The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
This article has been cited by the following article(s):
Predictive modeling and multi-response optimization of cutting parameters using DF, GRA and MABAC techniques while turning POM-C GF 25% composite polymer
Nahla Djouambi, Mohamed Athmane Yallese, Mounia Kaddeche, Salim Belhadi and György Hegedűs The International Journal of Advanced Manufacturing Technology 130(3-4) 1987 (2024) https://doi.org/10.1007/s00170-023-12703-4
Analyzing the Impacts of Cutting Parameters on Cutting Forces in the Taguchi Method for Boring High-Alloy White Cast Irons with CBN Inserts
Coated CBN cutting tool performance in green turning of gray cast iron EN-GJL-250: modeling and optimization
Salim Chihaoui, Mohamed Athmane Yallese, Salim Belhadi, et al. The International Journal of Advanced Manufacturing Technology (2021) https://doi.org/10.1007/s00170-021-06820-1
Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition
Lalatendu Dash, Smita Padhan, Anshuman Das and Sudhansu Ranjan Das Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(22) 6496 (2021) https://doi.org/10.1177/0954406221993844
Modeling and Optimization of Power Consumption for Economic Analysis, Energy-Saving Carbon Footprint Analysis, and Sustainability Assessment in Finish Hard Turning Under Graphene Nanoparticle–Assisted Minimum Quantity Lubrication
Smita Padhan, Lalatendu Dash, Santosh Kumar Behera and Sudhansu Ranjan Das Process Integration and Optimization for Sustainability 4(4) 445 (2020) https://doi.org/10.1007/s41660-020-00132-9
Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication
Lalatendu Dash, Smita Padhan and Sudhansu Ranjan Das Journal of the Brazilian Society of Mechanical Sciences and Engineering 42(10) (2020) https://doi.org/10.1007/s40430-020-02594-x
Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear
H. Aouici, M. Elbah, M. A. Yallese, et al. The International Journal of Advanced Manufacturing Technology 87(5-8) 2221 (2016) https://doi.org/10.1007/s00170-016-8567-7