Open Access
Mechanics & Industry
Volume 17, Number 1, 2016
Article Number 110
Number of page(s) 7
Published online 13 November 2015
  1. T.C. Chang, J.Y. Wang, C. Ming, S. Lee, Grain refining of magnesium alloy AZ31 by rolling, J. Mater. Process. Technol. 140 (2003) 588–591 [CrossRef] [Google Scholar]
  2. H.K. Kim, The grain size dependence of flow stress in an ECAPed AZ31 Mg alloy with a constant texture, J. Mater. Sci. Eng. A 515 (2009) 66–70 [CrossRef] [Google Scholar]
  3. G.B. Hamu, D. Eliezer, L. Wagner, The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy, J. Alloys Compd. 468 (2009) 222–229 [CrossRef] [Google Scholar]
  4. R. Jahedi, M. Sedighi, H. Jahed, ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy, J. Mater. Sci. Eng. A 593 (2014) 178–184 [CrossRef] [Google Scholar]
  5. R.N. Chari, A. Kami, B.M. Dariani, Modeling and optimization of equivalent plastic strain in equal-channel angular rolling using response surface methodology, J. Eng. Manuf. (2014) DOI: 10.1177/0954405414542855 [Google Scholar]
  6. Y.H. Chung, J.W. Park, K.H. Lee, An analysis of accumulated deformation in the equal channel angular rolling(ECAR) process, J. Metals Mater. Int. 12 (2006) 289–292 [CrossRef] [Google Scholar]
  7. M. Kvaèkaj, T. Kvaèkaj, A. Kováèová, R. Koèiško, J. Bacsó, Finite element analysis of deformation behavior in equal channel angular rolling process, Acta Metallurgica Slovaca 16 (2010) 84–90 [Google Scholar]
  8. J.C. Tan, M.J. Tan, Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet, J. Mater. Sci. Eng. A 339 (2003) 124–132 [CrossRef] [Google Scholar]
  9. S.M. Fatemi-Varzaneh, A. Zarei-Hanzaki, H. Beladi, Dynamic recrystallization in AZ31 magnesium alloy, J. Mater. Sci. Eng. A 456 (2007) 52–57 [CrossRef] [Google Scholar]
  10. H.K. Kim, W.J. Kim, Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation, J. Mater. Sci. Eng. A 385 (2004) 300–308 [CrossRef] [Google Scholar]
  11. K. Xia, J.T. Wang, X. Wu, G. Chen, M. Gurvan, Equal channel angular pressing of magnesium AZ31 alloy, J. Mater. Sci. Eng. A 410 (2005) 324–327 [CrossRef] [Google Scholar]
  12. H.Q. Sun, Y.N. Shi, M.X. Zhang, K. Lu, Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy, Acta Mater. 55 (2007) 975–982 [CrossRef] [Google Scholar]
  13. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd edition, Elsevier, 2004 [Google Scholar]
  14. M. Aibin, J. Jiang, N. Saito, I. Shigematso, Y. Yuan, D. Yang, Y. Nishida, Improving both strength and ductility of a Mg alloy through a large number of ECAP passes, J. Mater. Sci. Eng. A 513 (2009) 122–127 [Google Scholar]
  15. C. Chang, X.H. Du, J.C. Huang, Producing Nano grained microstructure in Mg-Al-Zn alloy by two-step friction stir processing, Scri. Mater. 59 (2008) 356–359 [CrossRef] [Google Scholar]
  16. H. Watanabe, M. Toshiji, I. Koichi, Effect of temperature of differential speed rolling on room temperature mechanical properties and texture in an AZ31 magnesium alloy, J. Mater. Process. Technol. 182 (2007) 644–647 [CrossRef] [Google Scholar]
  17. C.X. Huang, G. Yang, Y.L. Gao, S.D. Wu, Z.F. Zhang, Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP, J. Mater. Sci. Eng. A 485 (2008) 643–650 [CrossRef] [Google Scholar]
  18. J.C. Lee, H.K. Seok, J.Y. Suh, Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing, Acta Materialia 50 (2002) 4005–4019 [CrossRef] [Google Scholar]
  19. B.V. Patil, U. Chakkingal, P.T. S Kumar, Influence of friction in equal channel angular pressing – A study with simulation, In international Conference on Metallurgy and Materials, 2008, pp. 1–9 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.