Open Access
| Issue |
Mechanics & Industry
Volume 25, 2024
|
|
|---|---|---|
| Article Number | 33 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/meca/2024032 | |
| Published online | 16 December 2024 | |
- B. Anderssen, N. Fowkes, R. Hickson, M. McGuinness, Analysis of coil slumping, in Proceedings of the 2009 Mathematics and Statistics in Industry Study Group, Wollongong, Australia (2009), p. 90–108 [Google Scholar]
- R.B. Sims, J.A. Place, The stresses in the reels of cold reduction mills, Br. J. Appl. Phys. 4, 213 (1953) [CrossRef] [Google Scholar]
- J. Case, A.H. Chilver, Strength of Materials and Structures: An Introduction to the Mechanics of Solids and Structures, 2nd edn. (Elsevier, Amsterdam, 2013) [Google Scholar]
- I. Doghri, D. Chandrasekharaiah, Mechanics of deformable solids: linear and nonlinear, analytical and computational aspects, Appl. Mech. Rev. 54, B105 (2001) [CrossRef] [Google Scholar]
- S. Yanagi, S. Hattori, Y. Maeda, Analysis model for deformation of coil of thin strip under coiling process-flatness change of thin strip during coiling process I, J. Jpn. Soc. Technol. Plast. 39, 51 (1998) [Google Scholar]
- W.W. Park, D.K. Kim, Y.T. Im, H.C. Kwon, M.S. Chun, Effects of processing parameters on elastic deformation of the coil during the thin-strip coiling process, Met. Mater. Int. 20, 719 (2014) [CrossRef] [Google Scholar]
- Y.Q. Wang, L.I. Li, X.C. Yan, Y.X. Luo, L. Wu, Modeling of stress distribution during strip coiling process, J. Iron Steel Res. Int. 19, 6 (2012) [CrossRef] [Google Scholar]
- A.C. Ugural, S.K. Fenster, Advanced Strength and Applied Elasticity, 4th ed. (Prentice-Hall Inc, New Jersey, 2003) [Google Scholar]
- T.J. Chung, Applied Continuum Mechanics (Cambridge University Press, Cambridge, 1996) [Google Scholar]
- T. Sato, Four Concentric Cylinders with Prescribed Axial Strain (Thiokol Corporation, Utah, 1974) [Google Scholar]
- Y.H. Park, K.T. Park, S.Y. Won, W.K. Hong, H.C. Park, Stress analysis model of strip winding system with a sleeve for a coil of thin stainless steel, J. Iron Steel Res. Int. 24, 1 (2017) [CrossRef] [Google Scholar]
- K.T. Park, Y.H. Park, H.C. Park, S.Y. Won, W.K. Hong, Stress analysis of cold rolled strip coiling process, Trans. Korean Soc. Mech. Eng. 41, 409 (2017) [Google Scholar]
- K.T. Park, H.C. Park, Effects of design parameters and tension on behavior of a coil using finite element analysis, J. Iron Steel Res. Int. 25, 883 (2018) [CrossRef] [Google Scholar]
- Y.H. Park, K.T. Park, C.W. Lee, W. Shi, Improvement of the coiling stress calculation model for a mandrel-sleeve-coil, Adv. Mech. Eng. 14, 1 (2022) [Google Scholar]
- D. Hibbit, B. Karlsson, P. Sorensen, Getting Started with ABAQUS-Version (6.5)-Plasticity in Ductile Metals (Inc. Hibbit, Karlsson and Sorensen, Pawtucket, 2005) [Google Scholar]
- A.H. Slocum, Precision machine design: macromachine design philosophy and its applicability to the design of micromachines, in Proceedings of IEEE Micro Electro Mechanical Systems, in Travemunde, Germany (1992), p. 37–42 [Google Scholar]
- J.W. Eaton, D. Bateman, S. Hauberg, Gnu Octave (Network theory Ltd., Godalming, 1997) [Google Scholar]
- A. Quarteroni, F. Saleri, P. Gervasio, Scientific Computing with MATLAB and Octave Volume (Springer, Berlin, 2006) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.