Open Access
Issue
Mechanics & Industry
Volume 21, Number 6, 2020
Article Number 613
Number of page(s) 13
DOI https://doi.org/10.1051/meca/2020079
Published online 24 November 2020
  1. I. Hutchings, P. Shipway, Sliding wear, Tribology (Second Edition)-Friction and wear of engineering materials, 107–164, (2017) [Google Scholar]
  2. M. Kchaou, A. Sellami, R. Kus, J. Fajoui, R. Elleuch, F. Jaquemin, Tribological performance characterization of brake friction materials: What test? What coefficient of friction?, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233, (2019) [Google Scholar]
  3. A. Sellami, M. Kchaou, R. Elleuch, A-L. Cristol, Y. Desplanques, Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material, Materials and Design 59 , 84–93 (2014) [CrossRef] [Google Scholar]
  4. M. Kumar, J. Bijwe, Optimized selection of metallic fillers for best combination of performance properties of friction materials: A comprehensive study, Wear 303 , 569–583 (2013) [Google Scholar]
  5. N. Hentati, M. Kchaou, A. Cristol, D. Najjar, R. Elleuch, Impact of post-curing duration on mechanical, thermal and tribological behavior of an organic friction material, Materials and Design 63 , 699–709 (2014) [CrossRef] [Google Scholar]
  6. Y. Desplanques, O. Roussette, G. Degallaix, R. Copin, Y. Berthier, Analysis of tribological behavior of pad-disc contact in railway braking Part1. Laboratory test development, compromises between actual and simulated tribological triplets, Wear 262 , 582–591 (2007) [Google Scholar]
  7. R.H. Shen, L. He, Friction material and technology of its products. Beijing, China: Peking University Press, 2010 [Google Scholar]
  8. J. Bao, Y. Yin, Y. Lu, Y.D. Hu, A cusp catastrophe model for the friction catastrophe of mine brake material in continuous repeated brakings. Proc IMechE, Part J: J Engineering Tribology 227 , 1150–1156 (2013) [CrossRef] [Google Scholar]
  9. J.-J. Lee, J.-A. Lee, S. Kwon, J.-J. Kim, Effect of different reinforcement materials on the formation of secondary plateaus and friction properties in friction materials for automobiles, Triboogy International 120 , 70–79 (2018) [CrossRef] [Google Scholar]
  10. X. Xiao, Y. Yin, J. Bao, L. Lu, X. Feng, Review on the friction and wear of brake materials, Advances in Mechanical Engineering 8 , 1–10 (2016) [Google Scholar]
  11. R.K. Uyyuru, M.K. Surappa, S. Brusethaug, Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple, Wear 260 , 1248–1255 (2006) [Google Scholar]
  12. P. Zhanga, L. Zhanga, D. Weib, P. Wub, J. Caob, C. Shijiab, X. Qua, K. Fua, Effect of graphite type on the contact plateaus and friction properties of copper-based friction material for high-speed railway train, Wear 432–433 (2019) [Google Scholar]
  13. T. Peng, Q. Yan, G. Li, X. Zhang, Z. Wen, X. Jin, The braking behaviors of Cu-based metallic brake pad for high-speed train under different initial braking speed, Tribology Letters 65 , 135 (2017) [Google Scholar]
  14. A. Sellami, M. Kchaou, R. Kus, J. Fajoui, R. Elleuch, F. Jaquemin, Impact of brass contents on thermal, friction and wear properties of brake linings composites, Mechanics & Industry 19 , 605 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  15. M. Baklouti, A.L. Cristol, R. Elleuch, Y. Desplanques, Brass in brake linings: Key considerations for its replacement, Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 208–210 (1994–1996) [Google Scholar]
  16. M. Kchaou, A. Sellami, A.R. Abu Bakar, A.R. Mat Lazim, R. Elleuch, S. Kumar, Brass fillers in friction materials composition: Tribological and brake squeal characterization for suitable effect evaluation, Steel and Composite Structures 19 , 939–952 (2015) [CrossRef] [Google Scholar]
  17. M. Kumar, J. Bijwe, Non-asbestos organic (NAO) friction composites: Role of copper; its shape and amount, Wear 270 , 269–280 (2011) [Google Scholar]
  18. Y. Ha Chang, B. Soo Joo, S. Mok Lee, H. Jang, Size effect of tire rubber particles on tribological properties of brake friction materials, Wear 406–407 , 230 (2018) [Google Scholar]
  19. A. Ramadan, M.I. Khashaba, W.Y. Ali, Fade and temperature rise of automotive friction materials, Journal of the Egyptian Society of Tribology 8 , 53–66 (2011) [Google Scholar]
  20. B.K. Satapathy, J. Bijwe, Fade and Recovery Behavior of Non-Asbestos Organic (NAO) Composite Friction Materials based on Combinations of Rock Fibers and Organic Fibers, Journal of Reinforced Plastics and Composites 24 , 563–577 (2005) [CrossRef] [Google Scholar]
  21. T.R. Jaafar, A.M. Zaharudin, A. Pahmi, R. Kasiran, E. Abu Othman, Effect of carbon in brake friction materials on friction characteristics, Journal of Engineering Science 14 , 47–59 (2018) [CrossRef] [Google Scholar]
  22. M.K. Abdul Hamida, G.W. Stachowiak, S. Syahrullaila, The effect of external grit particle size on friction coefficients and grit embedment of brake friction material, Procedia Engineering 68 , 7–11 (2013) [Google Scholar]
  23. R.J. Talib, A. Muchtar, C.H. Azhar, Microstructural characteristics on the surface and subsurface of semi metallic automotive friction materials during braking process, Journal of Materials Processing Technology 140 , 694–709 (2003) [CrossRef] [Google Scholar]
  24. M. Eriksson, F. Bergman, S. Jacobson, On the nature of tribological contact in automotive brakes, Wear 252 , 26–36 (2002) [Google Scholar]
  25. P.J. Blau, Microstructure and detachment mechanism of friction layers on the surface of brake shoes, Journal of Materials Engineering Performance 12 , 56–60 (2003) [CrossRef] [Google Scholar]
  26. J. Day, X. Huang, N.L. Richards, Examination of a grit-blasting process for thermal spraying using statistical methods, Journal of Thermal Spray Technology 14 , 471–479 (2005) [CrossRef] [Google Scholar]
  27. H. Getu, J.K. Spelt, M. Papini, Conditions leading to the embedding of angular and spherical particles during the solid particle erosion of polymers, Wear 292-293 , 159–168(2012) [Google Scholar]
  28. I. Hutchings, Ph. Shipway, Wear by hard particles, Tribology (Second Edition) Friction and Wear of Engineering Materials, 165–123 (2017) [Google Scholar]
  29. Ch. Jubsilp, J. Singto, W. Yamo, S. Rimdusit, Effect of graphite particle size on tribological and mechanical properties of polybenzoxazine composites, Chemical Engineering Transactions 57 , 1351–1356 (2017) [Google Scholar]
  30. I. Hutchings, P. Shipway, Wear by hard particles, Tribology (Second Edition)-Friction and wear of engineering materials, 165–236 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.