EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 18 / No 1 (2017) Mechanics & Industry, 18 1 (2017) 102 References
Open Access
Issue
Mechanics & Industry
Volume 18, Number 1, 2017
Article Number 102
Number of page(s) 8
DOI https://doi.org/10.1051/meca/2016004
Published online 03 October 2016
  1. S.E. Groves, C.E. Harris, A.L. Highsmith, D.H. Allen, R.G. Norvell, An experimental and analytical treatment of matrix cracking in cross-ply laminates, Exp. Mech. 27 (1987) 73–79 [CrossRef] [Google Scholar]
  2. J.M. Berthelot, P. Leblonb, El mahi, J.F. Le core, Transverse cracking of cross ply laminates: part Analysis, Composites A 27 (1996) 989–1001 [CrossRef] [Google Scholar]
  3. J.A. Nairn, D.A. Mendels, On the use of planar shear-lag methods for stress transfer analysis of multilayered composites, Mech. Mater. 33 (2001) 335–362 [CrossRef] [Google Scholar]
  4. T. Yokozeki, T. Aoki, Overall thermoelastic properties of symmetric laminates containing obliquely crossed matrix cracks, Compos. Sci. Technol. 65 (2005) 1647–1654 [CrossRef] [Google Scholar]
  5. A. Tounsi, K.H. Amara, A. Benzair, A. Megueni, On the transverse cracking and stiffness degradation of aged angle-ply laminates, Mater. Lett. 60 (2006) 2561–2564 [CrossRef] [Google Scholar]
  6. E.A. Adda-bedia, M. Bouazzaa, A. Tounsi, A. Benzair, M. Maachou, Prediction of stiffness degradation in hygrothermal aged [θm/90n]s composite laminates with transverse cracking, J. Mater. Process. Technol. 199 (2008) 199–205 [CrossRef] [Google Scholar]
  7. Z. Hashin, Analysis of cracked laminates: a variational approach, Mech. Mater. 4 (1985) 121–136 [CrossRef] [Google Scholar]
  8. V. Vinogradov, Z. Hashin, Variational analysis of cracked angle-ply laminates, Compos. Sci. Technol. 70 (2010) 638–646 [CrossRef] [Google Scholar]
  9. E.J. Barbero, F.A. Cosso, Determination of material parameters for discrete damage mechanics analysis of carbon-epoxy laminates, Composites B 56 (2014) 638–646 [CrossRef] [Google Scholar]
  10. M. Hajikazemi, M.H. Sadr, Stiffness reduction of cracked general symmetric laminates using a variational approach, Int. J. Solids Struct. 51 (2014) 1483–1493 [CrossRef] [Google Scholar]
  11. D.T.G. Katerelos, A. Krasnikovs, J. Varna, Variational models for shear modulus of symmetric and balanced laminates with cracks in 90° -layer, Int. J. Solids Struct. 71 (2015) 169–179 [CrossRef] [Google Scholar]
  12. L.N. McCartney, Theory of stress transfer in a [0/90]s cross ply laminate containing a parallel array of transverse cracks, J. Mech. Phys. Solids 40 (1992) 27–68 [CrossRef] [Google Scholar]
  13. P. Lundmark, J. Varna, Stiffness reduction in laminates at high intralaminar crack density: effect of crack interaction, Int. J. Damage Mech. 20 (2011) 279–297 [CrossRef] [Google Scholar]
  14. R. Joffe, A. Krasnikovs, J. Varna, COD-based simulation of transverse cracking and stiffness reduction in [S/90n]s laminates, Compos. Sci. Technol. 61 (2001) 637–656 [CrossRef] [Google Scholar]
  15. C.V. Singh, R. Talreja, A synergistic damage mechanics approach for composite laminates with matrix cracks in multiple orientations, Mech. Mater. 41 (2009) 954–968 [CrossRef] [Google Scholar]
  16. V.M.K. Akula, M.R. Garnich, Effective ply and constituent elastic properties for cracked laminates, Composite B 43 (2012) 2143–2151 [CrossRef] [Google Scholar]
  17. S. Li, C.V. Singh, R. Talreja, A representative volume element based on translational symmetries for FE analysis of cracked laminates with two arrays of cracks, Int. J. Solids Struct. 46 (2009) 1793–1804 [CrossRef] [Google Scholar]
  18. M.H. Han, J.A. Nairn, Hygrothermal aging of polyimide matrix composite laminates, Composites A 34 (2003) 979–986 [CrossRef] [Google Scholar]
