Open Access
| Issue |
Mechanics & Industry
Volume 22, 2021
|
|
|---|---|---|
| Article Number | 18 | |
| Number of page(s) | 12 | |
| DOI | https://doi.org/10.1051/meca/2021015 | |
| Published online | 17 March 2021 | |
- A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, W.S. Miller, Recent development in aluminium alloys for aerospace applications, Mater. Sci. Eng. A 280, 102–107 (2000) [Google Scholar]
- J.A. Ferreira, P. Sun, J.J. Gracio, Close loop control of a hydraulic press for springback analysis, J. Mater. Process. Technol. 177, 377–381 (2006) [Google Scholar]
- P.F. Bariani, S. Bruschi, A. Ghiotti, F. Michieletto, Hot stamping of AA5083 aluminum alloy sheets, CIRP Ann-Manuf. Techn. 62, 251–254 (2013) [Google Scholar]
- G.L. Chen, M.H. Chen, N. Wang, J.W. Sun, Hot forming process with synchronous cooling for AA2024 aluminum alloy and its application, Int. J. Adv. Manuf. Technol. 86, 133–139 (2016) [Google Scholar]
- J.B. Li, L. Deng, X.Y. Wang, J.S. Jin, Research on residual stresses during hot stamping with flat and local-thickened plates, Int. J. Adv. Manuf. Technol. 92, 2987–2999 (2017) [Google Scholar]
- Z.J. Wang, W.Y. Chen, Y.D. Zhang, Z.T. Chen, Q. Liu, Study on the machining distortion of thin walled part caused by redistribution of residual stress, Chin. J. Aeronautics 18, 175–179 (2005) [Google Scholar]
- X.M. Huang, J. Sun, J.F. Li, Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation, Int. J. Adv. Manuf. Technol. 77, 1035–1041 (2015) [Google Scholar]
- J. Danckert, Reduction of the residual stresses in a deep drawn cup by modifying the draw die profile, CIRP Ann. Manuf. Technol. 44, 259–262 (1995) [Google Scholar]
- M.S. Ragab, H.Z. Orban, Effect of ironing on the residual stresses in deep drawn cups, J. Mater. Process. Technol. 99, 54–61 (2000) [Google Scholar]
- R. Greze, P.Y. Manach, H. Laurent, S. Thuillier, L.F. Menezes, Influence of the temperature on residual stresses and springback effect in an aluminium alloy, Int. J. Mech. Sci. 52, 1094–1100 (2010) [Google Scholar]
- K. Masoud, P. Ali, A. Ali, Influence of process parameters on residual stresses in deep-drawing process with FEM and experimental evaluations, J. Braz. Soc. Mech. Sci. 40, 157 (2018) [Google Scholar]
- M. Kleiner, R. Krux, W. Homberg, Analysis of residual stresses in high-pressure sheet metal forming, CIRP Ann. Manuf. Technol. 53, 211–214 (2004) [Google Scholar]
- C. Bruni, M. Celeghini, M. Geiger, F. Gabrielli, A study of techniques in the evaluation of springback and residual stress in hydroforming, Int. J. Adv. Manuf. Technol. 33, 929–939 (2007) [Google Scholar]
- X.Y. Wang, L. Deng, J.B. Li, Encyclopedia of aluminum and its alloys, 1st edn., Taylor & Francis Group, Abingdon, UK, 2018 [Google Scholar]
- L.J. Xia, L. Deng, J.S. Jin, X.Y. Wang, Influence of non-isothermal dies on bending springback and residual stress for aluminum alloy 2024, Forging Stamp. Technol. 41, 92–95 (2016) [Google Scholar]
- B.Z. Li, X.H. Jiang, J.G. Yang, S.Y. Liang, Effect of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part, J. Mater. Process. Technol. 216, 223–233 (2015) [Google Scholar]
- K. Mori, S. Nishijima, C.J. Tan, Two-stage cold stamping of magnesium alloy cups having small corner radius, Int. J. Mach. Tools Manuf. 49, 767–772 (2009) [Google Scholar]
- X.Y. Wang, W.T. Luo, J.C. Xia, G.A. Hu, Investigation of warm stamping forging process for car flywheel panel, Forging Stamp. Technol. 34, 33–36 (2009) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.