EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 20 / No 4 (2019) Mechanics & Industry, 20 4 (2019) 405 References
Open Access
Issue
Mechanics & Industry
Volume 20, Number 4, 2019
Article Number 405
Number of page(s) 9
DOI https://doi.org/10.1051/meca/2019030
Published online 11 July 2019
  1. R. Van Gestel, S. Mattheij, Rotor repairs, presented at ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition, The American Society of Mechanical Engineers, The Hague, Netherlands, 13–16 June 1994, pp. 1–9 [Google Scholar]
  2. E. Poursaeidi, M.K. Yazdi, Application of the hot spotting method for the straightening of a large turbine rotor, Int. J. Eng. Trans. A Basics 31 (2017) 110–119 [Google Scholar]
  3. D.M. Richard Avent, Heat Straightening of Damaged Steel Bridge: A Technical Guide and Manual of Practice, US Department of Transportation, Federal Highway Administration, Washington, DC, 1998 [Google Scholar]
  4. A. Varma, Y. Sohn, Effects of realistic heat straightening repair on the properties and serviceability of damaged steel bridges, Publication FHWA/IN/JTRP-2013/03, Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, 2013 [Google Scholar]
  5. F.B. Gatto, D. Mortvedt, C. Smith, J. McMillin, M.W. Baker, Practical Guide for Flame Bending of Pipe, Puget Sound Naval Shipyard, Bremerton, WA, 1991 [Google Scholar]
  6. S. Nelson, J. Dwight, D. Heagy, D. Mortvedt, B. Houghteling, F. Gatto, D. Coglizer, Flame Bending of Pipe for Alignment Control Panel SP-7 Project Report (The National Shipbuilding Program), Puget Sound Naval Shipyard, Bremerton, WA, 1990 [Google Scholar]
  7. X. Wang, J. Wang, W. Xu, D. Guo, Scanning path planning for laser bending of straight tube into curve tube, Opt. Laser Technol. 56 (2014) 43–51 [Google Scholar]
  8. H. Shen, F. Vollertsen, Modelling of laser forming − an review, Comput. Mater. Sci. 46 (2009) 834–840 [Google Scholar]
  9. Y. He, L. Heng, Z. Zhang, Z. Mei, L. Jing, L. Guangjun, Advances and trends on tube bending forming technologies, Chin. J. Aeronaut. 25 (2012) 1–12 [CrossRef] [EDP Sciences] [Google Scholar]
  10. H.B. Clausen, Plate Forming by Line Heating, Technical University of Denmark, Kongens Lyngby, 2000 [Google Scholar]
  11. H.B. Clausen, Three Dimensional Numerical Simulation of Plate Forming by Line Heating, ICCAS, Cambridge, MA, 1999 [Google Scholar]
  12. V. Adan, R. Sherif, S. Hisashi, M. Hidekazu, Influential factors affecting inherent deformation during plate forming by line heating (report 1), Trans. JWRI 36 (2007) 57–64 [Google Scholar]
  13. E. Poursaeidi, Y. Kamalzadeh, Causes of rotor distortions and applicable common straightening methods for turbine rotors and shafts, World Acad. Sci. Techno. 55 (2011) 213–218 [Google Scholar]
  14. R. Hashemi, I. Jalili, M. Abdolmohammadi, Experimental test and finite element analysis of line heating method for forming of ship hull steel plates, Modares Mech. Eng. 14 (2015) 9–16 [Google Scholar]
  15. A. Shahidi, M.M. Nekahi, A. Assempour, Investigation on line heating technique with cooling and determination of the heat paths by strain-based method, Modares Mech. Eng. 16 (2016) 293–304 [Google Scholar]
  16. P. Biswas, N.R. Mandal, O.P. Sha, Thermo-mechanical and experimental analysis of double pass line heating, Mar. Sci. Appl. 10 (2011) 190–198 [CrossRef] [Google Scholar]
  17. J.H. Woo, J.G. Shin, Analysis of heat transfer between the torch and the plate for the application of line heating, J. Manuf. Sci. Eng. 125 (2003) 794–800 [Google Scholar]
  18. ANSYS Help System, Swanson Analysis Systems, Houston, PA, 2017 [Google Scholar]
  19. Y. Shi, Z. Yao, H. Shen, J. Hu, Research on the mechanisms of laser forming for the metal plate, Int. J. Mach. Tool. Manuf. 46 (2006) 1689–1697 [Google Scholar]
  20. W. Li, Y.L. Yao, Laser bending of tubes: mechanism, analysis, and prediction, J. Manuf. Sci. Eng. 123 (2001) 674 [Google Scholar]
  21. S.E. Chavoshi, S.E. Mousavi Torshizi, V. Badali, Deformation mechanism analysis in pipe straightening with spot heating method, presented at 26th Annual International Conference on Mechanical Engineering − ISME 2018, Semnan, Iran, 2018, pp. 431–438 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.