Open Access
Issue
Mechanics & Industry
Volume 18, Number 6, 2017
Article Number 603
Number of page(s) 20
DOI https://doi.org/10.1051/meca/2016063
Published online 02 February 2018
  1. A. Laratta, Oil whirl of rotors. Part I: vertical shafts, Meccanica 4 (1969) 336–348 [CrossRef] [Google Scholar]
  2. O. Pinkus, M. Lynn, Analysis of elliptical bearings, Trans. ASME 78 (1956) 965–976 [Google Scholar]
  3. O. Pinkus, Power losses in elliptical and 3-lobe bearings, Trans. ASME 78 (1956) 899–904 [Google Scholar]
  4. P.K. Goenka, J. Booker, Effect of surface ellipticity on dynamically loaded cylindrical bearings, J. Tribol. 105 (1983) 1–9 [Google Scholar]
  5. M. Malik, A comparative study of some two-lobed journal bearing configurations, ASLE Trans. 26 (1983) 118–124 [CrossRef] [Google Scholar]
  6. W. Crosby, A thermohydrodynamic solution of the two-lobe bearing considering reverse flow at the leading and trailing edges, Wear 143 (1991) 159–173 [CrossRef] [Google Scholar]
  7. G.J. Kostrzewsky, D.V. Taylor, R.D. Flack, L.E. Barrett, Theoretical and experimental dynamic characteristics of a highly preloaded three-lobe journal bearing, Tribol. Trans. 41 (1998) 392–398 [CrossRef] [Google Scholar]
  8. J. Sharana Basavaraja, S. Sharma, S. Jain, A study of misaligned roughened two-lobe hole-entry hybrid journal bearing, Ind. Lubr. Tribol. 61 (2009) 220–227 [CrossRef] [Google Scholar]
  9. S.C. Sharma, P.B. Kushare, Two lobe non-recessed roughened hybrid journal bearing – a comparative study, Tribol. Int. 83 (2015) 51–68 [CrossRef] [Google Scholar]
  10. J. Greenwood, J. Wu, Surface roughness and contact: an apology, Meccanica 36 (2001) 617–630 [CrossRef] [Google Scholar]
  11. N. Tala-Ighil, M. Fillon, Surface texturing effect comparative analysis in the hydrodynamic journal bearings, Mech. Ind. 16 (2015) 302 [CrossRef] [Google Scholar]
  12. A. Charitopoulos, D. Fouflias, C.I. Papadopoulos, L. Kaiktsis, M. Fillon, Thermohydrodynamic analysis of a textured sector-pad thrust bearing: effects on mechanical deformations, Mech. Ind. 15 (2014) 403–411 [CrossRef] [Google Scholar]
  13. I. Etsion, G. Halperin, V. Brizmer, Y. Kligerman, Experimental investigation of laser surface textured parallel thrust bearings, Tribol. Lett. 17 (2004) 295–300 [CrossRef] [Google Scholar]
  14. R.B. Siripuram, L.S. Stephens, Effect of deterministic asperity geometry on hydrodynamic lubrication, J. Tribol. 126 (2004) 527–534 [CrossRef] [Google Scholar]
  15. S. Cupillard, M.J. Cervantes, S. Glavatskih, Pressure buildup mechanism in a textured inlet of a hydrodynamic contact, J. Tribol. 130 (2008) 021701 [CrossRef] [Google Scholar]
  16. S. Cupillard, S. Glavatskih, M. Cervantes, Computational fluid dynamics analysis of a journal bearing with surface texturing, Proc. Inst. Mech. Eng. J.: J. Eng. Tribol. 222 (2008) 97–107 [CrossRef] [Google Scholar]
  17. S. Kango, D. Singh, R. Sharma, Numerical investigation on the influence of surface texture on the performance of hydrodynamic journal bearing, Meccanica 47 (2012) 469–482 [CrossRef] [Google Scholar]
  18. I. Syed, M. Sarangi, Hydrodynamic lubrication with deterministic micro textures considering fluid inertia effect, Tribol. Int. 69 (2014) 30–38 [CrossRef] [Google Scholar]
  19. B. Bou-Said, H. Boucherit, M. Lahmar, On the influence of particle concentration in a lubricant and its rheological properties on the bearing behavior, Mech. Ind. 13 (2012) 111–121 [CrossRef] [Google Scholar]
