Open Access
Issue
Mechanics & Industry
Volume 17, Number 7, 2016
STANKIN: Advanced scientific studies and research in Mechanical Engineering
Article Number 709
Number of page(s) 5
DOI https://doi.org/10.1051/meca/2016073
Published online 30 December 2016
  1. S. Sankaré, Development of a rapid manufacturing process of titanium alloy mechanical parts by micro-laser cladding, monograph / S. Sankaré. — University of Strasbourg, 2007, p. 157 [Google Scholar]
  2. T. Jambor, Funktionalisierung von Bauteiloberflächen durch Mikro- Laserauftragschweißen = Functionalization of surfaces by micro laser cladding: Rheinisch-Westfälische Technische Hochschule Aachen (2012) 157 [Google Scholar]
  3. S.N. Grigoriev, T.V. Tarasova, G.O. Gvozdeva et al., Microcladding of hypereutectic Al–Si alloys: technological aspects and structure features, Int. J. Cast Metals Res. 27 (2014) 357–361 [CrossRef] [Google Scholar]
  4. F. Brückner, S. Nowotny, M. Riede, Surface Functionalization by High-precision Laser Cladding, Laser Technik Journal 10 (2013) 29–31 [Google Scholar]
  5. S.N. Grigor’ev, T.V. Tarasova, G.O. Gvozdeva, Optimization of parameters of laser surfacing of alloys of the Al-Si system, Metal Sci. Heat Treatm. 57 (2016) 589–595 [CrossRef] [Google Scholar]
  6. T.V. Tarasova, E.V. Popova, Formation of Coatings by a Method of Overlay Laser Welding of Powders of Titanium and Silicon Carbide on a Surface of Low-Carbon Steel / T.V. Tarasova, E.V. Popova, Metallofizika I Noveishie Tekhnologii 11 (2013) 1487–1500 [Google Scholar]
  7. A.G. Grigor’yants, I.N. Shiganov, A.I. Misyurov, Manufacturing methods of laser processing manual for higher education institutions, Bauman Moscow State Technical University (2006) 663 [Google Scholar]
  8. S. Nowotny, A. Richter, K. Tangermann, Surface protection of light metals by one-step laser cladding with oxide ceramics, J. Thermal Spray Technol. 8 (1999) 258–262 [CrossRef] [Google Scholar]
  9. T. Jambor, K. Wissenbach, Reparatur und Verschleißschutz von Mikrowerkzeugen durch automatisiertes Mikro-Laserstrahl-Auftragschweißen [text] // TAW-Symposium: Termisches Beschichten mit laserbasierten Fertigungsverfahren: proceedings of the conference. — Dresden, Germany, 2006, pp. 26–27 [Google Scholar]
  10. S.N. Grigoriev, T.V. Tarasova, G.O. Gvozdevaetal, Solidification behavior during laser microcladding of Al-Si alloys, Surf. Coat. Technol. 268 (2014) 303–309 [CrossRef] [Google Scholar]
  11. V.I. Popov, Mechanics of contact interaction and friction physics from nanotribology to earthquake dynamics, Phys. Mathematical Literature (2013) 352 [Google Scholar]
  12. T.V. Tarasova, A.P. Nazarov, Yu. I. Shalapko, Abrasive and fretting wear resistance of refractory Cobalt alloy specimens manufactured by the method of selective laser melting, J. Friction Wear 5 (2014) 35365–373 [Google Scholar]
  13. T.V. Tarasova, Yu. I. Shalapko, Processes of dynamics of surface layers during low-amplitude fretting, J. Friction Wear 3 (2013) 34166–174 [Google Scholar]
  14. E. Hornbogen, The role of the fracture toughness in the wear of metals, Wear 33 (1975) 251–259 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.