Open Access
Mechanics & Industry
Volume 24, 2023
Article Number 28
Number of page(s) 20
Published online 18 August 2023
  1. C. Cheng, W. Xu, J. Shang, Kinematics, stiffness and natural frequency of a redundantly actuated masticatory robot constrained by two point-contact higher kinematic pairs, in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Hamgburg, Germany (2015), pp. 963–970 [Google Scholar]
  2. C. Cheng, W. Xu, J. Shang, Optimal distribution of the actuating torques for a redundantly actuated masticatory robot with two higher kinematic pairs, Nonlinear Dyn. 79, 1235–1255 (2014) [Google Scholar]
  3. W. Xu, J. Bronlund, Mastication Robots: Biological Inspiration to Implementation (Springer-Verlag, Berlin, Germany, 2010) [CrossRef] [Google Scholar]
  4. J. Wu, X. Chen, L. Wang, X. Liu, Dynamic load-carrying capacity of a novel redundantly actuated parallel conveyor, Nonlinear Dyn. 78, 241–250 (2014) [CrossRef] [Google Scholar]
  5. V. van der Wijk, S. Krut, F. Pierrot, J. Herder, Design and experimental evaluation of a dynamically balanced redundant planar 4-RRR parallel manipulator, Int. J. Robotics Res. 32, 744–759 (2013) [CrossRef] [Google Scholar]
  6. J. Hernández, A. Chemori, H. Sierra, J. Anieva, A new solution for machining with RA-PKMs: modelling, control and experiments, Mech. Mach. Theory 150, 103864 (2020) [CrossRef] [Google Scholar]
  7. A. Müller, Problems in the control of redundantly actuated parallel manipulators caused by geometric imperfections, Meccanica 46, 41–49 (2011) [CrossRef] [MathSciNet] [Google Scholar]
  8. W. Shang, S. Cong, Robust nonlinear control of a planar 2-DOF parallel manipulator with redundant actuation, Robot. Comput. Integr. Manufactur. 30, 597–604 (2014) [CrossRef] [Google Scholar]
  9. D. Liang, Y. Song, T. Sun, G. Dong, Optimum design of a novel redundantly actuated parallel manipulator with multiple actuation modes for high kinematic and dynamic performance, Nonlinear Dyn. 83, 631–658 (2015) [Google Scholar]
  10. Y. Zhao, F. Gao, Dynamic performance comparison of the 8PSS redundant parallel manipulator and its non-redundant counterpart-the 6PSS parallel manipulator, Mech. Mach. Theory 44, 991–1008 (2009) [CrossRef] [MathSciNet] [Google Scholar]
  11. J.V. Fontes, M.M. da Silva, On the dynamic performance of parallel kinematic manipulators with actuation and kinematic redundancies, Mech. Mach. Theory 103, 148–166 (2016) [CrossRef] [Google Scholar]
  12. S. Jin, J. Bae, J. Kim, T. Seo, Disturbance compensation of a dual-arm underwater robot via redundant parallel mechanism theory, Meccanica 52, 1711–1719 (2017) [CrossRef] [MathSciNet] [Google Scholar]
  13. Z. Liu, R. Tao, J. Fan, Z. Wang, F. Jing, M. Tan, Kinematics, dynamics, and load distribution analysis of a 4-PPPS redundantly actuated parallel manipulator, Mech. Mach. Theory 167, 104494 (2022) [CrossRef] [Google Scholar]
  14. X. Liu, J. Yao, Q. Li, Y. Zhao, Coordination dynamics and model-based neural network synchronous controls for redundantly full-actuated parallel manipulator, Mech. Mach. Theory 160, 104284 (2022) [Google Scholar]
  15. J. Wu, J. Wang, L. Wang, T. Li, Dynamics and control of a planar 3-DOF parallel manipulator with actuation redundancy, Mech. Mach. Theory 44, 835–849 (2009) [CrossRef] [MathSciNet] [Google Scholar]
  16. A. Lopes, Dynamic modeling of a Stewart platform using the generalized momentum approach, Commun. Nonlinear Sci. Numer. Simul. 14, 3389–3401 (2009) [CrossRef] [Google Scholar]
  17. A. Lopes, F. Almeida, The generalized momentum approach to the dynamic modeling of a 6-dof parallel manipulator, Multibody Syst. Dyn. 21, 123–146 (2009) [CrossRef] [MathSciNet] [Google Scholar]
  18. H. Cheng, Y. Yiu, Z. Li, Dynamics and control of redundantly actuated parallel manipulators, IEEE/ASME Trans. Mechatr. 8, 483–491 (2003) [CrossRef] [Google Scholar]
  19. Y. Lou, Z. Li, Y. Zhong, J. Li, Z. Li, Dynamics and contouring control of a 3-DoF parallel kinematics machine, Mechatronics 21, 215–226 (2011) [CrossRef] [Google Scholar]
  20. C. Gosselin, T. Schreiber, Redundancy in parallel mechanisms: a review, Appl. Mech. Rev. 70, 010802 (2018) [CrossRef] [Google Scholar]
  21. C. Cheng, H. Liao, Elastodynamics of a spatial redundantly actuated parallel mechanism constrained by two higher kinematic pairs, Meccanica 56, 515–533 (2021) [CrossRef] [MathSciNet] [Google Scholar]
  22. C. Cheng, B. Liu, Y. Li, Y. Wang, Elastodynamic performance of a spatial redundantly actuated parallel mechanism constrained by two point-contact higher kinematic pairs via a model reduction technique, Mech. Mach. Theory 167, 104570 (2022) [CrossRef] [Google Scholar]
  23. M. Mesnard, J. Coutant, M. Aoun, J. Morlier, M. Cid, P. Caix, Relationships between geometry and kinematic characteristics in the temporomandibular joint, Comput. Methods Biomech. Biomed. Eng. 15, 393–400 (2012) [CrossRef] [PubMed] [Google Scholar]
  24. J.H. Koolstra, Dynamics of the human masticatory system, Crit. Rev. Oral Biol. Med. 13, 366–376 (2002) [CrossRef] [PubMed] [Google Scholar]
  25. S. Siegler, R. Hayes, D. Nicolella, A. Fielding, A technique to investigate the three-dimensional kinesiology of the human temporomandibular joint, J. Prosthetic Dent. 65, 833–839 (1991) [CrossRef] [Google Scholar]
  26. L. Tsai, Mechanics of Serial and Parallel manipulators (John Wiley & Sons Inc, Canada, 1999) [Google Scholar]
  27. R. Abo-Shanab, Dynamic modeling of parallel manipulators based on Lagrange-D'Alembert formulation and Jacobian/Hessian matrices, Multibody Syst. Dyn. 48, 403–426 (2020) [CrossRef] [MathSciNet] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.