EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 26 (2025) Mechanics & Industry, 26 (2025) 31 References
Open Access
Issue
Mechanics & Industry
Volume 26, 2025
Article Number 31
Number of page(s) 15
DOI https://doi.org/10.1051/meca/2025023
Published online 21 October 2025
  1. D. Dobrotă, S.G. Racz, M. Oleksik, I. Rotaru, M. Tomescu, C.M. Simion, Smart cutting tools used in the processing of aluminum alloys, Sensors 22, 28 (2021) [Google Scholar]
  2. B. Davoodi, A.H. Tazehkandi, Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid, J. Clean. Prod. 68, 234 (2014) [Google Scholar]
  3. A. Şahinoğlu, E. Ulas, An investigation of cutting parameters effect on sound level, surface roughness, and power consumption during machining of hardened AISI 4140, Mech. Ind. 21, 523 (2020) [Google Scholar]
  4. Z. Duan, C. Li, W. Ding, Y. Zhang, M. Yang, T. Gao, H.M. Ali, Milling force model for aviation aluminum alloy: academic insight and perspective analysis, Chin. J. Mech. Eng. 34, 1 (2021) [CrossRef] [Google Scholar]
  5. J. Marzbanrad, B. Mashadi, A. Afkar, S. Mahdavi, A Comparison between cutting and folding modes of an extruded aluminum alloy tube during impact using ductile failure criterion, Mech. Ind. 17, 208 (2016) [Google Scholar]
  6. B. Wang, Z. Liu, Q. Song, Y. Wan, Z. Shi, Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy, J. Clean. Prod. 129, 292 (2016) [Google Scholar]
  7. B. Umroh, The Optimum Cutting Condition when High Speed Turning of Aluminum Alloy using Uncoated Carbide, in: IOP Conf. Ser.: Mater. Sci. Eng., IOP Publishing, 505, 012041 (2019) [Google Scholar]
  8. P. Zhang, Z. Lin, Z. Liu, J. Liu, Q. Mai, X. Yue, Effect of cutting parameters on the microstructure evolution and damage mechanism of 7075-T6 aluminum alloy in micro cutting, Int. J. Damage Mech. 32, 914 (2023) [Google Scholar]
  9. X. Tong, Q. Qu, Optimizing the micro-texture and cutting parameters of ball-end milling cutters to achieve milling stability, Proc. Inst. Mech. Eng. E: J. Process Mech. Eng. 237, 326 (2023) [Google Scholar]
  10. S. Yang, C. Guo, W. Ren, Research on optimization of milling performance of V-groove micro-texture ball-end milling cutter, J. Mech. Sci. Technol. 36, 2849 (2022) [Google Scholar]
  11. Z. Wu, Y. Xing, J. Chen, Improving the performance of micro-textured cutting tools in dry milling of Ti-6Al-4V alloys, Micromachines 12, 945 (2021) [Google Scholar]
  12. Q. Li, S. Yang, Y. Zhang, Y. Zhou, J. Cui, Evaluation of the machinability of titanium alloy using a micro-textured ball end milling cutter, Int. J. Adv. Manuf. Technol. 98, 2083 (2018) [Google Scholar]
  13. Y. Zhang, H. Ji, Wear optimization of titanium alloy cutter milled with microtextured ball-end milling cutter, Adv. Mech. Eng. 12, 1687814019892102 (2020) [Google Scholar]
  14. N. Zhang, F. Yang, G. Liu, Cutting performance of micro-textured WC/Co tools in the dry cutting of Ti-6Al-4V alloy, Int. J. Adv. Manuf. Technol. 107, 3967 (2020) [Google Scholar]
  15. Q. Wang, Y. Yang, P. Yao, Z. Zhang, S. Yu, H. Zhu, C. Huang, Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser, Tribol. Int. 154, 106720 (2021) [Google Scholar]
  16. K. Patel, G. Liu, S.R. Shah, T. Özel, Effect of micro-textured tool parameters on forces, stresses, wear rate, and variable friction in titanium alloy machining, J. Manuf. Sci. Eng. 142, 021007 (2020) [Google Scholar]
  17. S.S. Akhtar, A critical review on self-lubricating ceramic-composite cutting tools, Ceram. Int. 47, 20745 (2021) [Google Scholar]
  18. Y. Xing, C. Luo, M. Zhu, Y. Zhao, K. Ehmann, Z. Wu, L. Liu, Assessment of self-lubricating coated cutting tools fabricated by laser additive manufacturing technology for friction-reduction, J. Mater. Process. Technol. 318, 118010 (2023) [Google Scholar]
  19. S. Wenlong, D. Jianxin, Z. Hui, Y. Pei, Z. Jun, A. Xing, Performance of a cemented carbide self-lubricating tool embedded with MoS2 solid lubricants in dry machining, J. Manuf. Processes 13, 8 (2011) [Google Scholar]
  20. S.H. Musavi, M. Sepehrikia, B. Davoodi, S.A. Niknam, Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughness, Int. J. Adv. Manuf. Technol. 120, 1 (2022) [Google Scholar]
  21. A. Şahinoğlu, Investigation of the effects of MQL and material hardness on energy consumption, vibration, and surface roughness in hard turning of AISI 52100 steel for a sustainable manufacturing, Proc. Inst. Mech. Eng. E: J. Process Mech. Eng. 239, 308 (2025) [Google Scholar]
  22. P. Zhang, Z. Li, H. Liu, Y. Zhang, H. Li, C. Shi, D. Yan, Recent progress on the microstructure and properties of high entropy alloy coatings prepared by laser processing technology: a review, J. Manuf. Processes 76, 397 (2022) [Google Scholar]
  23. P. Khatak, Laser cutting technique: a literature review, Mater. Today: Proc. 56, 2484 (2022) [Google Scholar]
  24. W. Zhao, X. Mei, L. Wang, Competitive mechanism of laser energy and pulses on holes ablation by femtosecond laser percussion drilling on AlN ceramics, Ceram. Int. 48, 36297 (2022) [Google Scholar]
  25. A. Rajurkar, S. Chinchanikar, Experimental investigation on laser-processed micro-dimple and micro-channel textured tools during turning of Inconel 718 alloy, J. Mater. Eng. Perform. 31, 1 (2022) [Google Scholar]
  26. K.E. Hazzan, M. Pacella, T.L. See, Laser processing of hard and ultra-hard materials for micro-machining and surface engineering applications, Micromachines 12, 895 (2021) [Google Scholar]
  27. Q. Huang, X. Shi, Y. Xue, K. Zhang, Y. Gao, C. Wu, Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel, Tribol. Int. 167, 107395 (2022) [Google Scholar]
  28. J.H. Ouyang, Y.F. Li, Y.Z. Zhang, Y.M. Wang, Y.J. Wang, High-temperature solid lubricants and self-lubricating composites: a critical review, Lubricants 10, 177 (2022) [Google Scholar]
  29. M. Sarkar, N. Mandal, Solid lubricant materials for high temperature application: a review, Mater. Today: Proc. 66, 3762 (2022) [Google Scholar]
  30. M.H. Hoghoughi, M. Farahnakian, S. Elhami, Environmental, economical, and machinability based sustainability assessment in hybrid machining process employing tool textures and solid lubricant, Sustain. Mater. Technol. 34, e00511 (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.