Open Access
Issue
Mechanics & Industry
Volume 16, Number 6, 2015
Article Number 609
Number of page(s) 12
DOI https://doi.org/10.1051/meca/2015036
Published online 04 September 2015
  1. K. Bouacha, M.A. Yallese, T. Mabrouki, J-F. Rigal, Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. Int. J. Refract. Metals Hard Mater. 28 (2010) 349–361 [CrossRef] [Google Scholar]
  2. I. Asiltürk, S. Neseli, Multi response optimization of CNC turning parameters via Taguchi method-based response surface analysis, Measurement 45 (2012) 785–794 [CrossRef] [Google Scholar]
  3. Z. Hessainia, A. Belbah, M.A. Yallese, T. Mabrouki, J-F. Rigal, On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations, Measurement 6 (2013) 1671–1678 [CrossRef] [Google Scholar]
  4. B. Fnides, M.A. Yallese, T. Mabrouki, J-F. Rigal, Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel, Sadhana 36 (2011) 109–123 [CrossRef] [Google Scholar]
  5. R.C. Dewes, D.K. Aspinwall, A review of ultra high speed milling of hardened steels, J. Mater. Process. Technol. 69 (1997) 1–17 [CrossRef] [Google Scholar]
  6. B. Fnides, S. Boutabba, M. Fnides, H. Aouici, M.A. Yallese, Cutting tools flank wear and productivity investigation in straight turning of X38CrMoV5-1 (50 HRC), J. Appl. Eng. Technol. 3 (2013) 1–10 [CrossRef] [Google Scholar]
  7. H. Aouici, M.A. Yallese, K. Chaoui, T. Mabrouki, J.-F. Rigal, Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization, Measurement 45 (2012) 344–353 [CrossRef] [Google Scholar]
  8. H. Öktem, T. Erzurumluand H. Kurtaran, Application of response surface methodology in the optimization of cutting conditions for surface roughness, J. Mater. Process. Technol. 170 (2005) 11–16 [CrossRef] [Google Scholar]
  9. J.S. Dureja, V.K. Gupta, M. Dogra, Design optimization of cutting conditions and analysis of their effect on tool wear and surface roughness during hard turning of AISI-H11 steel with a coated mixed ceramic tool, J. Eng. Manuf. 223 (2009) 1441–1453 [CrossRef] [Google Scholar]
  10. S. Neseli, S. Yaldiz, E. Turkes, Optimization of tool geometry parameters for turning operations based on the response surface methodology, Measurement 44 (2011) 580–587 [CrossRef] [Google Scholar]
  11. H. Aouici, M.A. Yallese, B. Fnides, K. Chaoui, T. Mabrouki, Modeling, optimization of hard turning of X38CrMoV5-1 steel with CBN tool, J. Mech. Sci. Technol. 25 (2011) 2843–2851 [CrossRef] [Google Scholar]
  12. M. Elbah, M.A. Yallese, H. Aouici, T. Mabrouki, J.-F. Rigal, Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel, Measurement 46 (2013) 3041–3056 [CrossRef] [Google Scholar]
  13. D.I. Lalwani, N.K. Mehta, P.K. Jain, Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel, J. Mater. Process. Technol. 206 (2008) 167–179 [CrossRef] [Google Scholar]
  14. J.G. Lima, R.F. Avila, A.M. Abrao, M. Faustino, J.P. Davim. Hard turning AISI 4340 high strength low alloy steel and AISI D2 cold work steel, J. Mater. Process. Technol. 169 (2005) 388–395 [CrossRef] [Google Scholar]
  15. C. Fetecau, F. Stan, Study of cutting force and surface roughness in the turning of polytetrafluoroethylene composites with a polycrystalline diamond tool, Measurement 45 (2012) 1367–1379 [CrossRef] [Google Scholar]
  16. K. Bouacha, M.A. Yallese, T. Mabrouki, J.F. Rigal, Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool, Int. J. Refract. Metals Hard Mater. 28 (2010) 349–361 [CrossRef] [Google Scholar]
  17. R. Suresh, S. Basavarajappa, G.L. Samuel, Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool, Measurement 45 (2012) 1367–1379 [CrossRef] [Google Scholar]
  18. M.W. Azizi, S. Belhadi, M.A. Yallese, T. Mabrouki, J.-F. Rigal, Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel, J. Mech. Sci. Technol. 26 (2012) 4105–4114 [CrossRef] [Google Scholar]
  19. H. Aouici, M.A. Yallese, A. Belbah, M.F. Ameur, M. Elbah, Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool, Sadhana 38 (2013) 429–445 [CrossRef] [Google Scholar]
  20. A. Kumar Sahoo, B. Sahoo, Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts, Measurement 45 (2012) 2153–2165 [CrossRef] [Google Scholar]
  21. M.H. Cetin, B. Ozcelik, E. Kuram, E. Demirban, Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method, J. Clean. Prod. 19 (2011) 2049–2056 [CrossRef] [Google Scholar]
  22. S.R. Das, D. Dhupal, A. Kumar, Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool, Measurement, 62 (2015) 108–126 [CrossRef] [Google Scholar]
  23. V.N. Gaitonde, S.R. Karnik, L. Figueira, J.P. Davim, Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts, Int. J. Refract. Metals. Hard Mater. 27 (2009) 754–763 [CrossRef] [Google Scholar]
  24. B. Fnides, Comportement des outils de coupe en tournage dur à sec - Modélisation des paramètres technologiques, Presses Académiques Francophones, 2014, ISBN: 978-3-8381-7843-1 [Google Scholar]
  25. J.S. Kwak, Application of Taguchi and response surface methodologies for geometric error in surface grinding process, Int. J. Mach. Tools Manuf. 45 (2005) 327–334 [CrossRef] [Google Scholar]
  26. C.E. Walker, A.M. Parkhurst, Response surface analysis of bake-lab data with a personal computer, Cereal Foods World 29 (1984) 662 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.