Open Access
Issue |
Mechanics & Industry
Volume 17, Number 6, 2016
|
|
---|---|---|
Article Number | 604 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/meca/2016005 | |
Published online | 07 July 2016 |
- R.K. Saxena, P.M. Dixit, Numerical analysis of damage for prediction of fracture initiation in deep drawing, Finite Elem. Anal. Design 47 (2011) 1104–1117 [CrossRef] [Google Scholar]
- W. Johnson, S.K. Ghosh, S.R. Reid, Piercing and hole-flanging of sheet metals – a survey, Mem. Sci. Rev. Metall. 77 (1980) 585–606 [Google Scholar]
- R. Hambli, P. Guérin, Application of neural networks for optimum clearance prediction in sheet-metal blanking process, Finite Elem. Anal. Design 39 (2003) 1039–1052 [CrossRef] [Google Scholar]
- R. Hambli, Design of Experiment Based Analysis for Sheet Metal Blanking Processes Optimisation, Int. J. Adv. Manuf. Technol. 19 (2002) 403–410 [CrossRef] [Google Scholar]
- S. Thipprakmas, S. Rojananan, P. Paramaputi, An investigation of step taper-shaped-punch in piercing process using finite element method, J. Mater. Process. Technol. 197 (2008) 132–139 [Google Scholar]
- S. Thipprakmas, Wiriyakorn Phanitwong, Finite element analysis of flange-forming direction in the hole flanging process, Int. J. Adv. Manuf. Technol. 61 (2012) 609–620 [Google Scholar]
- P. Sartkulvanich, B. Kroenauer, R. Golle, A. Konieczny, T. Altan, Finite element analysis of the effect of blanked edge quality upon stretch flanging of AHSS, CIRP Ann. – Manufact. Technol. 59 (2010) 279–282 [Google Scholar]
- D.K. Leu, Finite-element simulation of hole-flanging process of circular sheets of anisotropic materials, Int. J. Mech. Sci. 38 (1996) 917–933 [CrossRef] [Google Scholar]
- T.Z. Quazi, An Overview of Clearance Optimization in Sheet Metal Blanking Process, Int. J. Mod. Eng. Res. 2 (2012) 4547–4558 [Google Scholar]
- A. Kacem, A. Krichen, P.Y. Manach, S. Thuillier, J.W. Yoon, Failure prediction in the hole-flanging process of aluminium alloys, Eng. Fract. Mech. 99 (2013) 251–265 [CrossRef] [Google Scholar]
- Chandra Pal Singh, Geeta Agnihotri, Study of Deep Drawing Process Parameters: A Review, Int. J. Sci. Res. Publ. 5 (2015), ISSN 2250-3153 [Google Scholar]
- J. Cao, B.L. Kinsey, Next generation stamping dies – controllability and flexibility, Robot Comput. Integr. Manuf. 17 (2001) 49–56 [CrossRef] [Google Scholar]
- Rajiv Shivpuri, Robust design of spatially distributed friction for reduced wrinkling and thinning failure in sheet drawing, Mater. Design 30 (2009) 2043–2055 [CrossRef] [Google Scholar]
- Y.M. Huang, J.W. Cheng, Influence of lubricant on limitation of formability of cylindrical cup-drawing, J. Mater. Process. Technol. 63 (1997) 77–82 [CrossRef] [Google Scholar]
- N. Asnafi, On stretch and shrink flanging of sheet aluminum by fluid forming, J. Mater. Process. Technol. 96 (1999) 198–214 [CrossRef] [Google Scholar]
- N.M. Wang, M.L. Wenner, An analytical and experimental study of stretch flanging, Int. J. Mech. Sci. 16 (1974) 135–143 [CrossRef] [Google Scholar]
- J.-O. Sperle, K. Olsson, High strength and ultra-high strength steels for weight reduction in structural and safety related applications, SSAB Tunnplåt AB, Borlänge, Sweden [Google Scholar]
- S.M. Keralavarma, Void growth and coalescence in anisotropic plastic solids, Int. J. Solids Struct. 48 (2011) 1696–1710 [CrossRef] [Google Scholar]
- R. Narayanasamy, C. Sathiya Narayanan, Palani Padmanabhan, T. Venugopalan, Effect of mechanical and fractographic properties on hole expandability of various automobile steels during hole expansion test, Int. J. Adv. Manuf. Technol. 47 (2010) 365–380 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.