirskiy, M. Uebel, A. Maltseva, G. Lefèvre, P. Volovitch, M. Rohwerder, Cathodic driven coating delamination suppressed by inhibition of cation migration along Zn polymer interface in atmospheric CO2, npj Mater. Degrad. 3, 2 (2019) [Google Scholar]
  22. C.M.K. Praveen, L. Avinash, C. Manjunath Patel Gowdru, D.Y. Pimenov, G. Khaled, Electrodeposition based preparation of Zn-Ni alloy and Zn-Ni-WC nano-composite coatings for corrosion-resistant applications, Coatings 11, 712 (2021) [CrossRef] [Google Scholar]
  23. Thermal Spray Materials Guide. Available online: https://www.oerlikon.com/ecomaXL/files/oerlikon_BRO-0001.17_TS_ MaterialGuide_EN.pdf (accessed on 4 June 2023) [Google Scholar]
  24. A. Rajkovic, M. Uyttendaele, W. Deley, A. Van Soom, T. Rijsselaere, J. Debevere, Dynamics of boar semen motility inhibition as a semi-quantitative measurement of Bacillus cereus emetic toxin (Cereulide), J. Microbiol. Methods 65, 525–534 (2006) [CrossRef] [Google Scholar]
  25. S.-N. Mazurchevici, A. Marguta, B. Istrate, M. Benchea, M. Boca, D. Nedelcu, Improvements of Arboblend V2 nature characteristics through depositing thin ceramic layers, Polymers 13, 3765 (2021) [CrossRef] [Google Scholar]
  26. D. Nedelcu, A. Marguta, S. Mazurchevici, C. Munteanu, B. Istrate, Micro-structural and morphological analyses of coated ‘liquid wood’ samples by ceramic particles, Mater. Res. Express 6, 085326 (2019) [CrossRef] [Google Scholar]
  27. N. Huonnic, M. Abdelghani, P. Mertiny, A. McDonald, Deposition and characterization of flame-sprayed aluminum on cured glass and basalt fiber-reinforced epoxy tubes, Surf. Coat. Technol. 205, 867–873 (2010) [CrossRef] [Google Scholar]
  28. J. Voyer, P. Schulz, M. Schreiber, Conducting flame-sprayed Al coatings on textile fabrics, J. Therm. Spray Technol. 17, 583–588 (2008) [CrossRef] [Google Scholar]
  29. J. Voyer, P. Schulz, M. Schreiber, Electrically conductive flame sprayed aluminum coatings on textile substrates, in International Thermal Spray Conference 2008 (Maastricht, Limburg) (2008) pp. 818–823 [Google Scholar]
  30. X.L. Zhou, A.F. Chen, J.C. Liu, X.K. Wu, J.S. Zhang, Preparation of metallic coatings on polymer matrix composites by cold spray, Surface Coat. Technol. 206, 132–136 (2011) [CrossRef] [Google Scholar]
  31. G. Sun, X. He, J. Jiang, Y. Sun, Y. Zhong, A study on the deposition of Al2O3 coatings on polymer substrates by a plasma spray/micro-arc oxidation two-step method, J. Therm. Spray Technol. 22, 27–35 (2013) [CrossRef] [Google Scholar]
  32. D.A. Gulino, Oxygen barrier coatings for enhanced stability of polyimide composites at elevated temperatures, NASA Cooperative Agreement NCC 3–194 report, NASACR-195904 (1994) [Google Scholar]
  33. H. Boyer, A. McDonald, P. Mertiny, Flame Spray Deposition of Electrically Conductive Traces on Polymer Substrates for System Integrated Composite Structures, Composites, Las Vegas, NV (2012) 1–6 [Google Scholar]
  34. R. Gonzalez, A. McDonald, P. Mertiny, Effect of flame-sprayed Al-12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubes, Polym. Test. 32, 1522–1528 (2013) [CrossRef] [Google Scholar]
  35. A. Ganesan, J. Affi, M. Yamada, M. Fukumoto, Cold spray of metal-polymer of cold sprayed copper coating on the PVC polymer substrate, Surf. Coat. Technol. 207, 262–269 (2012) [CrossRef] [Google Scholar]
  36. A. Ganesan, M. Yamada, M. Fukumoto, Cold spray coating deposition mechanism on the thermoplastic and thermosetting polymer substrates, J. Therm. Spray Technol. 22, 1275–1282 (2013) [CrossRef] [Google Scholar]
  37. M. Gardon, A. Latorre, M. Torrell, S. Dosta, J. Fernandez, J.M. Guilemany, Cold gas spray titanium coatings onto a biocompatible polymer, Mater. Lett. 106, 97–99 (2013) [CrossRef] [Google Scholar]
