EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 27 (2026) Mechanics & Industry, 27 (2026) 21 References
Issue
Mechanics & Industry
Volume 27, 2026
Recent advances in vibrations, noise, and their use for machine monitoring
Article Number 21
Number of page(s) 20
DOI https://doi.org/10.1051/meca/2026017
Published online 30 April 2026
  1. A.R. Khalil Hazawi, R.K. Abdel-Magied, M.N. Elsheikh, An experimental analysis of a flaring process for tube ends using a novel spinning tool, Int. J. Adv. Manufactur. Technol. 92, 157–165 (2017) [Google Scholar]
  2. C. Bell, J. Corney, N. Zuelli, D. Savings, A state of the art review of hydroforming technology: Its applications, research areas, history, and future in manufacturing, Int. J. Mater. Form. 13, 789–828 (2020) [Google Scholar]
  3. K. Martinsen, S.J. Hu, B.E. Carlson, Joining of dissimilar materials, CIRP Annals 64, 679–699 (2015) [Google Scholar]
  4. D.Y. Yang, M. Bambach, J. Cao, J.R. Duflou, P. Groche, T. Kuboki, A. Sterzing, A.E. Tekkaya, C. W. Lee, Flexibility in metal forming, CIRP Ann. 67, 743–765 (2018) [Google Scholar]
  5. M. Merklein, J.M. Allwood, B.A. Behrens, A. Brosius, H. Hagenah, K. Kuzman, K. Mori, A.E. Tekkaya, A. Weckenmann, Bulk forming of sheet metal, CIRP Ann. 61, 725–745 (2012) [Google Scholar]
  6. P. Rosa, J. Rodrigues, P. Martins, External inversion of thin-walled tubes using a die: experimental and theoretical investigation, Int. J. Machine Tools Manufact. 43, 787–796 (2003) [Google Scholar]
  7. L. Venugopal, M. Davidson, Analysis of tube end forming process using Taguchi design of experiments, Usak Univ. J. Mater. Sci. 1, 137–145 (2012) [Google Scholar]
  8. L. Venugopal, S. Kosaraju, Investigation on tube end forming behaviour of AA6061 alloy, Adv. Mater. Process. Technolog. 8, 1217–1226 (2022) [Google Scholar]
  9. G.G. Miller, Tube forming processes: a comprehensive guide, Soc. Manufactur. Eng. (2003) [Google Scholar]
  10. B. Almeida, M.L. Alves, P.A.R. Rosa, A.G. Brito, P.A.F. Martins, Expansion and reduction of thin-walled tubes using a die: experimental and theoretical investigation, Int. J. Machine Tools Manufact. 46, 1643–1652 (2006) [Google Scholar]
  11. P.A. Rosa, J.M. Rodrigues, P.A. Martins, Internal inversion of thin-walled tubes using a die: experimental and theoretical investigation, Int. J. Machine Tools Manufact. 44, 775–784 (2004) [Google Scholar]
  12. T. Wen, C. Yang, S. Zhang, L. Liu, Characterization of deformation behavior of thin-walled tubes during incremental forming: a study with selected examples, Int. J. Adv. Manufactur. Technol. 78, 1769–1780 (2015) [Google Scholar]
  13. K. Manabe, H. Nishimura, Forming loads in tube-flaring with conical punch-study on nosing and flaring of tubes V, J. Jpn. Soc. Technol. Plast. 24, 47–52 (1983) [Google Scholar]
  14. K. Kitazawa, Improvement in flaring limit of thin-walled circular tubes using precurling method, JSME Part C 62, 773–778 (1996) [Google Scholar]
  15. Y.H. Lu, Study of tube flaring ratio and strain rate in the tube flaring process, Finite Elements Anal. Des. 40, 305–318 (2004) [Google Scholar]
  16. J.P. Pragana, I.M. Bragança, C.M. Silva, P.A. Martins, Integration of tube end forming in wire arc additive manufacturing: an experimental and numerical investigation, Int. J. Adv. Manufactur. Technol. 117, 2715–2726 (2021) [Google Scholar]
  17. S. Baek, X.G. Song, Y.C. Park, T.G. Kim, K.Y. Park, K.S Kim, Study on the flange manufacturing of tube with high pressures, ASME Int. Mech. Eng. Congr. Exposit., American Society of Mechanical Engineers (2012) [Google Scholar]
