Mechanics & Industry

Open Access

Robust design optimization of dynamic and static manufacturing processes using the stochastic frontier model 1

Ali Trabelsi, Mohamed-Ali Rezgui, Marwan Amdouni, Atef Dokkar and Hamdi Jmal

Published online: 03 January 2025

DOI: https://doi.org/10.1051/meca/2024034

Open Access

Adaptive backstepping control for electro-hydraulic servo system in extension sleeve press-fitting process of bearing pressing machine 3

Hongsheng Chen

Published online: 27 January 2025

DOI: https://doi.org/10.1051/meca/2024038

Open Access

From single to multi-stage forming process of copper thin sheet 4

Amine Lagroum, Pierre-Yves Manach and Sandrine Thuillier

Published online: 27 January 2025

DOI: https://doi.org/10.1051/meca/2024039

Open Access

Dynamic analysis of crank slider mechanism considering 3D translational joint clearance based on variable contact area 5

Yuan Wang, Liu Juan, Ning Fengping, Chai Chao, Zhang Lei and Li Hui

Published online: 14 February 2025

DOI: https://doi.org/10.1051/meca/2025001

Open Access

On modelling of the one dimensional pseudoelastic effect of shape memory alloys 6

Imade Zidane and Belkacem Meddour

Published online: 18 February 2025

DOI: https://doi.org/10.1051/meca/2024040

Open Access

Empirical formulation for bead shape prediction in direct energy deposition 7

Gyeong-Yun Baek

Published online: 18 February 2025

DOI: https://doi.org/10.1051/meca/2024037

Open Access

Efficient transient dynamic analysis of a crane bridge subjected to shake table tests using non-linear substructuring 8

Sijia Li, Michael Brun and Anthony Gravouil

Published online: 28 February 2025

DOI: https://doi.org/10.1051/meca/2025003

Open Access

Parametric-modeling-based multi-objective thermoelastic optimization of rudder structures 9

Guanghui Shi, Yuhao Bao, Wenhua Wu, Guiqiang Guo, Ye Lin, Xiaopeng Zhang and Ran Tao

Published online: 28 February 2025

DOI: https://doi.org/10.1051/meca/2025002

Open Access

Green-FFT model for 3D contacts considering microstructure and defects 10

Lucas Fourel, Jean-Philippe Noyel, Xavier Kleber, Philippe Sainsot and Fabrice Ville

Published online: 12 March 2025

DOI: https://doi.org/10.1051/meca/2025004

Open Access

Bio-inspiration from the Issus Nymph gear − strength analysis 14

Bérengère Guilbert, Marie Winger, Jérôme Cavoret, Gregory Sutton, Richard Johnston and Fabrice Ville

Published online: 04 April 2025

DOI: https://doi.org/10.1051/meca/2025005

Open Access

Influence of Electric Cylinder Transmission Characteristics on Servo System 15

Yang Lei, Yuanqing Xia and Yiyang Huo

Published online: 08 April 2025

DOI: https://doi.org/10.1051/meca/2025010

Open Access

Development of an integrated engineering education model using multi-body closed system modeling, computational analysis, and signal processing analysis 16

Yonghu Park

Published online: 09 April 2025

DOI: https://doi.org/10.1051/meca/2024035

Open Access

Reliability assessment of multistate wind turbine gear train system based on T-S fuzzy fault tree and Bayesian network 17

Xiaowei Yin, Bingbing Jiao, Jiushen Liu and Huiwen Hu

Published online: 24 April 2025

DOI: https://doi.org/10.1051/meca/2025007

Open Access

Research on the motion trajectory control of industrial manipulators by the incremental PID control optimization algorithm 18

Jicai Wang and Fangyan Chen

Published online: 24 April 2025

DOI: https://doi.org/10.1051/meca/2025008

Open Access

Identification of key parameter influence on efficiency of chain drive for track cycling − Preliminary results 21

Gabriel Lanaspeze, Martin Best, Berengere Guilbert, Jérôme Cavoret, Arnaud Duval, Lionel Manin and Fabrice Ville

Published online: 09 June 2025

DOI: https://doi.org/10.1051/meca/2025013

Open Access

Analysis of the dynamic behavior of onboard rotors in non-linear regimes under the influence of parametric uncertainties 23

Thales R. B. Trevilato, Aldemir Ap Cavallini Jr and Valder Steffen Jr

Published online: 23 July 2025

DOI: https://doi.org/10.1051/meca/2025011

Open Access

Experimental analysis of the leakage characteristics of an oil cooled electric motor L-shaped lip seal in high-speed conditions 24

Thomas Valin, Erwan Fourt, Pierre Viot and Misa Milosavljevic

Published online: 05 August 2025

DOI: https://doi.org/10.1051/meca/2025016

Open Access

Failure analysis in disc shear based on Gissmo criterion 25

Kuan Xu, Ming-sheng Xia, Sai-juan Zhang, Qiu-yu Wang and Bagen Menggen

Published online: 05 August 2025

DOI: https://doi.org/10.1051/meca/2025015

Open Access

Research on the intelligent control system for lithium-ion aluminium shell power battery module stacking 26

Qingshan Sheng, Adisorn Sirikham, Jessada Konpang and Heng Wu

Published online: 01 September 2025

DOI: https://doi.org/10.1051/meca/2025018

Open Access

Simplified dynamic modeling methodology for parallel shaft gear transmission system 28