  38. G. Sun, X. He, J. Jiang, S. Yue, Parametric study of Al and Al2O3 ceramic coatings deposited by air plasma spray onto polymer substrate, Appl. Surf. Sci. 257, 7864 (2011) [CrossRef] [Google Scholar]
  39. R. Beydon, G. Bernhart, Y. Segui, Measurement of metallic coatings adhesion to fibre reinforced plastic materials, Surf. Coat. Technol. 126, 39–47 (2000) [CrossRef] [Google Scholar]
  40. A.G. Liu, M.H. Guo, M.H. Zhao, H. Ma, S.H. Hu, Arc sprayed erosion-resistant coating for carbon fiber reinforced polymer matrix composite substrates, Surf. Coat. Technol. 200, 3073–3077 (2006) [CrossRef] [Google Scholar]
  41. F. Robitaille, M. Yandouzi, S. Hind, B. Jodoin, Metallic coating of aerospace carbon/epoxy composites by the pulsed gas dynamic spraying process, Surf. Coat. Technol. 203, 2954–2960 (2009) [CrossRef] [Google Scholar]
  42. W. Huang, Y. Zhao, X. Fan, X. Meng, Y. Wang, X. Cai, X. Cao, Z. Wang, Effect of bond coats on thermal shock resistance of thermal barrier coatings deposited onto polymer matrix composites via air plasma spray process, J. Therm. Spray. Technol. 22, 918 (2013) [CrossRef] [Google Scholar]
  43. W. Huang, X. Fan, Y. Zhao, X. Zhou, X. Meng, Y. Wang, B. Zou, X. Cao, Z. Wang, Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process, Surf. Coat. Technol. 207, 421 (2012) [CrossRef] [Google Scholar]
  44. W. Huang, H. Cheng, C. Zhang, Y. Zhou, X. Cao, Thermal ablation of stabilized zirconia/metal coated polyimide matrix composites via plasma spray process, Plasma Chem. Plasma Process. 35, 587 (2015) [CrossRef] [Google Scholar]
  45. W. Huang, H. Cheng, Y. Zhou, Oxidation behavior of plasma-sprayed stabilized zirconia/Al coated polymer matrix composites, RSC Adv. 5, 72331 (2015) [CrossRef] [Google Scholar]
  46. L. Zhu, W. Huang, H. Cheng, X. Cao, Thermal shock resistance of stabilized zirconia/ metal coat on polymer matrix composites by thermal spraying process, J. Therm. Spray. Technol. 23, 1312 (2014) [CrossRef] [Google Scholar]
  47. H. Ashrafizadeh, P. Mertiny, A. McDonald, Determination of temperature distribution within polyurethane substrates during deposition of flame-sprayed aluminum-12silicon coatings using green's function modeling and experiments, Surf. Coat. Technol. 259, 625–636 (2014) [CrossRef] [Google Scholar]
  48. H. Ashrafizadeh, P. Mertiny, A. McDonald, Evaluation of the influence of flame spraying parameters on microstructure and electrical conductivity of Al-12Si coatings deposited on polyurethane substrates, in International Thermal Spray Conference 2015 (Long Beach, CA) (2015) pp. 370-376. [Google Scholar]
  49. H. Ashrafizadeh, A. McDonald, P. Mertiny, Deposition of electrically conductive coatings on castable polyurethane elastomers by the flame spraying process, J. Therm. Spray Technol., 25, 419–430 (2016) [CrossRef] [Google Scholar]
  50. H. Ashrafizadeh, P. Mertiny, A. McDonald, Analytical and numerical determination of transient temperature within a polyurethane substrate during a flame spraying process, in The Canadian Society for Mechanical Engineering International Congress, Toronto, ON (2014) pp. 1-6. [Google Scholar]
  51. V. Bortolussi, F. Borit, A. Chesnaud, M. Jeandin, M. Faessel et al., Cold spray of metal-polymer composite coatings onto carbon fiber-reinforced polymer (CFRP), in International Thermal Spray Conference 2016 (ITSC 2016), DVS, Shanghai, China, (2016) p. ffhal-01337696f [Google Scholar]
  52. R. Beydon, G. Bernhart, Y. Segui, Measurement of metallic coatings adhesion to fibre reinforced plastic materials, Surf. Coat. Technol. 126, 39–47 (2000) [CrossRef] [Google Scholar]
  53. W. Huang, Z. Wang, J. Xu, X. Fan, Y. Wang, B. Zou, X. Cao, Novel thermal protection coating based on Zr0.75Ce0.25O2/phosphate duplex system for polyimide matrix composites fabricated via a combined sol-gel/sealing treatment process, Corros. Sci. 74, 22 (2013) [CrossRef] [Google Scholar]
