Issue |
Mécanique & Industries
Volume 12, Number 2, 2011
|
|
---|---|---|
Page(s) | 139 - 146 | |
DOI | https://doi.org/10.1051/meca/2011010 | |
Published online | 22 April 2011 |
Tolérancement fonctionnel optimisé par la méthode des dispersions
Functional tolerancing optimised by dispersions method
1 LAT, Département de Mécanique, Faculté de Technologie, Université Abou Bekr Belkaid, BP 230, Tlemcen 13000, Algérie
2 Institut des Sciences du Mouvement/GIBO CNRS UMR 6233, Département de Génie mécanique et Productique, IUT d’Aix-en-Provence, Avenue Gaston Berger, 13625 Aix-en-Provence Cedex 1, France
a Auteur pour correspondance : nmcheikh@yahoo.fr, acheikh@mail.univ.tlemcen.dz
Reçu : 30 Décembre 2009
Accepté : 5 Novembre 2010
Cet article présente l’optimisation du tolérancement fonctionnel par la méthode des dispersions, celle-ci a fait ces preuves dans l’optimisation des cotes de fabrication. Dans ce travail la méthode des dispersions inconnues est combinée avec la méthode du transfert minimum pour la modélisation de l’automatisation de la simulation des exigences fonctionnelles d’un assemblage mécanique. La simulation consiste en l’extraction automatique des chaînes fonctionnelles d’une part, et en l’optimisation des dispersions d’autre part. Enfin, les cotes fonctionnelles sont synthétisées à partir des dispersions optimisées en terme de cotes moyennes et intervalles de tolérances centrés. Elles sont en adéquation avec l’écriture au sens de la norme ISO des cotes fonctionnelles.
Abstract
This paper presents the optimization of functional tolerancing by dispersions method, this later has made this evidence in manufacturing dimensions optimization. In this work the dispersions method on the basis of unknown variables is combined with the minimal transfer method for automatically the modelling of the functional requirements of a mechanical assembly. The simulation is constructed around two procedures. The first procedure executes the extraction of the functional requirements, the second procedure results in the optimization of the dispersions. The functional dimensions are synthesized by uses of the optimised values of the dispersions to compute the mean values and tolerances of the functional dimensions in the chains. They are in adequacy with the writing within the meaning of the ISO standard of the functional dimensions.
Mots clés : Méthode des dispersions / optimisation / chaîne de cotes / tolérances fonctionnelles / synthèse / ISO
Key words: Dispersions method / optimization / dimension chains / functional tolerances / synthesis / ISO
© AFM, EDP Sciences 2011
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.