EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 22 (2021) Mechanics & Industry, 22 (2021) 40 References
Open Access
Issue
Mechanics & Industry
Volume 22, 2021
Article Number 40
Number of page(s) 9
DOI https://doi.org/10.1051/meca/2021038
Published online 22 July 2021
  1. A.A. Griffith, The phenomena of rupture and flow in solids, Philos. Trans. Royal Soc. Lond. Ser A 221, 582–593 (1921) [Google Scholar]
  2. R.S. Rivlin, A.G. Thomas, Rupture of rubber. I. Characteristic energy for tearing, J. Polym. Sci. 10, 291–318 (1953) [Google Scholar]
  3. F. Zhang, X. Jiang et al., Mechanical analysis of sealing performance for compression packer rubber tube, Mech. Ind. 19, 309 (2018) [Google Scholar]
  4. F. Zhang, H. Shui, J.-M. Yang, Sealing performance and fatigue life of the fracturing packer rubber of various materials, Mech. Eng. Sci. 233, 6157–6166 (2019) [Google Scholar]
  5. D. Zhiping, C. Jieping, S. Chuanjiang, Analysis of fatigue crack growth life for rubber vibration damper, J. Mech. Eng. 046, 58–64 (2010) [Google Scholar]
  6. B. Wang, H. Lu, G.H. Kim, A damage model for the fatigue life of elastomeric materials, Mech. Mater. 34, 475–483 (2002) [Google Scholar]
  7. Y. Tomita, W. Lu, Computational characterization of micro-to macroscopic mechanical behavior and damage of polymers containing second-phase particles, Int. J. Damage Mech. 11, 129–149 (2002) [Google Scholar]
  8. W. Hao, W. Yingtao, Prediction on rubber fatigue life of tire based on fatigue crack propagation theory, Tire Ind. 36, 259–266 (2016) [Google Scholar]
  9. R.K. Luo, P.W. Cook, W.X. Wu et al., Fatigue design of rubber springs used in rail vehicle suspensions, Proc. Instn Mech. Eng. F 217, 237–240 (2003) [Google Scholar]
  10. R.K. Luo, P.W. Cook, W.X. Wu et al., An approach to evaluate the service life of rubber springs used in rail vehicle suspensions, Proc. Instn Mech. Eng. Part F 218, 173–177 (2004) [Google Scholar]
  11. R.K. Luo, W.X. Wu, Fatigue failure analysis of anti-vibration rubber spring, Eng. Fail. Anal. 13, 110–116 (2006) [Google Scholar]
  12. M. El Yaagoubi, D. Juhre, J. Meier, N. Kröger, T. Alshuth, U. Giese, Lifetime prediction of filled elastomers based on particle distribution and the J-integral evaluation, Int. J. Fatigue 112, 341–354 (2018) [Google Scholar]
  13. O. Gehrmann, M. El Yaagoubi, H. El Maanaoui, J. Meier, Lifetime prediction of simple shear loaded filled elastomers based on the probability distribution of particles, Polym. Test. 75, 229–236 (2019) [Google Scholar]
  14. E.Y. Mohammed, M. Jens, J. Daniel, Lifetime prediction of carbon black filled elastomers based on the probability distribution of particle using an inelastic and hyperelastic material model, Eng. Fail. Anal. 118 (2020) [Google Scholar]
  15. M.E. Yaagoubi, H.E. Maanaoui, J. Meier, New fatigue test sample: Lifetime prediction of carbon black filled elastomers based on the probability distribution of particles, Polymer 208 (2020) [Google Scholar]
  16. M. El Yaagoubi, D. Juhre, J. Meier, T. Alshuth, U. Giese, Prediction of tearing energy in mode III for filled elastomers, Theor. Appl. Fract. Mech. 88, 31–38 (2016) [Google Scholar]
  17. M. El Yaagoubi, D. Juhre, J. Meier, T. Alshuth, U. Giese, Prediction of energy release rate in crack opening mode (mode I) for filled and unfilled elastomers using the Ogden model, Eng. Fract. Mech. 182, 74–85 (2017) [Google Scholar]
  18. M. El Yaagoubi, D. Juhre, J. Meier, T. Alshuth, U. Giese, Tearing energy and path-dependent J-integral evaluation considering stress softening for carbon black reinforced elastomers, Eng. Fract. Mech. 190, 259–272 (2018) [Google Scholar]
  19. S. Jianbing, X. Sufang, L. Baohui, Large deformation contact analysis of O-type rubber seal ring based on Ogden model, Lubric. Eng. 39, 38–42 (2014) [Google Scholar]
  20. C. Jiazhao, H. Mingxiang, W. Xueren, W. Ting, Several typical constitutive models of rubber materials and their applicability, Mater. Rep. 29, 118–120+124 (2015) [Google Scholar]
  21. Y. Shan, W. Wei, Determination of material parameters in rubber-like superelastic constitutive model, China Rubber Ind. 61, 453–457 (2014) [Google Scholar]
  22. A. Aidy, M. Hosseini, S. Barkawi, Continuum damage mechanics modeling For fatigue life of elastomeric materials, Int. J. Struct. Integr. 1, 63–72 (2010) [Google Scholar]
  23. D. Zhiping, Y. Ronghua, H. Youjian, Fatigue life analysis of rubber elastic damping components based on continuous damage model, J. Mech. Eng. 50, 80–86 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.