Open Access
Mechanics & Industry
Volume 21, Number 6, 2020
Article Number 612
Number of page(s) 11
Published online 20 November 2020
  1. D. Zhao, Z.L. Lu, H. Zhao, X.Y. Li, B. Wang, P.J. Liu, A review of active control approaches in stabilizing combustion systems in aerospace industry [J], Prog Aerosp Sci 97 , 35–60 (2018) [CrossRef] [Google Scholar]
  2. X. Li, T. Zhang, Y. Yu, Hardware in the loop experimental study for the combined cooling, heat and power system controller [J]. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 23 , 1–29 (2019) [Google Scholar]
  3. T. Poinsot, A. Trouvé, D. Veynante, S. Candel, E. Esposito, Suppression of combustion instabilities by active control, J. Fluid Mech [J] 177 , 265–292 (1987) [CrossRef] [Google Scholar]
  4. A. Gransson, Active control of combustion instabilities [D]. Department of Automatic Control Lund Institute of Technology, 2001 [Google Scholar]
  5. S. Candel, Combustion instabilities coupled by pressure waves and their active control [J], Proc. Combust. Inst. 24 , 1277–1296 (1992) [CrossRef] [Google Scholar]
  6. C.O. Paschereit, E. Gutmakr, W. Weisenstein, Structure and control of thermos-acoustic instabilities in a gas-turbine combustor [J], Combust. Sci. Tech 138 , 213–232 (1998) [CrossRef] [Google Scholar]
  7. D.U. Campos-Delgado, B.B.H. Schuermans, K. Zhou, C.O. Paschereit, E. Gallestey, A. Poncet, Thermoacoustic instabilities [J]: Modelling and control. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 1–15 (2005) [Google Scholar]
  8. M. Küsell, W. Moser, M. Philipp, Motronic MED7 for gasoline direct injection engines: engine management system and calibration procedures [J]. SAE Technical Paper, 1999 [Google Scholar]
  9. S. Junling, H. Yanji, Combustion field absorption spectrum fault diagnosis technology. National Defense Industry Press [M] 11 , 15–18 (2014) [Google Scholar]
  10. E.R. Furlong, D.S. Baer, R.K. Hanson, Real-time adaptive combustion control using diode-laser absorption sensors [C]. Symposium on Combustion. Elsevier 27 , 103–111 (1998) [CrossRef] [Google Scholar]
  11. M.G. Allen, C.T. Butler, S.A. Johnson et al, An imaging neural network combustion control system for utility boiler applications. Combustion and Flame [J] 94 , 205–214 (1993) [CrossRef] [Google Scholar]
  12. D.P. Correia, P. Ferrao, A. Caldeira-Pires, Flame 3D tomography sensor for in-furnace diagnostics [J]. Proc Combust Inst. 28 , 431–438 (2000) [CrossRef] [Google Scholar]
  13. D.B. Vaidza, J.J. Horvath, A.E.S. Green, Remote temperature measurements in gas and gas-coal flames using the OH (0, 0) middle UV band, Appl. Opt. 21 , 3357–3362 (1982) [CrossRef] [PubMed] [Google Scholar]
  14. R.W.B. Pearse, A.G. Gaydon, Identification of molecular spectra. Chapman and Hall [J] 148 , 240 (1976) [Google Scholar]
  15. L.C. Haber, U. Vandsburger, W.R. Saunders et al, An examination of the relationship between chemiluminescent light emissions and heat release rate under non-adiabatic conditions [C]. ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers 39 , V002T02A041–V002T02A041 (2000) [Google Scholar]
  16. D.M. Brown, Combustion control apparatus and method [Z]. EP 39 , A1 (1995) [Google Scholar]
  17. D.M. Brown, J.B. Fedison, J.R. Hibshman et al, Silicon carbide photodiode sensor for combustion control [J]. IEEE Sensors Journal 5 , 983–988 (2005) [CrossRef] [Google Scholar]
  18. Y. Yifan, Research on extraction method of free oscillation main frequency [D]. Beijing: School of Electrical and Electronic Engineering, North China Electric Power University, 2016, 1–60 [Google Scholar]
  19. Y. Zhao, H. Xiangyang, G. Junhui et al, Data processing of spacecraft sinusoidal sweep test based on adaptive bandpass filtering [J]. Spacecraft Environmental Engineering 02 , 214–221 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.