Open Access
Mechanics & Industry
Volume 17, Number 3, 2016
Article Number 303
Number of page(s) 16
Published online 08 February 2016
  1. E.O. Ezugwu, Key improvements in the machining of difficult-to-cut aerospace superalloys, Int. J. Machine Tools Manuf. 45 (2005) 1353–1367 [Google Scholar]
  2. R.E. Peterson, Stress concentration design factors, Wiley, New York, 1953 [Google Scholar]
  3. J. Liu, Z.F. Yue, Y.S. Liu, Surface finish of open holes on fatigue life, Theoret. Appl. Fracture Mech. 47 (2007) 35–45 [CrossRef] [Google Scholar]
  4. G.I. Taylor, The Mechanism of Plastic Deformation of Crystals. Part I, Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934, No. 362: 145, p. 855 [Google Scholar]
  5. M. Paredes, R. Canivenc, M. Sartor, Tolerance optimization by modification of Taguchi’s robust design approach and considering performance levels: Application to the design of a cold-expanded bushing, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2013 [Google Scholar]
  6. T. Benhaddou, P. Stephan, A. Daidié, C. Chirol, J-B. Tuery, Effect of Axial Preload on Double-Lap Bolted Joints: Numerical Study, Nantes: Proceedings of ASME 2012, 11th Biennial Conference On Engineering Systems Design And Analysis, 2012 [Google Scholar]
  7. M. Paredes, N. Naoufel, M. Sartor, Study of an interference fit fastener assembly by finite element modelling, analysis and experiment, Int. J. Interactive Design Manufact. 6 (2012) 171–177 [CrossRef] [Google Scholar]
  8. L.F. Reid, Advanced structural fastening and jointing methods utilizing synergistic cold expansion and high interference fit methodology, European Conference for Aerospace Sciences (EUCASS) [Google Scholar]
  9. A.C. Rufin, Extending the fatigue life of aircraft engine components by hole cold expansion technology, J. Eng. Gas Turbines Power 115 (1993) 165–171 [CrossRef] [Google Scholar]
  10. X. Zhang, Z. Wang, Fatigue life improvement in fatigue aged fastener holes using the cold expansion technique, Int. J. Fatigue 25 (2003) 1249–1257 [CrossRef] [Google Scholar]
  11. A.T. Ozdemir, R. Hermann, Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes, J. Mater. Sci. 34 (1999) 1243–1252 [CrossRef] [Google Scholar]
  12. L. Phillips Joseph, Technical Sleeve coldworking of fastener holes, Air Force Materials Laboratory (SAE Paper no. 73095), AFML-TR-74-10, 1974 [Google Scholar]
  13. D.L. Rich, L.F. Impellizzeri, Fatigue Analysis of Cold-worked and Interference Fit Fastener Holes/Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP (ASTM STP) 637 (1977) 153–175 [Google Scholar]
  14. G.T. Sha, B.A. Cowles, R.L. Fowler, Fatigue Life of a Coldworked hole, In Emerging technologies in aerospace structures, design structural dynamics and materials, by Jack R. Vinson. American Society of Mechanical Engineers. Aerospace Division, 1980, pp. 125–140 [Google Scholar]
  15. W.Z. Yan, X.S. Wang, H.S. Gao, Z.F. Yue, Effect of split sleeve cold expansion on cracking behaviors of titanium alloy TC4 holes, Eng. Fract. Mech. 88 (2012) 79–89 [CrossRef] [Google Scholar]
  16. J. Liu, H. Wu, J. Yang, Z. Yue, Effect of edge distance ratio on residual stresses induced by cold expansion and fatigue life of TC4 plates, Eng. Fract. Mech. 109 (2013) 130–137 [CrossRef] [Google Scholar]
  17. B.D. Flinn, M.E. Wiegman, M. Sigelmann, E. Easterbrook , A. Mines, StressWave fatigue life improvement of 6Al-4V titanium for medical implants, Proceedings of the materials and processes for medical devices conference, 2003 [Google Scholar]
  18. StressWave, Fatigue testing of 6Al-4V titanium, 2001 [Google Scholar]
  19. E.-L. Odenbergera, M. Oldenburgb, P. Thilderkvista, T. Stoehrc, J. Lechlerc, M. Merklein, Tool development based on modelling and simulation of hot sheet metal forming of Ti-6Al-4V titanium alloy, J. Mater. Process. Technol. 211 (2011) 1324–1335 [CrossRef] [Google Scholar]
  20. J.R. Mayeur, D.L. McDowell, A three-dimensional crystal plasticity model for duplex Ti-6Al-4V, Int. J. Plasticity 23 (2007) 1457–1485 [CrossRef] [Google Scholar]
  21. J.A. Medina Perilla, J.Gil. Sevillano, Two-dimensional sections of the yield locus of a Ti-6%Al-4%V alloy with a strong transverse-type crystallographic a-texture, Materials Science and Engineering, 1995 [Google Scholar]
  22. S. Khan Akhtar, Yu. Shaojuan, Deformation induced anisotropic responses of Ti-6Al-4V alloy Part I: Experiments, Int. J. Plasticity, 2012 [Google Scholar]
  23. E.W. Collings, Applied superconductivity, metallurgy, and physics of titanium alloys, Plenum Press, New York, 1986 [Google Scholar]
  24. T.N. Charkherlou, J. Vogwell, The effect of cold expansion on improving the fatigue life of fastener holes, J. Eng. Failure Anal. 10 (2003) 13–24 [CrossRef] [Google Scholar]
  25. V. Nigrelli, S. Pasta, Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes, J. Materi. Process. Technol. 205 (2008) 290–296 [Google Scholar]
  26. E.T. Easterbrook, M.A. Landy, Evaluation of the StressWave cold working (SWCW) process on high strength aluminium alloys for aerospace, AIR FORCE RESEARCH LABORATORY AFRL-RX-WP-TR-2009-4027, 2009 [Google Scholar]
  27. T.N. Charkherlou, J. Vogwell, A novel method of cold expansion which creates near-uniform compressive tangential residual stress around a fastener hole, Fatigue Fract. Eng. Mater. Struct. 27 (2004) 343–351 [CrossRef] [Google Scholar]
  28. L. Boni, A. Lanciotti, C. Polese, Some contraindications of hole expansion in riveted joints, Eng. Failure Anal. 46 (2014) 140–156 [CrossRef] [Google Scholar]
  29. M.E. Karabin, F. Barlat, R.W. Schultz, Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve, J. Mater. Process. Technol. 189 (2007) 45–57 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.