Open Access
Issue |
Mechanics & Industry
Volume 17, Number 7, 2016
STANKIN: Advanced scientific studies and research in Mechanical Engineering
|
|
---|---|---|
Article Number | 720 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/meca/2017009 | |
Published online | 30 December 2016 |
- K. Ait Sghir, O. Cousinard, F. Bolaers et al., Bearing monitoring in variable speed regime using normalized indicators, Mechanics & Industry 17 (2016) 305 [CrossRef] [EDP Sciences] [Google Scholar]
- L. Pang, A. Hosseini, H.M. Hussein et al., Application of a new thick zone model to the cutting mechanics during end-milling, Int. J. Mech. Sci. 96–97 (2015) 91–100 [CrossRef] [Google Scholar]
- S.N. Grigoriev, V.D. Gurin, M.A. Volosova, N.Y. Cherkasova, Development of residual cutting tool life prediction algorithm by processing on CNC machine tool, Materialwissenschaft und Werkstofftechnik 44 (2013) 790–796 [CrossRef] [Google Scholar]
- M.P. Kozochkin, M.A. Volosova, D.G. Allenov, Effect of Wear of Tool Cutting Edge on Detail Surface Layer Deformation and Parameters of Vibro-Acoustic Signals, Mater. Sci. Forum 876 (2016) 50–58 [CrossRef] [Google Scholar]
- M. Jenek, S.V. Fedorov, M.H. Swe, Synthesis of Hard-Melting Carbide, Nitrite and Intermetallic Phases with Surface Electron-Beam Microallîying, Mater. Sci. Forum 876 (2016) 25–35 [CrossRef] [Google Scholar]
- Z.G. Li., M. Mori, S. Miyake, M. Kumagai, H. Saito, Y. MuramatsuStructure and properties of Ti-Si-N films prepared by ICP assisted magnetron sputtering, Surf. Coat. Technol. 193 (2005) 345–349 [CrossRef] [Google Scholar]
- C. Delebarre, V. Wagner, J.Y. Paris et al., The wear mechanisms occurring in a labyrinth seal/abradable contact depending on the incursion depth parameter, Mechanics & Industry 17 (2016) 601 [CrossRef] [EDP Sciences] [Google Scholar]
- V.V. Kuzin, S.N. Grigoriev, M. Yu. Fedorov, Role of the thermal factor in the wear mechanism of ceramic tools, Part 2: Microlevel, J. Friction Wear 36 (2015) 40–44 [Google Scholar]
- S.N. Grigoriev, M.A. Volosova, V.D. Gurin, A.Ye. Seleznyov, Investigation of force parameters acting on a single cutting insert made of ceramics in face milling of hardened steel, Mechanics & Industry 16 (2015) 702 [CrossRef] [EDP Sciences] [Google Scholar]
- S. Kano, T. Inoue, Surface softening and hardening of WC-Co using pulsed laser irradiation, Surf. Coat. Technol. 201 (2006) 223–229 [CrossRef] [Google Scholar]
- I.N. Zavestovskaya, P.G. Eliseev, O.N. Krokhin et al., Analysis of the nonlinear absorption mechanisms in ablation of transparent materials by high-intensity and ultrashort laser pulses, Appl. Phys. A: Mat. Sci.Proc. 92 (2008) 903–906 [CrossRef] [Google Scholar]
- V.P. Veiko, A.M. Skvortsov, T. Huynh Cong, A.A. Petrov, Laser ablation of monocrystalline silicon under pulsed-frequency fiber laser, Scientific and Technical Journal of Information Technologies, Mech. Opt. 15 (2015) 426 [Google Scholar]
- A.F. Banishev, V.S. Golubev, A.Yu. Kremnev, Damage to the surface of silicon in the solid phase by the action of Nd:YAG laser pulses, Quantum Electronics 28 (1998) 917–919 [CrossRef] [Google Scholar]
- L.V. Zhigilei, Y.G. Yingling, T.E. Itina et al., Molecular dynamics simulations of matrix assisted laser desorption – connections to experiment, Int. J. Mass Spectrometry 226 (2003) 85–106 [CrossRef] [Google Scholar]
- S.V. Fedorov, M.D. Pavlov, A.A. Okunkova, Effect of structural and phase transformations in alloyed subsurface layer of hard-alloy tools on their wear resistance during cutting of high temperature alloys, J. Friction and Wear 34 (2013) 190–198 [Google Scholar]
- A.S. Metel, Y.A. Melnik, V.V. Panin, Non-self-sustained glow discharge with electrostatic confinement of electrons sustained by a fast neutral molecule beam, Plasma Phys. Rep. 37 (2011) 357–365 [CrossRef] [Google Scholar]
- V.V. Kuzin, M.A. Volosova, M.Yu. Fedorov, Wear of tools from nitride ceramics when machining nickel-based alloys, J. Friction Wear 34 (2013) 199–203 [CrossRef] [Google Scholar]
- O.V. Sobol, A.A. Andreev, S.N. Grigoriev et al., Effect of high-voltage pulses on the structure and properties of titanium nitride vacuum-arc coatings, Metal Sci. Heat Treatment 54 (2012) 195–203 [CrossRef] [Google Scholar]
- A.A. Andreev, M.A. Volosova, V.F. Gorban, et al., The Use of Pulsed Ion Stimulation to Modify the Stressed Structure State and Mechanical Properties of Vacuum-Arc TIN Coatings, Metallofizika I Noveishie Tekhnologii 35 (2013) 1151–1151 [Google Scholar]
- J.A. Grant-Jacob, S.J. Beecher, T.L. Parsonage, et al., An 115 W Yb:YAG planar waveguide laser fabricated via pulsed laser deposition, Optical Materials Express 6 (2016) 91-96 [CrossRef] [Google Scholar]
- M. Feinaeugle, D.J. Heath, B. Mills, et al., Laser-induced backward transfer of nanoimprinted polymer elements. Appl. Phys. A 122 (2016) 398 [Google Scholar]
- D.J. Heath, B. Mills, M. Feinaeugle, R.W. Eason, Rapid bespoke laser ablation of variable period grating structures using a digital micromirror device for multi-colored surface images, Appl. Opt. 54 (2015) 4984–4988 [CrossRef] [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.