EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 21 / No 1 (2020) Mechanics & Industry, 21 1 (2020) 104 References
Open Access
Issue
Mechanics & Industry
Volume 21, Number 1, 2020
Article Number 104
Number of page(s) 13
DOI https://doi.org/10.1051/meca/2019072
Published online 07 January 2020
  1. H.Y. Yang, B. Zhang, B. Xu, Development of axial piston pump/motor technology, J. Mech. Eng. 44, 1–8 (2008) [Google Scholar]
  2. Z.Y. Quan, L. Quan, J.M. Zhang, Review of energy efficient direct pump controlled cylinder electro-hydraulic technology, Renew. Sust. Energy Rev. 35, 336–346 (2014) [CrossRef] [Google Scholar]
  3. V.H. Vu, B. Bechir, T. Marc, J. Pierre, Operational modal analysis on a pump operating at varying speeds an industrial history case, Mech. Ind. 17, 1–10 (2016) [Google Scholar]
  4. J. Mele, A. Guzzomi, J. Pan, Correlation of centrifugal pump vibration to unsteady flow under variable motor speed, Mech. Ind. 15, 525–534 (2014) [CrossRef] [Google Scholar]
  5. Y. Zhao, J.J. Zhou, C.B. Jing, C. Wei, Effect of grooved face on the dynamic pressure support characteristics of cylinder/valve plate pair in the axial piston pump, J. Harbin Inst. Technol. 50, 169–174 (2018) [Google Scholar]
  6. J.H. Zhang, Q. Chao, B. Xu, Analysis of the cylinder block tilting inertia moment and its effect on the performance of high-speed electro-hydrostatic actuator pumps of aircraft, Chin. J. Aeronaut. 31, 169–177 (2018) [CrossRef] [Google Scholar]
  7. H.S. Tang, Y. Ren, J.W. Xiang, A novel model for predicting thermoelastohydrodynamic lubrication characteristics of slipper pair in axial piston pump, Int. J. Mech. Sci. 124, 109–121 (2017) [CrossRef] [Google Scholar]
  8. M. Rokala, O. Calonius, K.T. Koskinen, M. Pietola, Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig, in Proceedings of the JFPS International Symposium on Fluid Power. Toyama, 2008, pp. 91–94 [CrossRef] [Google Scholar]
  9. J.H. Zhang, Q. Chao, Q.N. Wang, B. Xu, Y. Chen, Y. Li, Experimental investigations of the slipper spin in an axial piston pump, Measurement 102, 112–120 (2017) [CrossRef] [Google Scholar]
  10. Y. Li, H.S. Deng, X.L. Wang, Experiment on friction and wear performance of textured port plate pair, J. Aerospace Power 29, 1591–1597 (2014) [Google Scholar]
  11. H.-S. Jeong, H.-E. Kim, On the instantaneous and average piston friction of swash plate type hydraulic axial piston machines, KSME Int. J. 18, 1700–1711 (2004) [CrossRef] [Google Scholar]
  12. N. Vatheuer, H. Murrenhoff, U. Bräckelmann, D. Breuer, Mechanical losses in the piston-bushing contact of axial piston units, JFPS Int. J. Fluid Power Syst. 8, 24–29 (2014) [CrossRef] [Google Scholar]
  13. S. Lin, J.B. Hu, Tribo-dynamic model of slipper bearings, Appl. Math. Model. 39, 548–558 (2015) [Google Scholar]
  14. N.D. Manring, The relative motion between the ball guide and slipper retainer within an axial-piston swash-plate type hydrostatic pump, J. Dyn. Syst. Measur. Control. 121, 518–523 (1999) [CrossRef] [Google Scholar]
  15. Y. Sun, J.H. Jiang, J.L. Liu, Relative position and friction power loss between slipper retainer and ball guide in axial piston pump, J. South China Univ. Technol. 39, 82–87 (2011) [Google Scholar]
  16. Y. Sun, Y. Li, J.H. Jiang, Stress analysis and experiments for slipper retainer and ball guide in axial piston pump, J. Xi'an Jiaotong Univ. 47, 103–108 (2013) [Google Scholar]
  17. B. Xu, C.G. Li, S.S. Xu, Research on the relative motion between the ball guider and retainer within axial piston pump based on virtual prototype, Mach. Tool Hydraulics 38, 18–21 (2010) [Google Scholar]
  18. B. Zhang, B. Xu, C.L. Xia, H.Y. Yang, Modeling and simulation on axial piston pump based on virtual prototype technology, J. Mech. Eng. 22, 84–90 (2009) [Google Scholar]
  19. T. Wang, M. Mao, S.S. Tang, J.T. Gai, H. Ji, Research on lubrication mechanism of retaining spherical pair of variable displacement axial piston pump, Acta Armamentarii 38, 424–432 (2017) [Google Scholar]
  20. H.S. Deng, C.L. Wang, L.X. Zhang, Study on flow ripple of balanced two-ring axial piston pump, Trans. Chin. Soc. Agric. Mach. 45, 305–309 (2014) [Google Scholar]
  21. H.S. Deng, K. Huang, C.L. Wang, Y.M. Li, Overturning moment of cylinder of balanced two-ring axial piston pump, J. Jilin Univ. (Eng. Technol. Ed.) 45, 1468–1473 (2015) [Google Scholar]
  22. H.S. Deng, R. Huang, C.L. Wang, K. Huang, T. He, L. Zheng, A swash-plate axial piston pump/motor compacting device. Patent No.CN104863812A, China, 26 Aug 2015 [Google Scholar]
  23. H.S. Deng, Q.C. Wang, H.F. Wang, C.L. Wang, Relative motion relation in the external return spherical bearing pair of a balanced double-row axial piston pump, Proc. Inst. Mech. Eng. C 233, 3858–3872 (2019) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.