Open Access
Issue
Mechanics & Industry
Volume 19, Number 3, 2018
Article Number 313
Number of page(s) 12
DOI https://doi.org/10.1051/meca/2018025
Published online 04 October 2018
  1. J. Jeswiet, Asymmetric incremental sheet forming, in: Advanced Materials Research, Trans Tech Publ, 2005, pp. 35–58 [CrossRef] [Google Scholar]
  2. J. Kopac, Z. Kampus, Incremental sheet metal forming on CNC milling machine-tool, J. Mater. Process. Technol. 162 (2005) 622–628 [CrossRef] [Google Scholar]
  3. J. Duflou, J. Verbert, B. Belkassem, J. Gu, H. Sol, C. Henrard, A. Habraken, Process window enhancement for single point incremental forming through multi-step tool paths, CIRP Ann. −Manuf. Technol. 57 (2008) 253–256 [CrossRef] [Google Scholar]
  4. A. Attanasio, E. Ceretti, C. Giardini, L. Mazzoni, Asymmetric two points incremental forming: improving surface quality and geometric accuracy by tool path optimization, J. Mater. Process. Technol. 197 (2008) 59–67 [CrossRef] [Google Scholar]
  5. B.T. Araghi, G. Manco, M. Bambach, G. Hirt, Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming, CIRP Ann. 58 (2009) 225–228 [CrossRef] [Google Scholar]
  6. Y. Wang, W. Wu, Y. Huang, N.V. Reddy, J. Cao, Experimental and numerical analysis of double sided incremental forming, in: ASME 2009 International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers, 2009, pp. 613–618 [CrossRef] [Google Scholar]
  7. R. Malhotra, J. Cao, F. Ren, V. Kiridena, Z.C. Xia, N. Reddy, Improvement of geometric accuracy in incremental forming by using a squeezing toolpath strategy with two forming tools, J. Manuf. Sci. Eng. 133 (2011) 061019 [CrossRef] [Google Scholar]
  8. R. Malhotra, J. Cao, M. Beltran, D. Xu, J. Magargee, V. Kiridena, Z.C. Xia, Accumulative-DSIF strategy for enhancing process capabilities in incremental forming, CIRP Ann. −Manuf. Technol. 61 (2012) 251–254 [CrossRef] [Google Scholar]
  9. R. Xu, X. Shi, D. Xu, R. Malhotra, J. Cao, A preliminary study on the fatigue behavior of sheet metal parts formed with accumulative-double-sided incremental forming, Manuf. Lett. 2 (2014) 8–11 [CrossRef] [Google Scholar]
  10. M. Sedighi, M. Riahi, A. Asgari, An analytical method for prediction of the incremental sheet metal punching process, Int. J. Adv. Manuf. Technol. 78 (2015) 231–238 [CrossRef] [Google Scholar]
  11. A. Asgari, M. Sedighi, M. Riahi, Investigation of punching parameters effect on mechanical properties of Al-1100–O in incremental sheet metal hammering process, Strength Mater. 47 (2015) 882–889 [CrossRef] [Google Scholar]
  12. A. Asgari, M. Sedighi, M. Riahi, Design and development of an incremental sheet metal hammering system using mass damper, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 231 (2017) 1611–1618 [CrossRef] [Google Scholar]
  13. A. Asgari, M. Sedighi, M. Riahi, Investigation of dimensional accuracy in incremental sheet metal hammering process: a parametric study, Mech. Ind. 16 (2015) 308 [CrossRef] [Google Scholar]
  14. S.A.A. Asghari, A. Shamsi Sarband, M. Habibnia, Optimization of multiple quality characteristics in two-point incremental forming of aluminum 1050 by grey relational analysis, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci. (2017) 0954406217693658 [Google Scholar]
  15. H. Zhang, B. Lu, J. Chen, S. Feng, Z. Li, H. Long, Thickness control in a new flexible hybrid incremental sheet forming process, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 231 (2017) 779–791 [CrossRef] [Google Scholar]