  20. V.K. Stokes, Couple stresses in fluids, Phys. Fluids (1958–1988) 9 (1966) 1709–1715 [CrossRef] [Google Scholar]
  21. V.K. Stokes, Effects of couple stresses in fluids on the creeping flow past a sphere, Phys. Fluids (1958–1988) 14 (1971) 1580–1582 [CrossRef] [Google Scholar]
  22. G. Ramanaiah, P. Sarkar, Slider bearings lubricated by fluids with couple stress, Wear 52 (1972) 27–36 [CrossRef] [Google Scholar]
  23. J.R. Lin, Effects of couple stresses on the lubrication of finite journal bearings, Wear 206 (1997) 171–178 [CrossRef] [Google Scholar]
  24. J.R. Lin, Linear stability analysis of rotor-bearing system: couple stress fluid model, Comput. Struct. 79 (2001) 801–809 [CrossRef] [Google Scholar]
  25. Y.Y. Ma, W.H. Wang, X.H. Cheng, A study of dynamically loaded journal bearings lubricated with non-Newtonian couple stress fluids, Tribol. Lett. 17 (2004) 69–74 [CrossRef] [Google Scholar]
  26. W. Crosby, B. Chetti, The static and dynamic characteristics of a two-lobe journal bearing lubricated with couple-stress fluid, Tribol. Trans. 52 (2009) 262–268 [CrossRef] [Google Scholar]
  27. X.L. Wang, K.Q. Zhu, S.Z. Wen, On the performance of dynamically loaded journal bearings lubricated with couple stress fluids, Tribol. Int. 35 (2002) 185–191 [CrossRef] [Google Scholar]
  28. C. Singh, Lubrication theory for couple stress fluids and its application to short bearings, Wear 80 (1982) 281–290 [CrossRef] [Google Scholar]
  29. S. Guha, A theoretical analysis of dynamic characteristics of finite hydrodynamic journal bearings lubricated with coupled stress fluids, Proc. Inst. Mech. Eng. J: J. Eng. Tribol. 218 (2004) 125–133 [CrossRef] [Google Scholar]
  30. U. Mokhiamer, W. Crosby, H. El-Gamal, A study of a journal bearing lubricated by fluids with couple stress considering the elasticity of the liner, Wear 224 (1999) 194–201 [CrossRef] [Google Scholar]
  31. P.B. Kushare, S.C. Sharma, Influence of wear on the performance of 2-lobe slot entry hybrid journal bearings, Mech. Ind. 16 (2015) 502 [CrossRef] [Google Scholar]
  32. C.B. Khatri, S.C. Sharma, Influence of textured surface on the performance of non-recessed hybrid journal bearing operating with non-Newtonian lubricant, Tribol. Int. 95 (2016) 221–235 [CrossRef] [Google Scholar]
  33. V. Brizmer, Y. Kligerman, A laser surface textured journal bearing, J. Tribol. 134 (2012) 031702 [CrossRef] [Google Scholar]
  34. S.C. Sharma, S.K. Yadav, Performance analysis of a fully textured hybrid circular thrust pad bearing system operating with non-Newtonian lubricant, Tribol. Int. 77 (2014) 50–64 [CrossRef] [Google Scholar]
  35. W.B. Rowe, S.X. Xu, F.S. Chong, W. Weston, Hybrid journal bearings with particular reference to hole-entry configurations, Tribol. Int. 15 (1982) 339–348 [CrossRef] [Google Scholar]
  36. P.B. Kushare, S.C. Sharma, Nonlinear transient stability study of two lobe symmetric hole entry worn hybrid journal bearing operating with non-Newtonian lubricant, Tribol. Int. 69 (2014) 84–101 [CrossRef] [Google Scholar]
  37. J. Lund, K. Thomsen, A calculation method and data for the dynamic coefficients of oil-lubricated journal bearings, in: Topics in fluid film bearing and rotor bearing system design and optimization, Dyrobes, 1978, p. 1000118 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.