Jue Wang and Hang Zhou

Published online: 23 September 2025

DOI: https://doi.org/10.1051/meca/2025022

Open Access

The numerical simulation study of traction elevator steel belt model 29

Chen Li, Yuchao Hu, Cai Zhang, Feng Xu, Zecheng Zhou and Qinye Wang

Published online: 19 September 2025

DOI: https://doi.org/10.1051/meca/2025021

Open Access

Research on cutting performance of micro-texturing tools for cutting aluminum alloys 31

Tiantian Xu, Jinpeng Liu, Qingyu Guan, Wanting Zhao and Chunlu Ma

Published online: 21 October 2025

DOI: https://doi.org/10.1051/meca/2025023

Open Access

Numerical and experimental modelling of mechanical springs made of lattice material 33

Mathilde Serretiello, Manuel Paredes and Eduard Marenic

Published online: 31 October 2025

DOI: https://doi.org/10.1051/meca/2025026

Open Access

Agricultural tractors magneto-rheological seat suspension design based on LADRC control strategy 35

Bin Chen, Bo Guo, Luyang Zhou, Zhixiong Zheng, Jianjin Wu and Minghao Duan

Published online: 17 December 2025

DOI: https://doi.org/10.1051/meca/2025017

Open Access

Precision compensation technology of industrial robot based on OOA-DNN and transfer learning 37

Shuai Wang, Yuanbao Huang, Yongkang Mo and Jianwen Guo

Published online: 17 December 2025

DOI: https://doi.org/10.1051/meca/2025031

Open Access

Design and flow field characterization of safety valves based on the Laval principle 38

Lisong Wang, Zhuozhuo Qin, Hongguang Qi, Zengcheng Wang, Wenrui Jiang, Jiao Xu, Dameng Li and Xin Jin

Published online: 23 December 2025

DOI: https://doi.org/10.1051/meca/2025033

Mechanics & Industry

Volume 26 (2025)

Recent advances in vibrations, noise, and their use for machine monitoring

Experimental validation of the analytical modelling of a digitally created duffing acoustic nonlinear oscillator at low amplitudes 2

A multiple improved envelope spectra via feature optimization gram (MIESFO-gram) for diagnosis of compound fault signatures 12

Wavelet-based high order spectrum for local damage diagnosis of gears 13

Video-based operational modal analysis of slender mechanical structures with neutral axis estimation via barycenter calculation 20

Verifying hyperparameter sensitivities of optimal filter design methods for fault signature enhancement 22

Characteristics of pressure signal of oil pulsating flow based on wavelet analysis 36

Robotic Process Automation for Smarter Devices in Manufacturing

Order component extraction technology for predictive maintenance system in rotary machine 11

Perspective projection measurement method for rolling vibration test bench of locomotives and vehicles 19

The study on surface defect detection of stamped parts based on improved deep learning 27

A mathematical framework to study the mechanical and cellular activity in regulating the fracture healing process 30

Artificial Intelligence in Mechanical Manufacturing: From Machine Learning to Generative Pre-trained Transformer

Wind-resistant stability of bridges with three-force coefficients based on deep learning under mountain conditions 32

Double-layer planning model for supply chain service combination of high-end equipment manufacturing industry 34

Identification of bridge section flutter derivatives and numerical calculation of critical flutter wind speed based on deep learning 39

Robust design optimization of dynamic and static manufacturing processes using the stochastic frontier model 1

Adaptive backstepping control for electro-hydraulic servo system in extension sleeve press-fitting process of bearing pressing machine 3

From single to multi-stage forming process of copper thin sheet 4

Dynamic analysis of crank slider mechanism considering 3D translational joint clearance based on variable contact area 5

On modelling of the one dimensional pseudoelastic effect of shape memory alloys 6

Empirical formulation for bead shape prediction in direct energy deposition 7

Efficient transient dynamic analysis of a crane bridge subjected to shake table tests using non-linear substructuring 8

Parametric-modeling-based multi-objective thermoelastic optimization of rudder structures 9

Green-FFT model for 3D contacts considering microstructure and defects 10

Bio-inspiration from the Issus Nymph gear − strength analysis 14

Influence of Electric Cylinder Transmission Characteristics on Servo System 15

Development of an integrated engineering education model using multi-body closed system modeling, computational analysis, and signal processing analysis 16

Reliability assessment of multistate wind turbine gear train system based on T-S fuzzy fault tree and Bayesian network 17

Research on the motion trajectory control of industrial manipulators by the incremental PID control optimization algorithm 18

Identification of key parameter influence on efficiency of chain drive for track cycling − Preliminary results 21

Analysis of the dynamic behavior of onboard rotors in non-linear regimes under the influence of parametric uncertainties 23

Experimental analysis of the leakage characteristics of an oil cooled electric motor L-shaped lip seal in high-speed conditions 24

Failure analysis in disc shear based on Gissmo criterion 25

Research on the intelligent control system for lithium-ion aluminium shell power battery module stacking 26

Simplified dynamic modeling methodology for parallel shaft gear transmission system 28

The numerical simulation study of traction elevator steel belt model 29

Research on cutting performance of micro-texturing tools for cutting aluminum alloys 31

Numerical and experimental modelling of mechanical springs made of lattice material 33

Agricultural tractors magneto-rheological seat suspension design based on LADRC control strategy 35

Precision compensation technology of industrial robot based on OOA-DNN and transfer learning 37

Design and flow field characterization of safety valves based on the Laval principle 38