  54. P.C. King, A.J. Poole, S. Horne, R.de Nys, S. Gulizia, M.Z. Jahedi, Embedment of copper particles into polymers by cold spray, Surf. Coat. Technol. 216, 60–67 (2013) [CrossRef] [Google Scholar]
  55. A. Ganesan, M. Yamada, M. Fukumoto, The effect of CFRP surface treatment on the splat morphology and coating adhesion strength, in International Thermal Spray Conference 201 (Busan, Yeongnam) (2013) pp. 236-244. [Google Scholar]
  56. M. Ivosevic, R. Knight, S.R. Kalidindi, G.R. Palmese, J.K. Sutter, Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites, Surf. Coat. Technol. 2006, 5145 (2006) [Google Scholar]
  57. M. Ivosevic, R. Knight, S.R. Kalidindi, G.R. Palmese, J.K. Sutter, International thermal spray conference and exposition (ITSC2003), in ASM International, Orlando, Florida, USA (2003) p. 1667 [Google Scholar]
  58. M. Ivosevic, R. Knight, S.R. Kalidindi, G.R. Palmese, J.K. Sutter, Adhesive/cohesive properties of thermally sprayed functionally graded coatings for polymer matrix composites, Surf. Coat. Technol. 14, 45 (2005) [Google Scholar]
  59. Małachowska, A., M. Winnicki, L. Konat, T. Piwowarczyk, L. Pawłowski, A. Ambroziak, M. Stachowicz, Possibility of spraying of copper coatings on polyamide 6 with low pressure cold spray method, Surface Coat. Technol. 318, 82–89 (2017) [CrossRef] [Google Scholar]
  60. A. Lopera-Valle, A. McDonald, Use of flame-sprayed coatings as heating elements for polymer-based composite structures, in International Thermal Spray Conference 2015 (Long Beach, CA) (2015) pp. 1183–1190 [Google Scholar]
  61. D.S. Therrien, A.G. McDonald, P. Mertiny, Temperature Measurements of Polymer Composite Flat Plates Coated with Aluminum-12silicon, in International Thermal Spray Conference 2012 ( Houston, TX ) (2012) pp. 1-6. [Google Scholar]
  62. TECNARO-The Biopolymer Company. Available online: https://www.tecnaro.de/en/ (accessed on 20 June 2023) [Google Scholar]
  63. S.-N. Mazurchevici, A.-D. Mazurchevici, D. Nedelcu, Dynamical mechanical and thermal analyses of biodegradable raw materials for additive manufacturing, Materials 13, 1819, (2020) [Google Scholar]
  64. Mazurchevici, J.-G Motas, M. Diaconu, G. Lisa, N.M. Lohan,M. Glod, D. Nedelcu, Nanocomposite biopolymer arboblend V2 nature AgNPs, Polymers 13, 2932 (2021) [Google Scholar]
  65. E. Broitman, D. Nedelcu, S. Mazurchevici, H. Glenat, S. Grillo, Tribological and nanomechanical behavior of liquid wood, J. Tribol. 141, 022001 (2019) [CrossRef] [Google Scholar]
  66. D. Nedelcu, L. Santo, A.G. Santo, S. Plavanescu Mazurchevici, Mechanical behaviour evaluation of arboform material samples by bending deflection test, Mater. Plast. 52, 423–426 (2015) [Google Scholar]
  67. A. Marguta, S.-N. Mazurchevici, C. Carausu, D. Nedelcu, Biodegradable polymer properties through ceramic coatings, MATEC Web Conf. 368, 01017 (2022) [CrossRef] [EDP Sciences] [Google Scholar]
  68. Oerlikon Metco-Materials and Surface Solutions. Available online: https://www.oerlikon.com/metco/en/ (accessed on 12 June 2023) [Google Scholar]
  69. B. Istrate, J.V. Rau, C. Munteanu, I.V. Antoniac, S. Saceleanu, Properties and in vitro assessment of ZrO2-based coatings obtained by atmospheric plasma jet spraying on biodegradable Mg-Ca and Mg-Ca-Zr alloys, Ceram. Int. 46, 15897–15906 (2020) [CrossRef] [Google Scholar]
  70. T. Fatemeh, S. Alireza, M. Hossein, Synthesis of Cr2O3/TiO2 nanocomposite and its application as the blocking layer in solar cells, J. Environ. Anal. Chem. 5, 1000231 (2018) [Google Scholar]
  71. K. Bhagyashri, N. Mahesh, K.M. Garadkar, B.M. Rahul, Kiran, K.S. Kumar, D.A. Balu, T. Shivaji, Ionic liquid assisted synthesis of chromium oxide (Cr2O3) nanoparticles and their application in glucose sensing, J. Mater. Sci. Mater. Electron. 30, 13984–13993 (2019) [CrossRef] [Google Scholar]
