Open Access
| Issue |
Mechanics & Industry
Volume 13, Number 6, 2012
Giens 2011
|
|
|---|---|---|
| Page(s) | 405 - 414 | |
| DOI | https://doi.org/10.1051/meca/2012033 | |
| Published online | 09 January 2013 | |
- M.E. Merchant, Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip, J. Appl. Phys. (USA), Amer. Inst. Phys. New York 16 (1945) 267–275 [Google Scholar]
- M.E. Merchant, Mechanics of the metal cutting process. II. Plasticity conditions in orthogonal cutting, J. Appl. Phys. (USA), Amer. Inst. Phys. New York 16 (1945) 318–324 [Google Scholar]
- E.H. Lee, B. Shaffer, The theory of plasticity applied to problems of machining, J. Appl. Mech. Amer. Soc. Mech. Eng., New York 18 (1951) 405–413 [Google Scholar]
- P. Gilormini, E. Felder, Modélisation thermomécanique de la formation du copeau en usinage à grande vitesse, Bulletin du Cercle des Métaux, Tome 15, 1985 [Google Scholar]
- P.L.B. Oxley, Mechanics of machining an analytical approach to assessing machinability, Ellis Horwood limited, Chichester, 1989 [Google Scholar]
- A. Moufki, A. Devillez, D. Dudzinski, A. Molinari, Thermodynamical modeling of cutting and experimental validation, Metal Cutting and High Speed Machining (2002) 51–67 [Google Scholar]
- A. Molinari, R. Cheriguene, H. Miguelez, Numerical and analytical modeling of orthogonal cutting : The link between local variables and global contact characteristics, Int. J. Mech. Sci. 53 (2011) 183–206 [CrossRef] [Google Scholar]
- F. Salvatore, T. Mabrouki, H. Hamdi, Numerical simulation and analytical modelling of ploughing and elastic phenomena during machining processes, Int. J. Surf. Sci. Eng. 6-3 (2011) 185–200 [Google Scholar]
- F. Zemzemi, Caracterisation de modèles de frottement aux interfaces pièce-outils-copeau en usinage : application au cas de l’usinage des aciers et de l’inconel 718, Thèse, École centrale de Lyon, 2007 [Google Scholar]
- G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, strain rates and high temperature, 7th Int. Symp. Ballistics (1983) 541–547 [Google Scholar]
- A. Moufki, A. Molinari, A new thermomecanical model of cutting applied to turning operations. Part I. Theory, International J. Machine Tools Manuf. 45 (2005) 166–180 [CrossRef] [Google Scholar]
- A. Moufki, A. Molinari, A new thermomecanical model of cutting applied to turning operations. Part II. Parametrical Study, Int. J. Machine Tools Manuf. 45 (2005) 181–193 [CrossRef] [Google Scholar]
- M. Barge, H. Hamdi, J. Rech, J.M. Bergheau, Numerical modelling of orthogonal cutting : influence of numerical parameters, J. Mater. Proc. Technol. 164-165 (2005) 1148–1153 [CrossRef] [Google Scholar]
- A. Molinari, D. Dudzinski, Stationnary shear band in high speed machining, C.R. Acad. Sci. Paris 315/2 (1992) 399–405 [Google Scholar]
- T. Mabrouki, J.F. Rigal, A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning, J. Mater. Proc. Technol. 176 (2006) 214–221 [CrossRef] [Google Scholar]
- G.R. Johnson, W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech. 21 (1985) 31–48 [Google Scholar]
- F. Salvatore, Contribution à la modélisation analytique et numérique de l’enlèvement de matière et de ses conséquences induites : cas de la coupe orthogonale, Thèse, École Nationale Supérieure des Mines de Saint-Étienne, 2011 [Google Scholar]
- F. Salvatore, T. Mabrouki, H. Hamdi, Numerical and experimental study of residual stresses induced by machining processes, Int. J. Surf. Sci. Eng. 6-1/2 (2012) 136–147 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.