Open Access
Mechanics & Industry
Volume 24, 2023
Article Number 5
Number of page(s) 14
Published online 22 February 2023
  1. N. Bilgin, M.A. Demircin, H. Copur et al., Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results, Int. J. Rock Mech. Min. Sci. 43, 139–156 (2006) [CrossRef] [Google Scholar]
  2. S.Y. Liu, C.L. Du, X.X. Cui et al., Analysis and research on motion parameters of shearer drum, Coal Sci. Technol. 36, 4 (2008) [Google Scholar]
  3. J.Y. Li, Research on cutting load spectrum of shearer, China Univ. Mining Technol. (2017) [Google Scholar]
  4. P. Zhang, Research on cutting load and energy consumption characteristics of shearer (Liaoning Technical University, 2017) [Google Scholar]
  5. V.V. Gabov, D.A. Zadkov, Mathematical model of simple spalling formation during coal cutting with extracting machine, J. Phys.: Conf. Ser. 1015, 052007 (2018) [CrossRef] [Google Scholar]
  6. W.Y. Zou, Study on cutting characteristics of shearer cutting fault coal and rock (Liaoning University of Engineering and Technology, 2020) [Google Scholar]
  7. L.J. Zhao, Y.D. Wang, B. Wang, Analysis and prediction of working performance of shearer spiral drum in coal seam with gangue, China Mech. Eng. 32, 976–986 (2021) [Google Scholar]
  8. Y.J. Zhang, P.F. Cui, Effect analysis of different drum motion parameters on cutting performance of shearer, Mech. Res. Appl. 34, 3 (2021) [Google Scholar]
  9. C.J. Morris, The design of shearer drums with the aid of a computer, Mining Eng. 11, 289–295 (1980) [Google Scholar]
  10. H.W. Shen, H.R. Hardy, A.W. Khair, Laboratory study of acoustic emission and particle size distribution during rotary cutting, Int. J. Rock Mech. Min. Sci. 34, 635–636 (1997) [Google Scholar]
  11. Z.F. Jin, Research on optimal matching of motion parameters and reliability of key parts of thin seam shearer (Liaoning University of Engineering and Technology, 2017) [Google Scholar]
  12. C. Xu, Y.L. Wang, Z.J. Yang, Study on coal loading efficiency of drum of thin seam shearer, Mech. Des. Manufactur. 8, 3 (2018) [Google Scholar]
  13. L.J. Zhao, J.Y. Fan, X.J. Liu et al., Study on dynamic cutting process of shearer spiral drum, Mech. Sci. Technol. 38, 6 (2019) [Google Scholar]
  14. K.D. Gao, W.B. Xu, S.B. Jiang et al., Modeling test study on influencing factors of drum loading rate of thin seam shearer, J. Central South Univ. 26, 18 (2019) [Google Scholar]
  15. E.W. Chen, Optimization design of cutting parameters of shearer based on MATLAB, Mach. Manag. Dev. 7, 4 (2019) [Google Scholar]
  16. O. Su, Numerical simulation of rock cutting using the discrete element method, Int. J. Rock Mech. Min. Sci. 48, 434–442 (2010) [Google Scholar]
  17. S. Dinescu, A. Andras, Analysis of winning performance of shearer loader cutter head using modeling, in 2nd WSEAS International Conference on Engineering Mechanics, Structures and Engineering Geology (EMESEG '09) (2009) pp. 1937–1940 [Google Scholar]
  18. A. Ebrahimabadi, K. Goshtasbi, K. Shahriar et al., A model to predict the performance of roadheaders based on the Rock Mass Brittleness Index, J. Southern Afr. Inst. Mining Metall. 111, 355–364 (2011) [Google Scholar]
  19. M.J. Mikl, R. Tichy, W. Ecker et al., Development and testing of a technique for the simulation of the rock cutting process, in Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation (Taylor & Francis, Cape Town, South Africa, 2013), pp. 505–510 [Google Scholar]
  20. H.Y. Chen, X. Wang, J. Mao et al., Study on the influence of shearer traction speed on drum load under reconstruction theory, Mech. Strength 39, 6 (2017) [Google Scholar]
  21. X.H. Li, T. Li, L. Jiao et al., Simulation study on the influence of motion parameters on shearer drum load, J. Liaoning Univ. Eng. Technol. 36, 1191–1194 (2017) [Google Scholar]
  22. W.B. Ma, Analysis of influence of different operating parameters on shearer load, Mach. Manag. Dev. 36, 2 (2021) [Google Scholar]
  23. X.N. Liu, L.J. Zhao, Z.J. Feng et al., Research on optimal matching of kinematic parameters of shearer in thin seam, Mech. Sci. Technol. 36, 7 (2017) [Google Scholar]
  24. L.J. Zhao, S.J. Wen, X.N. Liu, Study on the influence of simulated particle radius on simulated drum cutting complex coal seam, Mech. Sci. Technol. 1, 6 (2020) [Google Scholar]
  25. T.J. Li, Calibration of macro and micro parameters of coal particle discrete element model and its relationship (Taiyuan University of Technology, 2019) [Google Scholar]
  26. J. Mao, X. Wang, H.Y. Chen et al., Optimization design and system development of shearer drum based on NSGA-III algorithm, China Mech. Eng. 29, 2335–2342 (2018) [Google Scholar]
  27. E.J. Bao, B. Ramade, B.B. Ton et al., Coal Breaking Theory of Shearer (Coal Industry Press, 1992) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.