  16. M.A. Davarpanah, Z. Zhang, S. Bansal, J. Cao, R. Malhotra, Preliminary investigations on double sided incremental forming of thermoplastics, Manuf. Lett. 8 (2016) 21–26 [CrossRef] [Google Scholar]
  17. P. Tandon, O.N. Sharma, Experimental investigation into a new hybrid-forming process: incremental stretch drawing, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. (2016) 0954405416645983 [Google Scholar]
  18. L.B. Said, J. Mars, M. Wali, F. Dammak, Effects of the tool path strategies on incremental sheet metal forming process, Mech. Ind. 17 (2016) 411 [CrossRef] [EDP Sciences] [Google Scholar]
  19. S. Boudhaouia, M.A. Gahbiche, E. Giraud, Y. Ayed, W.B. Salem, P. Dal Santo, Experimental and numerical study of single point incremental forming for a spiral toolpath strategy, in: International Conference Design and Modeling of Mechanical Systems, Springer, 2017, pp. 1007–1015 [Google Scholar]
  20. A. Bansal, R. Lingam, S.K. Yadav, N.V. Reddy, Prediction of forming forces in single point incremental forming, J. Manuf. Process. 28 (2017) 486–493 [CrossRef] [Google Scholar]
  21. M. Otsu, T. Ogawa, T. Muranaka, H. Yoshimura, R. Matsumoto, Improvement of forming limit and accuracy in friction stir incremental forming with multistage forming, Procedia Eng. 207 (2017) 807–812 [CrossRef] [Google Scholar]
  22. K. Suresh, H. Nasih, N. Jasti, M. Dwivedy, Experimental studies in multi- stage incremental forming of steel sheets, Mater. Today Proc. 4 (2017) 4116–4122 [CrossRef] [Google Scholar]
  23. T. McAnulty, J. Jeswiet, M. Doolan, Formability in single point incremental forming: a comparative analysis of the state of the art, CIRP J. Manuf. Sci. Technol. 16 (2017) 43–54 [CrossRef] [Google Scholar]
  24. P. Memicoglu, O. Music, C. Karadogan, Simulation of incremental sheet forming using partial sheet models, Procedia Eng. 207 (2017) 831–835 [CrossRef] [Google Scholar]
  25. H. Lu, M. Kearney, C. Wang, S. Liu, P.A. Meehan, Part accuracy improvement in two point incremental forming with a partial die using a model predictive control algorithm, Precis. Eng. 49 (2017) 179–188 [CrossRef] [Google Scholar]
  26. J. Min, B. Kuhlenkötter, C. Shu, D. Störkle, L. Thyssen, Experimental and numerical investigation on incremental sheet forming with flexible die-support from metallic foam, J. Manuf. Process. 31 (2018) 605–612 [CrossRef] [Google Scholar]
  27. M. Shamsari, M.J. Mirnia, M. Elyasi, H. Baseri, Formability improvement in single point incremental forming of truncated cone using a two-stage hybrid deformation strategy, Int. J. Adv. Manuf. Technol. 94 (2018) 2357–2368 [CrossRef] [Google Scholar]
  28. M.J. Mirnia, M. Vahdani, M. Shamsari, Ductile damage and deformation mechanics in multistage single point incremental forming, Int. J. Mech. Sci. (2018) [Google Scholar]
  29. V.K. Barnwal, S. Chakrabarty, A. Tewari, K. Narasimhan, S.K. Mishra, Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet, Int. J. Adv. Manuf. Technol. 95 (2018) 921–935 [CrossRef] [Google Scholar]
  30. A. Abdollahi Taheri, B. Soltani, Simulation of pyramidal incremental forming process, and the effect of toolpath on the dimensional precision, in: 21st Conference on Mechanical Engineering (ISME), (2017) [Google Scholar]
  31. H. Ghasemi, B. Soltani, Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming, Modares Mech. Eng. 14 (2015) 89–96 [Google Scholar]
  32. S. Nourouzi, M. Shakeri, M. Habibnia, Effect of friction stir welding parameters on microstructure and mechanical properties of dissimilar joint al alloy to stainless steel, Aerosp. Mech. J. 11 (2013) 69–75 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.