  72. B.T. Sone, E. Manikandan, A. Gurib-Fakim, M. Maaza, Single-phase-Cr2O3 nanoparticles' green synthesis using Callistemon viminalis' red flower extract, Green Chem. Lett. Rev. 9, 85–90 (2016) [CrossRef] [Google Scholar]
  73. C. Benwood, A. Anstey, J. Andrzejewski, M. Misra, A.K. Mohanty, Improving the impact strength and heat resistance of 3d printed models: Structure, property, and processing correlationships during fused deposition modeling (FDM) of Poly(Lactic Acid), ACS Omega 3, 4400–4411 (2018) [CrossRef] [PubMed] [Google Scholar]
  74. E.d.M. Teixeira, A.d. Campos, J.M. Marconcini, T.J. Bondancia, D. Wood, A. Klamczynski, L.H.C. Mattosoa, G.M. Glenn, Starch/fiber/poly(lactic acid) foam and compressed foam composites, RSC Adv. 4, 6616–6623 (2014) [CrossRef] [Google Scholar]
  75. C.-S. Wu, Analysis of mechanical, thermal, and morphological behavior of polycaprolactone/wood flour blends, J. Appl. Polym. Sci. 94, 1000–1006 (2004) [CrossRef] [Google Scholar]
  76. M. Onkar, R. Savita, Monoclinic zirconium oxide nanostructures having tunable band gap synthesized under extremely non-equilibrium plasma conditions, Proceedings 3, 10 (2019) [Google Scholar]
  77. S. Sagadevan, P. Jiban, D. Isha, Hydrothermal synthesis of zirconium oxide nanoparticles and its characterization, J. Mater. Sci. Mater. Electron. 27, 5622–5627 (2016) [CrossRef] [Google Scholar]
  78. L. Suning, W. Qian, C. Tao, Z. Zhihua, W. Ying, F. Jiajun, Study on cerium-doped nano-TiO2 coatings for corrosion protection of 316 L stainless steel, Nanoscale Res. Lett. 7, 227 (2012) [CrossRef] [Google Scholar]
  79. L. Vorrada, J. Natnapin, C. Thirawich, B. Achanai, The photocatalytic reduction of hexavalent chromiumby controllable mesoporous anatase TiO2 nanoparticles, Adv. Mater. Sci. Eng. 2014, 348427 (2014) [Google Scholar]
  80. R.K. Tamrakar, K. Upadhyay, D.P. Bisen, Gamma ray induced thermoluminescence studies of yttrium (III) oxide nanopowders doped with gadolinium, J. Radiat. Res. Appl. Sci. 7, 526–531 (2014) [Google Scholar]
  81. A.K. Gupta, S. Mohanty, S.K. Nayak, Preparation and characterization of lignin nanofibre by electrospinnig technique, Int. J. Sci. Eng. Appl. Sci. 1, 184–190 (2015) [Google Scholar]
  82. A. Adnan, A. Shahid, S. Murtaza, M.R. Shahid, N. Shahzad, A.S. Saadat, Structural and magnetic phase transition of sol-gel-synthesized Cr2O3 and MnCr2O4 nanoparticles, J. Sol-Gel Sci. Technol. 80, 96–102 (2016) [CrossRef] [Google Scholar]
  83. Y.H. Cai, Y.C. Xie, Y. Tang, L.S. Zhao, Thermal decomposition kinetics of Poly(L-lactic acid) after heat treatment, Open Mater. Sci. J. 9, 28–32 (2015) [CrossRef] [Google Scholar]
  84. J.P. Mofokeng, A.S. Luyt, T. Tabi, J. Kovacs, Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices, J. Thermoplast. Compos. Mater. 25, 927–948 (2011) [Google Scholar]
  85. B. Prieur, M. Meub, M. Wittemann, R. Klein, S. Bellayer, G. Fontaine, S. Bourbigot, Phosphorylation of lignin: Characterization and investigation of the thermal decomposition, RSC Adv. 7, 16866–16877 (2017) [CrossRef] [Google Scholar]
  86. Y.C. Chien, C. Liang, S.H. Liu, S.H. Yang, Combustion kinetics and emission characteristics of polycyclic aromatic hydrocarbons from polylactic acid combustion, J. Air Waste Manag. Assoc. 60, 849–855 (2012) [Google Scholar]
  87. J. Sameni, S. Krigstin, D.d.S. Rosa, A. Leao, M. Sain, Thermal characteristics of lignin residue from industrial processes, BioResources 9, 725–737 (2014) [Google Scholar]
  88. S.-N. Mazurchevici, A.-D. Mazurchevici, D. Nedelcu, Dynamical mechanical and thermal analyses of biodegradable raw materials for additive manufacturing, Materials 13, 1819 (2020) [CrossRef] [Google Scholar]
  89. C.S. Ferreira, P.L. Santos, J.A. Bonacin, R.R. Passos, L. Aparecido Pocrifka, Rice husk reuse in the preparation of SnO2/SiO2 nanocomposite, Mater. Res. 18, 639–643 (2015) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.