Open Access
| Issue |
Mechanics & Industry
Volume 16, Number 3, 2015
|
|
|---|---|---|
| Article Number | 308 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/meca/2015017 | |
| Published online | 21 April 2015 | |
- N. Nakajima, Numerical control for traditional manual forming of sheet metal, J. Japan Society Technol. Plasticity 23 (1979) 696–700 [Google Scholar]
- J. Allwood, H. Utsunomiya, A survey of flexible forming processes in Japan, Int. J. Mach. Tools Manuf. 46 (2006) l939–1960 [Google Scholar]
- G. Ambrogio, I. Costantino, L. De Napoli, L. Filice, L. Fratini, M. Muzzupappa, Influence of some relevant parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation, J. Mater. Process. Technol. 153 (2004) 153–154 [Google Scholar]
- F. Micari, G. Ambrogio, L. Filice, Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends, J. Mater. Process. Technol. 191 (2007) 390–395 [CrossRef] [Google Scholar]
- F. Han, J. Mo, H. Wei, R. Fen, X. Hui, Z. Wei, Spring back prediction for incremental sheet forming Based on FEM-PSONN technology, Trans. Nonferrous Metals Soc. China 23 (2013) 1061–1071 [Google Scholar]
- M. Ham, J. Jeswiet, Dimensional Accuracy Of Single point incremental forming, Int. J. Mater. Forming 1 (2008) 1171–1174 [CrossRef] [Google Scholar]
- A. Puzik, Incremental sheet forming with a robot system for an industrial application, 41st CIRP Conference on Manufacturing Systems, 2008 [Google Scholar]
- T. Schafer, R. Scraft, Incremental sheet metal forming by industrial robots, Rapid Prototyping J. 5 (2005) 278–286 [CrossRef] [Google Scholar]
- H. Tanaka, N. Asakawa, M. Hirao, Forming type rapid prototyping development – error compensation with shape measurement, J. Automation Technol. 2 (2008) 462–467 [Google Scholar]
- Y. Luo, K. He, R. Du, A new sheet metal forming system based on the incremental Punching, part 1: modeling and simulation, Int. J. Adv. Manuf. Technol. 51 (2010) 481–491 [CrossRef] [Google Scholar]
- G. Ambrogio, V. Cozza, L. Filice, F. Micari, An analytical model for improving precision in single point incremental forming, J. Mater. Process. Technol. 191 (2007) 92–95 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.