Mechanics & Industry

Open Access

Modelling kinematics and cutting forces in vibration assisted drilling 301

John Le Dref, Yann Landon, Gilles Dessein and Christine Espinosa

Published online: 18 February 2016

DOI: https://doi.org/10.1051/meca/2015078

• Abstract
• PDF (1.234 MB)
• References

Open Access

Coupled radiation and natural convection within an inclined sinusoidal solar collector heated from below 302

Djamel Sadaoui, Adel Sahi, Abderrahmane Djerrada and Kacem Mansouri

Published online: 08 February 2016

DOI: https://doi.org/10.1051/meca/2015060

• Abstract
• PDF (1.234 MB)
• References

Open Access

Cold expansion process on hard alloy holes-experimental and numerical evaluation 303

Victor Achard, Alain Daidie, Manuel Paredes and Clément Chirol

Published online: 08 February 2016

DOI: https://doi.org/10.1051/meca/2015075

• Abstract
• PDF (2.807 MB)
• References

Open Access

Herschel-Bulkley fluid flow within a pipe by taking into account viscous dissipation 304

Nabila Labsi and Youb Khaled Benkahla

Published online: 08 February 2016

DOI: https://doi.org/10.1051/meca/2015063

• Abstract
• PDF (2.932 MB)
• References

Open Access

Bearing monitoring in variable speed regime using normalized indicators 305

Khalid Ait Sghir, Olivier Cousinard, Fabrice Bolaers, Philippe Estocq and Jean Paul Dron

Published online: 08 February 2016

DOI: https://doi.org/10.1051/meca/2015087

• Abstract
• PDF (935.8 KB)
• References

Open Access

Lifetime prediction of a viscoplastic lead-free solder in power electronics modules under passive temperature cycling 306

Z. Sun, L. Benabou and P. Dahoo

Published online: 18 February 2016

DOI: https://doi.org/10.1051/meca/2015080

• Abstract
• PDF (1.199 MB)
• References

Open Access

Implementation of artificial neural-networks to model the performance parameters of Stirling engine 307

Seyed Abbas Sadatsakkak, Mohammad H. Ahmadi and Mohammad Ali Ahmadi

Published online: 15 February 2016

DOI: https://doi.org/10.1051/meca/2015062

• Abstract
• PDF (1.100 MB)
• References

Open Access

Bearing fault diagnosis using Hilbert-Huang transform (HHT) and support vector machine (SVM) 308

Aida Kabla and Karim Mokrani

Published online: 15 February 2016

DOI: https://doi.org/10.1051/meca/2015067

• Abstract
• PDF (1.180 MB)
• References

Open Access

Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel 309

Mohamed Elbah, Hamdi Aouici, Ikhas Meddour, Mohamed Athmane Yallese and Lakhdar Boulanouar

Published online: 15 February 2016

DOI: https://doi.org/10.1051/meca/2015076

• Abstract
• PDF (880.6 KB)
• References

Open Access

New fatigue limit assessment approach of defective material under fully reversed tension and torsion loading 310

Hassine Wannes, Anouar Nasr and Chokri Bouraoui

Published online: 15 February 2016

DOI: https://doi.org/10.1051/meca/2015064

• Abstract
• PDF (1.976 MB)
• References

Open Access

On the validity of a numerical model predicting heat and mass transfer in porous square cavities with a bottom thermal and solute source: case of pollutants spreading and fuel leaks 311

Karim Ragui, Abdelkader Boutra and Youb Khaled Benkahla

Published online: 29 February 2016

DOI: https://doi.org/10.1051/meca/2015109

• Abstract
• PDF (2.811 MB)
• References