  19. C.H. Shen, G. Springer, Moisture absorption and desorption of composite materials, J. Compos. Mater. 10 (1976) 2–20 [CrossRef] [Google Scholar]
  20. M. Zidi, A. Tounsi, M.S.A. Houari, E.A. Adda Bedia, O. Anwar, Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory, Aerosp. Sci. Technol. 34 (2014) 24–34 [CrossRef] [Google Scholar]
  21. F. Chattibi, K.H. Benrahou, A. Benachour, K. Nedri, A. Tounsi, Thermomechanical effects on the bending of antisymmetric cross-ply composite plates using a four variable sinusoidal theory, Steel Composite Struct. 19 (2015) 93–110 [CrossRef] [Google Scholar]
  22. K. Amara, M. Bouazza, K. Antar, A. Megueni, Evaluation of the stiffness of composite materials with hygrothermal conditions, Leonardo J. Sci. 25 (2014) 57–64 [Google Scholar]
  23. A. Tounsi, K.H. Amara, E.A. Adda-dedia, Analysis of transverse cracking and stiffness loss in cross-ply laminates with hygrothermal conditions, Comput. Mater. Sci. 32 (2005) 167–174 [CrossRef] [Google Scholar]
  24. M. Bouazza, A. Tounsi, A. Benzair, E.A. Adda-dedia, Effect of transverse cracking on stiffness reduction of hygrothermal aged cross-ply laminates, Mater. Design 28 (2007) 1116–1123 [CrossRef] [Google Scholar]
  25. S.W. Tsai, Composite design, Think composite, 4th edition, Dayton, 1988 [Google Scholar]
  26. R. Menaa, A. Tounsi, F. Mouaici, I. Mechab, M. Zidi, E. A. Adda Bedia, Analytical solutions for static shear correction factor of functionally graded rectangular beams, Mech. Adv. Mater. Struct. 19 (2012) 641–652 [CrossRef] [Google Scholar]
  27. A. Tounsi, M.S.A. Houari, S. Benyoucef, E.A. Adda Bedia, A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates, Aerosp. Sci. Technol. 24 (2013) 209–220 [CrossRef] [Google Scholar]
  28. S. Ait Yahia, H. Ait Atmane, M.S.A. Houari, A. Tounsi, Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories, Struct. Eng. Mech. 53 (2015) 1143–1165 [CrossRef] [Google Scholar]
  29. M. Ait Amar, H.H. Abdelaziz, A. Tounsi, An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions, J. Sandwich Struct. Mater. 16 (2014) 293–318 [CrossRef] [Google Scholar]
  30. Z. Belabed, M.S.A. Houari, A. Tounsi, S.R. Mahmoud, O. Anwar Bég, An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates, Composites B 60 (2014) 274–283 [CrossRef] [Google Scholar]
  31. A.A. Bousahla, M.S.A. Houari, A. Tounsi, E.A. Adda Bedia, A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates, Int. J. Comput. Methods 11 (2014) 1350082 [CrossRef] [MathSciNet] [Google Scholar]
  32. H. Hebali, A. Tounsi, M.S.A. Houari, A. Bessaim, E.A. Adda Bedia, A new quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates, ASCE J. Eng. Mech. 140 (2014) 374–383 [CrossRef] [Google Scholar]
  33. M. Bourada, A. Kaci, M.S.A. Houari, A. Tounsi, A new simple shear and normal deformations theory for functionally graded beams, Steel Compos. Struct. 18 (2015) 409–423 [CrossRef] [Google Scholar]
  34. L. Ould Larbi, A. Kaci, M.S.A. Houari, A. Tounsi, An efficient shear deformation beam theory based on neutral surface position for bending and free vibration of functionally graded beams, Mechanics Based Design of Structures and Machines 41 (2013) 421–433 [CrossRef] [Google Scholar]
  35. A. Benkhedda, A. Tounsi, E.A. Adda Bedia, Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates, Compos. Struct. 82 (2008) 629–635 [CrossRef] [Google Scholar]
  36. T. Rezoug, A. Benkhedda, M. Khodjet-kesba, E. Adda Bedia, Analysis of the composite patches cracked and aged in hygrothermal conditions, Mechanics and Industry 12 (2011) 395–398 [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.