Open Access
Mechanics & Industry
Volume 24, 2023
Article Number 21
Number of page(s) 7
Published online 18 July 2023
  1. S. Abolfazl Zahedi, V. Babitsky, Modeling of autoresonant control of a parametrically excited screen machine, J. Sound Vib. 78–89, 380 (2016) [CrossRef] [Google Scholar]
  2. N. Zhen, Q. An, Analysis of stress and fatigue life of ball screw with considering the dimension errors of balls, Int. J. Mech. Sci. 137, 68–76 (2018) [CrossRef] [Google Scholar]
  3. J. Fleischer, A. Spohrer, U. Leberle, S. Dosch, Adaptive and adequate lubrication for highest component-lifetimes in feed drive axes with ball screws, Proc. CIRP 29, 335–340 (2015) [CrossRef] [Google Scholar]
  4. Q. Wu, F. Gu, A. Ball, H. Huang, Hybrid model for the analysis of the modal properties of a ball screw vibration system, J. Mech. Sci. Technol. 35, 461–467 (2021) [CrossRef] [Google Scholar]
  5. Y.J. Hu, Y. Wang, W. Zhu, H. Li, Dynamic modeling of a ball-screw drive and identification of its installation parameters, J. Dyn Syst. Measur. Control 143, 1–16 (2021) [Google Scholar]
  6. B.M. Iznairov, A.V. Korolev, A.A. Korolev, Improving the assembly of ball screws using analysis of interactions between the working parts, Proc. Eng. 150, 502–505 (2016) [CrossRef] [Google Scholar]
  7. T. Miura, A. Matsubara, D. Kono, K. Otaka, K. Hoshide, Design of high-precision ball screw based on small-ball concept, Precis. Eng. 47, 452–458 (2017) [CrossRef] [Google Scholar]
  8. K. Nakashima, K. Takafuji, Stiffness of a ball screw including the deformation of screw, nut and screw thread (1st report, single nut), Trans. Jpn. Soc. Mech. Eng. JSME Part C 54, 2181–2187 (1987) [Google Scholar]
  9. S. Verl Frey, T. Heinze, Double nut ball screw with improved operating characteristics, CIRP Ann. Manufactur. Technol. 63, 361–364 (2014) [CrossRef] [Google Scholar]
  10. B. Lin, C.E. Okwudire, J.S. Wou, Low order static load distribution model for ball screw mechanisms including effects of lateral deformation and geometric errors, J. Mech. Des. 140, 1–12 (2018) [Google Scholar]
  11. L.X. Zhou, P.Y. Li, Finite element analysis of the axial stiffness of a ball screw, IOP Conf. Ser. 372, 012023 (2018) [CrossRef] [Google Scholar]
  12. Y. Chen, W. Tang, Dynamic contact stiffness analysis of a double-nut ball screw based on a quasi-static method, Mech. Mach. Theory 73, 76–90 (2014) [CrossRef] [Google Scholar]
  13. X. Gao, X. Zhang, J. Yang, M. Wang, T. Zan, P. Gao, Lateral vibration control of ball screw feed system considering the nut location, J. Braz. Soc. Mech. Sci. Eng. 44, 226 (2022) [CrossRef] [Google Scholar]
  14. C. Zou, H. Zhang, D. Lu, J. Zhang, W. Zhao, Effect of the screw-nut joint stiffness on the position-dependent dynamics of a vertical ball screw feed system without counterweight, Proc. Inst. Mech. Eng. C 232, 2599–2609 (2018) [CrossRef] [Google Scholar]
  15. H. Zhang, H. Liu, C. Du, D. Lv, J. Zhang, W. Zhao, Dynamics analysis of a slender ball-screw feed system considering the changes of the worktable position, Proc. Inst. Mech. Eng. C 233, 2685–2695 (2019) [CrossRef] [Google Scholar]
  16. M. Wang, T. Zan, X. Gao, S. Li, Suppression of the time-varying vibration of ball screws induced from the continuous movement of the nut using multiple tuned mass dampers, Int. J. Mach. Tools Manufact. 107, 41–49 (2016) [CrossRef] [Google Scholar]
  17. M.F. Zaeh, T. Oertli, J. Milberg, Finite element modelling of ball screw feed drive systems, CIRP Ann. 53, 289–292 (2004) [CrossRef] [Google Scholar]
  18. Y. Hossein Khani, Control methods for improving tracking accuracy and disturbance rejection in ball screw feed drives, PhD thesis, University of Waterloo, 2013 [Google Scholar]
  19. M.F. Zaeh, T. Oertli, J. Milberg, Finite element modelling of ball screw feed drive systems, CIRP Ann. Manufactur. Technol. 53, 289–292 (2004) [CrossRef] [Google Scholar]
  20. Okwudire, Modeling and Control of High Speed Machine Tool Feed Drives, Ph.D. thesis, University of British Columbia, 2009 [Google Scholar]
  21. H. Chen, Analysis of the modal and stiffness characteristics of the ball screw pair, Thèse, Xi'an University of Technology, 2017 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.