EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 19 / No 6 (2018) Mechanics & Industry, 19 6 (2018) 603 References
Open Access
Issue
Mechanics & Industry
Volume 19, Number 6, 2018
Article Number 603
Number of page(s) 8
DOI https://doi.org/10.1051/meca/2018045
Published online 01 February 2019
  1. Y. Todaka, M. Umemoto, K. Tsuchiya, Comparison of nanocrystalline surface layer in steels formed by air blast and ultrasonic shot peening, Mater. Trans. 45 (2004) 376–379 [CrossRef] [Google Scholar]
  2. M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, A. Dogui, FEM modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity, Mater. Sci. Eng. 426 (2006) 173–180 [Google Scholar]
  3. K. Taehyung, L. Hyungyil, K. Minsoo, J. Sunghwan, A 3D FE model with plastic shot for evaluation of equi-biaxial peening residual stress due to multi-impacts, Surf. Coat. Technol. 206 (2012) 3981–3988 [Google Scholar]
  4. T. Chaise, J. Li, D. Nelias, R. Kubler, S. Taheri, G. Douchet, V. Robin, P. Gilles, Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP), J. Mater. Process. Technol. 212 (2012) 2080–2090 [CrossRef] [Google Scholar]
  5. T. Rousseau, T. Hoc, P. Gilles, C. Nouguier-Lehon, Effect of bead quantity in ultrasonic shot peening: surface analysis and numerical simulations, J. Mater. Process. Technol. 225 (2015) 413–420 [CrossRef] [Google Scholar]
  6. ABAQUS Theory Manual, Version 6.10, Hibbitt, Karlsson and Sorensen Inc., USA, 2011 [Google Scholar]
  7. R. Fathallah, Modélisation du Procédé de Grenaillage:Incidence des Billes et Taux de Recouvrement, PhD thesis, ENSAM, Paris, 1994 [Google Scholar]
  8. J.-L. Chaboche, Sur l'utilisation des variables d'état interne pour la description de la viscoplasticité cyclique avec endommagement, in Problèmes Non Linéaires de Mécanique, Symposium Franco-Polonais de Rhéologie et Mécanique, 1977, pp. 137–159 [Google Scholar]
  9. A. Laamouri, H. Sidhom, C. Braham, Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316Lstainless steel ground surfaces: experimental and numerical approaches, Int. J. Fatigue 48 (2013) 109–121 [Google Scholar]
  10. P. Sanjurjo, C. Rodríguez, I. Peñuelas, T.E. García, F. Javier Belzunce, Influence of the target material constitutive model on the numerical simulation of a shot peening process, Surf. Coat. Technol. 258 (2014) 822–831 [Google Scholar]
  11. R. Seddik, A. Bahloul, A. Atig, R. Fathallah, A simple methodology to optimize shot-peening process parameters using finite element simulations, Int. J. Adv. Manuf. Technol. 90 (2017) 2345–2361 [Google Scholar]
  12. R. Seddik, R. Ben Sghaier, R. Fathallah, A numerical-analytical approach to predict the effects of shot peening on the fatigue performance of the nickel-based super alloy Waspaloy, Proc. Inst. Mech. Eng. Part L: J. Mater. Des. Appl. (2016). DOI: 10.1177/1464420716663030 [Google Scholar]
  13. A.A. Ahmed, M. Mhaede, M. Basha, M. Wollmann, L. Wagner, The effect of shot peening parameters and hydroxyapatite coating on surface properties and corrosion behavior of medical grade AISI 316L stainless steel, Surf. Coat. Technol. 280 (2015) 347–358 [Google Scholar]
  14. J. Li, Simulation de Réparation par Soudage et Billage Ultrasonore d'un Alliage à base nickel, PhD thesis, LaMCoS, Lyon, 2011 [Google Scholar]
  15. K. Dai, L. Shaw, Comparison between shot peening and surface nanocrystallization and hardening processes, Mater. Sci. Eng. A. 463 (2007) 46–53 [CrossRef] [Google Scholar]
  16. G.I. Mylonas, G. Labeas, Numerical modelling of shot peening process and corresponding products: residual stress, surface roughness and cold work prediction, Surf. Coat. Technol. 205 (2011) 4480–4494 [Google Scholar]
  17. R. Ben Sghaier, Ch. Bouraoui, R. Fathallah, G. Degallaix, High cycle fatigue based reliability design of welded and shot peened high strength steel, Fatigue Fract. Eng. Mater. Struct. 33 (2010) 575–594 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.