Free Access
Issue
Mechanics & Industry
Volume 18, Number 1, 2017
Article Number 114
Number of page(s) 11
DOI https://doi.org/10.1051/meca/2015073
Published online 10 January 2017
  1. E. Brinksmeier, R. Janssen, Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys, CIRP Annals - Manufact. Technol. 51 (2002) 87–90 [CrossRef] [Google Scholar]
  2. J.L. Cantero, M.M. Tardio, J.A. Canteli, M. Marcos, M.H. Miguelez, Dry drilling of alloy Ti-6Al-4V, Int. J. Machine Tools Manufact. 45 (2005) 1246–1255 [CrossRef] [Google Scholar]
  3. A.I.H. Comittee, Machining, ASM Handbook, ASM International, 1992, p. 929 [Google Scholar]
  4. A.I.H. Comittee, Properties and Selection : Nonferrrous Alloys and Special-Purpose Materials, ASM Handbook, ASM International, 1992, p. 3470 [Google Scholar]
  5. D.A. Dornfeld, J.S. Kim, H. Dechow, J. Hewson, L.J. Chen, Drilling Burr Formation in Titanium Alloy, Ti-6AI-4V, CIRP Ann. – Manuf. Technol. 48 (1999) 73–76 [CrossRef] [Google Scholar]
  6. Z. Feng, M.J. Zuo, F. Chu, Application of regularization dimension to gear damage assessment, Mech. Syst. Signal Process. 24 (2010) 1081–1098 [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  7. P. Guegan, F. Lemaitre, J. Hamann, Contribution à l’usinage des matériaux composites, La Construction Navale en Composites, edited by I. Brest, Paris, France, 1992, p. 11 [Google Scholar]
  8. W. König, C. Wulf, P. Graß, H. Willerscheid, Machining of Fibre Reinforced Plastics, CIRP Ann. – Manuf. Technol. 34 (1985) 537–548 [CrossRef] [Google Scholar]
  9. J. Lévy Véhel, P. Legrand, Signal and image processing with Fraclab, in: C.A.F.i.N. Proceedings of Fractal04 Eighth International Multidisciplinary Conference, Vancouver, Canada, 2004 [Google Scholar]
  10. G. List, M. Nouari, D. Géhin, S. Gomez, J.P. Manaud, Y. Le Petitcorps, F. Girot, Wear behaviour of cemented carbide tools in dry machining of aluminium alloy, Wear 259 (2005) 1177–1189 [CrossRef] [Google Scholar]
  11. B. Mandelbrot, Les objets fractals: Forme, hasard et dimension, Flammarion, France, 1975 [Google Scholar]
  12. J. Mathew, N. Ramakrishnan, N.K. Naik, Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites, J. Mater. Process. Technol. 91 (1999) 1–11 [CrossRef] [Google Scholar]
  13. A. Molinari, C. Musquar, G. Sutter, Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling, Int. J. Plasticity 18 (2002) 443–459 [CrossRef] [Google Scholar]
  14. M. Nouari, G. List, F. Girot, D. Géhin, Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys, Int. J. Machine Tools Manufact. 45 (2005) 1436–1442 [CrossRef] [Google Scholar]
  15. E. Persson, I. Eriksson, L. Zackrisson, Effects of hole machining defects on strength and fatigue life of composite laminates, Compos. Part A: Appl. Sci. Manufact. 28 (1997) 141–151 [CrossRef] [Google Scholar]
  16. I.J. Polmear, Light Alloys – Metallurgy of the Light Metals, Halsted Press, 1996 [Google Scholar]
  17. M. Ramulu, T. Branson, D. Kim, A study on the drilling of composite and titanium stacks, Compos. Struct. 54 (2001) 67–77 [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  18. F. Roueff, J. Lévy Véhel, A Regularization Approach to Fractional Dimension Estimation, Fractals 98, edited by M.M. Novak, World Scientific, 1998 [Google Scholar]
  19. B. Sapoval, Universalités et fractales, Science, Flammarion, France, 1997 [Google Scholar]
  20. I.S. Shyha, S.L. Soo, D.K. Aspinwall, S. Bradley, R. Perry, P. Harden, S. Dawson, Hole quality assessment following drilling of metallic-composite stacks, Int. J. Machine Tools Manufact. 51 (2011) 569–578 [CrossRef] [Google Scholar]
  21. D.A. Stephenson, J.S. Agapiou, Metal cutting theory and practice, CRC press, 2005 [Google Scholar]
  22. H.K. Tönsheff, T. Friemuth, M. Groppe, A solution for an economical machining of bore holes in composite materials (CFK, aluminum), in: Proceedings of 3rd International Conference on Metal Cutting and High Speed Machining, Metz, France, 2001 [Google Scholar]
  23. C.C. Tsao, H. Hocheng, Effect of tool wear on delamination in drilling composite materials, Int. J. Mech. Sci. 49 (2007) 983–988 [CrossRef] [Google Scholar]
  24. J. Yang, Y. Zhang, Y. Zhu, Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension, Mech. Syst. Signal Process. 21 (2007) 2012–2024 [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  25. X. Yang, C. Richard Liu, Machining titanium and its alloys, Machin. Sci. Technol. 3 (1999) 107–139 [CrossRef] [Google Scholar]
  26. P.F. Zhang, N.J. Churi, Z.J. Pei, C. Treadwell, Mechanical drilling processes for titanium alloys: a literature review, Machin. Sci. Technol. 12 (2008) 417–444 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.