Open Access
Mechanics & Industry
Volume 18, Number 5, 2017
Article Number 508
Number of page(s) 12
Published online 01 November 2017
  1. R. Pai, D.J. Hargreaves, Water Lubricated Bearings, Springer, Berlin, Heidelberg, 2012, pp. 347–391 [Google Scholar]
  2. R. Pai, D.J. Hargreaves, Water lubricated bearings, in: M. Nosonovsky, B. Bhushan (ed.), Green Tribology, Springer, Berlin, Heidelberg, 2012, pp. 347–391 [CrossRef] [Google Scholar]
  3. W. Litwin, Influence of main design parameters of ship propeller shaft water-lubricated bearings on their properties, Pol. Marit. Res. 17 (2010) 39–45 [EDP Sciences] [Google Scholar]
  4. W. Litwin, Experimental research on water lubricated three layer sliding bearing with lubrication grooves in the upper part of the bush and its comparison with a rubber bearing, Tribol. Int. 82 (2015) 153–161 [Google Scholar]
  5. W. Litwin, Properties comparison of rubber and three layer PTFE-NBR-bronze water lubricated bearings with lubricating grooves along entire bush circumference based on experimental tests, Tribol. Int. 90 (2015) 404–411 [CrossRef] [Google Scholar]
  6. W. Litwin, A. Olszewski, Water-lubricated sintered bronze journal bearings—theoretical and experimental research, Tribol. Trans. 57 (2013) 114–122 [Google Scholar]
  7. KP. Gertzos, PG. Nikolakopoulos, CA. Papadopoulos, CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant, Tribol. Int. 41 (2008) 1190–1204 [CrossRef] [Google Scholar]
  8. G. Gao, Z. Yin, D. Jiang, X. Zhang, Numerical analysis of plain journal bearing under hydrodynamic lubrication by water, Tribol. Int. 75 (2014) 31–38 [Google Scholar]
  9. G. Gao, Z. Yin, D. Jiang, X. Zhang, Y. Wang, Analysis on design parameters of water-lubricated journal bearings under hydrodynamic lubrication, Proc. Inst. Mech. Eng. J: J. Eng. Tribol. 230 (2015) 1019–1029 [CrossRef] [Google Scholar]
  10. X. Zhang, Z. Yin, G. Gao, Z. Li, Determination of stiffness coefficients of hydrodynamic water-lubricated plain journal bearings, Tribol. Int. 85 (2015) 37–47 [Google Scholar]
  11. X. Zhang, Z. Yin, D. Jiang, G. Gao, The design of hydrodynamic water-lubricated step thrust bearings using CFD method, Mech. Ind. 15 (2014) 197–206 [Google Scholar]
  12. X. Zhang, Z. Yin, D. Jiang, G. Gao, Y. Wang, X. Wang, Load carrying capacity of misaligned hydrodynamic water-lubricated plain journal bearings with rigid bush materials, Tribol. Int. 99 (2016) 1–13 [CrossRef] [Google Scholar]
  13. W. Litwin, Influence of local bush wear on water lubricated sliding bearing load carrying capacity, Tribol. Int. 103 (2016) 352–358 [CrossRef] [Google Scholar]
  14. Y. Wang, Z. Yin, D. Jiang, G. Gao, X. Zhang, Study of the lubrication performance of water-lubricated journal bearings with CFD and FSI method, Ind. Lubr. Tribol. 3 (2016) 341–348 [CrossRef] [Google Scholar]
  15. H. Liu, H. Xu, PJ. Ellison, Z. Jin, Application of computational fluid dynamics and fluid-structure interaction method to the lubrication study of a rotor-bearing system, Tribol. Lett. 38 (2010) 325–336 [CrossRef] [Google Scholar]
  16. Q. Lin, Z. Wei, N. Wang, W. Chen, Analysis on the lubrication performances of journal bearing system using computational fluid dynamics and fluid–structure interaction considering thermal influence and cavitation, Tribol. Int. 64 (2013) 8–15 [CrossRef] [Google Scholar]
  17. B.S. Shenoy, R.S. Pai, D.S. Rao, R. Pai, Elasto-hydrodynamic lubrication analysis of full 360' journal bearing using CFD and FSI techniques, World J. Model. Simul. 5 (2009) 315–320 [Google Scholar]
  18. E. Kuznetsov, S. Glavatskih, M. Fillon, THD analysis of compliant journal bearings considering liner deformation, Tribol. Int. 44 (2011) 1629–1641 [CrossRef] [Google Scholar]
  19. PG. Nikolakopoulos, CA. Papadopoulos, A study of friction in worn misaligned journal bearings under severe hydrodynamic lubrication, Tribol. Int. 41 (2008) 461–472 [CrossRef] [Google Scholar]
  20. T. Kazama, Y. Narita, Mixed and fluid film lubrication characteristics of worn journal bearings, Adv. Tribol. 2012 (2012) 1–7 [CrossRef] [Google Scholar]
  21. A. Kumar, S.S. Mishra, Steady state analysis of noncircular worn journal bearings in nonlaminar lubrication regimes, Tribol. Int. 29 (1996) 493–498 [CrossRef] [Google Scholar]
  22. K.F. Dufrane, J.W. Kannel, T.H. McCloskey, Wear of steam-turbine journal bearings at low operating speeds, J. Lubr. Technol. 105 (1983) 313 [CrossRef] [Google Scholar]
  23. H. Hashimoto, S. Wada, K. Nojima, Performance characteristics of worn journal bearings in both laminar and turbulent regimes. Part I: steady-state characteristics, ASLE Trans. 29 (1986) 565–571 [CrossRef] [Google Scholar]
  24. P.G. Nikolakopoulos, C.I. Papadopoulos, L. Kaiktsis, Elastohydrodynamic analysis and Pareto optimization of intact, worn and misaligned journal bearings, Meccanica 46 (2010) 577–588 [CrossRef] [Google Scholar]
  25. E.R. Nicodemus, S.C. Sharma, Performance characteristics of micropolar lubricated membrane-compensated worn hybrid journal bearings, Tribol. Trans. 55 (2012) 59–70 [CrossRef] [EDP Sciences] [Google Scholar]
  26. E.R. Nicodemus, S.C. Sharma, A study of worn hybrid journal bearing system with different recess shapes under turbulent regime, J. Tribol. 132 (2010) 041704 [CrossRef] [Google Scholar]
  27. M. Fillon, J. Bouyer, Thermohydrodynamic analysis of a worn plain journal bearing, Tribol. Int. 37 (2004) 129–136 [CrossRef] [Google Scholar]
  28. J. Bouyer, M. Fillon, I. Pierre-Danos, Influence of wear on the behavior of a two-lobe hydrodynamic journal bearing subjected to numerous startups and stops. J. Tribol. 129 (2007) 205 [CrossRef] [Google Scholar]
  29. W. Litwin, Influence of main design parameters of ship propeller shaft water-lubricated bearings on their properties, Pol. Marit. Res. 17 (2010) 39–45 [EDP Sciences] [Google Scholar]
  30. G.W. Stachowiak, A.W. Batchelor, Engineering tribology, Elsevier Butterworth-Heinemann, 2005 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.