  18. P. Lin, Y. Guan, P. Kong, S. Jiang, D. Sun, S. Guo, B. Yan, H. Feng, L. Yang, Y. Zhang, Transfer mechanisms of folding defect for thin-walled tube end flanges formed by flaring-upsetting hybrid process, J. Manufactur. Process. 125, 321–336 (2024) [Google Scholar]
  19. S. Kajikawa, K. Uchida, T. Kuboki, Rotary tube flaring using a conical punch with grooves for high forming limit and productivity, CIRP Ann. 74, 387–391 (2025) [Google Scholar]
  20. S. Zhang, T. Kuboki, M. Akiyama, S. Kajikawa, Influence of mechanical properties of tube on forming limits and deformation characteristics in an expansion drawing process, J. Manufactur. Sci. Eng. 146, 071005 (2024) [Google Scholar]
  21. V. Cristino, J.P. Magrinho, G. Centeno, M.B. Silva, P.A.F. Martins, Theory of single point incremental forming of tubes, J. Mater. Process. Technol. 287, 116659 (2021) [Google Scholar]
  22. T. Altan, S.-I. Oh, H.L. Gegel, Metal forming: fundamentals and applications (1983) [Google Scholar]
  23. P.D.T. Caiza, S. Sire, T. Ummenhofer, Y. Uematsu, Full and partial compression fatigue tests on welded specimens of steel St 52-3. Effects of the stress ratio on the probabilistic fatigue life estimation, Appl. Eng. Sci. 10, 100091 (2022) [Google Scholar]
  24. Y.-H. Lu, A study of the finite element stabilized matrix to the hemispherical cup-drawing process, Comput. Struct. 60, 235–242 (1996) [Google Scholar]
  25. F. Elerian, W.M. Helal, M. Aboueleaz, Methods of roundness measurement: An experimental comparative study, J. Mech. Eng. Res. Dev. 44, 173–183 (2021) [Google Scholar]
  26. O. Zakharov, I. Bobrovskij, A. Kochetkov, Analysis of methods for estimation of machine workpiece roundness, Proc. Eng. 150, 963–968 (2016) [Google Scholar]
  27. A. Makinouchi, H. Ogawa, Y. Tozawa, Simulation of sheet bending processes by elastic-plastic finite element method, CIRP Ann. 38, 279–282 (1989) [Google Scholar]
  28. X. Wu, Deformation and evolution of life in crystalline materials (2019) [Google Scholar]
  29. P. Benardos, G.-C. Vosniakos, Predicting surface roughness in machining: a review, Int. J. Mach. Tools Manufact. 43, 833–844 (2003) [Google Scholar]
  30. F.J. Pontes, J.R. Ferreira, M.B Silva, A.P Paiva, P.P Balestrassi, Artificial neural networks for machining processes surface roughness modeling, Int. J. Adv. Manufactur. Technol. 49, 879–902 (2010) [Google Scholar]
  31. J. Dobes, J.E.S. Leal, J. Profeta, M.M. Sousa, F.P.L. Neto, A.P. Filho, R.V. Arencibia, Effect of mechanical vibration on Ra, Rq, Rz, and Rt roughness parameters, Int. J. Adv. Manufactur. Technol. 92, 393–406 (2017) [Google Scholar]
  32. S. Bose, S.F. Robertson, A. Bandyopadhyay, Surface modification of biomaterials and biomedical devices using additive manufacturing, Acta Biomater. 66, 6–22 (2018) [Google Scholar]
  33. M. Wieland, P. Hänggi, W. Hotz, M. Textor, B.A. Keller, N.D Spencer, Wavelength-dependent measurement and evaluation of surface topographies: application of a new concept of window roughness and surface transfer function, Wear 237, 231–252 (2000) [Google Scholar]
  34. S. Siraj, H. Dharmadhikari, N. Gore, Modeling of roughness value from tribological parameters in hard turning of AISI 52100 steel, Proc. Manufactur. 20, 344–349 (2018) [Google Scholar]
  35. E. Gadelmawla, Simple and efficient algorithms for roundness evaluation from the coordinate measurement data, Measurement 43, 223–235 (2010) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.