Open Access
Issue
Mechanics & Industry
Volume 17, Number 5, 2016
Article Number 513
Number of page(s) 9
DOI https://doi.org/10.1051/meca/2015110
Published online 07 July 2016
  1. H. Hocheng, C.C. Tsao, The path towards delamination-free drilling of composite materials, J. Mater. Process. Technol. 167 (2005) 251–264 [CrossRef] [Google Scholar]
  2. C.C. Tsao, H. Hocheng, Y.C. Chen, Delamination reduction in drilling composite materials by active backup force, CIRP Annals – Manufacturing Technology 61 (2012) 91–94 [CrossRef] [Google Scholar]
  3. P. Rahme, Y. Landon, P. Lagarrigue, R. Piquet, F Lachaud, Drilling of thick composite structures with pilot hole using a twist drill, Proceedings of 16th European Conference on Composite Materials (ECCM16), Seville, Spain, 2014 [Google Scholar]
  4. R. Piquet, B. Ferret, F. Lachaud, P. Swider, Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills, Compos. Part A 31 (2000) 1107–1115 [CrossRef] [Google Scholar]
  5. P. Rahme, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, Study into causes of damage to carbon epoxy composite material during the drilling process, Int. J. Mach. Machinab. Mater. 3 (2008) 309–325 [Google Scholar]
  6. M.S. Won, C.K.H. Dharan, Chisel edge and pilot hole effects in drilling composite laminates, J. Manufact. Sci. Eng. 124 (2002) 242–247 [CrossRef] [Google Scholar]
  7. C.C. Tsao, W.C. Chen, Prediction of the location of delamination in the drilling of composite laminates, Int. J. Mater. Process. Technol. 70 (1997) 185–189 [CrossRef] [Google Scholar]
  8. P. Rahme, Y. Landon, P. Lagarrigue, R. Piquet, F Lachaud, B. Marguet, J. Bourriquet, C. Le Roy, Chisel edge effect on delamination when drilling thick composite materials with a twist drill, SAE Int. J. Aerospace 1 (2009) 776–781 [CrossRef] [Google Scholar]
  9. P. Rahme, Y. Landon, P. Lagarrigue, F. Lachaud, R. Piquet, Drilling thick composite materials using large diameter drills, Int. J. Machin. Machinab. Mater. 10 (2011) 202–221 [CrossRef] [Google Scholar]
  10. H. Hocheng, C.K.H. Dharan, Delamination during drilling in composite laminates, ASME J. Eng. Ind. 112 (1990) 236–239 [CrossRef] [Google Scholar]
  11. F. Veniali, A. Di Ilio, V. Tagliaferri, An experimental study of the drilling of aramid composites, J. Energy Resour. Technol 117 (1995) 271–278 [CrossRef] [Google Scholar]
  12. W. Koenig, C. Wulf, P. Grass, H. Willerscheid, Machining of fiber reinforced plastics, Ann. CIRP 34 (1984) 537–548 [CrossRef] [Google Scholar]
  13. F. Lachaud, R. Piquet, F. Collombet, L. Surcin, Drilling of composite structures, Compos. Struct. 52 (2001) 511–516 [CrossRef] [Google Scholar]
  14. P. Rahme, Y. Landon, P. Lagarrigue, R. Piquet, F Lachaud, B. Marguet, J. Bourriquet, C. Le Roy, Drilling of think composite structures – State of the art, SAE International Conference, Toulouse, France, 2006 [Google Scholar]
  15. P. Rahme, Y. Landon, R. Piquet, F Lachaud, P. Lagarrigue, Analytical model for pre-drilled thick composite plates, Joint Conference on Mechanical, Design Eng. Adv. Manuf. - JCM14, Toulouse, France, 2014 [Google Scholar]
  16. S. Jain, D.C.H. Yang, Delamination-Free drilling of composite laminates, ASME Mater. Div. Publ., MD, Anaheim, CA, USA, 1992, pp. 45–59 [Google Scholar]
  17. S. Jain, D.C.H. Yang, Effects of feed rate and chisel edge on delamination in composites drilling, J. Eng. Ind. 115 (1993) 398–405 [CrossRef] [Google Scholar]
  18. C.C. Tsao, H. Hocheng, The effect of chisel length and associated pilot hole on delamination when drilling composite materials, Int. J. Mach. Tools Manuf. 43 (2003) 1087–1092 [CrossRef] [Google Scholar]
  19. S. Timoshenko, S. Woinowsky-Krieger, Theory of plates and shells, Mcgraw-Hill, 1959, ISBN 13: 9780070647794 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.