Issue
Mechanics & Industry
Volume 18, Number 7, 2017
STANKIN: Innovative manufacturing methods, measurements and materials
Article Number 711
Number of page(s) 8
DOI https://doi.org/10.1051/meca/2017066
Published online 30 December 2017
  1. S.N. Grigoriev, Yu. A. Melnik, A.S. Metel, M.A. Volosova, Focused beams of fast neutral atoms in glow discharge plasma editors-pick, J. Appl. Phys. 121 (2017) 223302 [CrossRef] [Google Scholar]
  2. S.N. Grigoriev, T.V. Tarasova, Possibilities of the technology of additive production for making complex-shape parts and depositing functional coatings from metallic powders, Metal Sci Heat Treatment 57 (2016) 579–584 [CrossRef] [Google Scholar]
  3. O.R. Hachkevych, B.D. Drobenko, P.I. Vankevych, M. Yu. Yakovlev, Optimization of the high-temperature induction treatment modes for nonlinear electroconductive bodies, Strength Mater. 49 (2017) 429–435 [CrossRef] [Google Scholar]
  4. I. Smurov, M. Doubenskaia, S. Grigoriev, A. Nazarov, Optical Monitoring in Laser Cladding of Ti6Al4V, J. Thermal Spray Technol 21 (2012) 1357–1362 [CrossRef] [Google Scholar]
  5. S.V. Fedorov, A.A. Okunkova, N.Y. Peretyagin, P.Y. Peretyagin, Electroconductive graphene-hydroxyapatite PVD targets for magnetron sputtering, Izv. vyshih uchebnyh zaved. Fiz. 59 (2016) 192–194. [Google Scholar]
  6. M.M. Stebulyanin, A.A. Gurkina, A.A. Shein, N.Y. Cherkasova, Measuring adhesive bond strength and microhardness of multilayer composite wear-resistant coating, Mechanics & Industry 17 (2016) 712. [CrossRef] [EDP Sciences] [Google Scholar]
  7. Q.M. Mehran, M.A. Fazal, A.R. Bushroa, S. Rubaiee, A Critical Review on Physical Vapor Deposition Coatings Applied on Different Engine Components, Crit. Rev. Solid State Mater. Sciences (2017) 1–18 [Google Scholar]
  8. W.C. Guo, G. Rauchs, L. Papeleux, W.-H. Zhang, F. Gitzhofer, J.-P. Ponthot, Evaluation of the mechanical properties of plasma-sprayed coating by nanoindentation technology, Mechanics & Industry 13 (2012) 151–162 [CrossRef] [EDP Sciences] [Google Scholar]
  9. J. Zhang, Zh. Wang, M. Li, Z. Wang, T. Li, Zh. Wang, Evaluation of adhesion and mechanical properties of plasma sprayed NiCrAl/Al2O3-13wt.%TiO2 coatings, J. Adhes. Sci. Technol. (2017) 1–15 [Google Scholar]
  10. S. Atlati, A. Moufki, M. Nouari, B. Haddag, Interaction between the local tribological conditions at the tool–chip interface and the thermomechanical process in the primary shear zone when dry machining the aluminum alloy AA2024–T351, Tribol. Int. 105 (2017) 326–333 [CrossRef] [Google Scholar]
  11. M.S.I. Chowdhury, S. Chowdhury, K. Yamamoto, B.D. Beake, B. Bose, A. Elfizy, D. Cavelli, G. Dosbaeva, M. Aramesh, G.S. Fox-Rabinovich, S.C. Veldhuis, Wear behaviour of coated carbide tools during machining of Ti6Al4V aerospace alloy associated with strong built up edge formation, Surf. Coat. Technol. 313 (2017) 319–327 [CrossRef] [Google Scholar]
  12. Z. Pan, Y. Feng, S.Y. Liang, Material microstructure 393 affected machining: a review, Manufacturing Rev. 4 (2017) 5 [CrossRef] [EDP Sciences] [Google Scholar]
  13. M. Azadi, A.S. Rouhaghdam, S. Ahangarani, Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C, N) Multicomponent Coatings Produced by PACVD, Strength Mater. 8 (2016) 279–289 [CrossRef] [Google Scholar]
  14. V.V. Kuzin, M. Yu. Fedorov, M.A. Volosova, Nitride ceramic surface layer stressed state transformation with a change in TiC-coating thickness. Stress − distributed force load version. Refract. Ind. Ceram. 57 (2017) 551–556 [CrossRef] [Google Scholar]
  15. S.N. Grigoriev, Study of cutting properties and wear pattern of carbide tools with comprehensive chemical-thermal treatment and nano-structured/gradient wear-resistant coatings, Mechanics & Industry. 17 (2016) 702 [CrossRef] [EDP Sciences] [Google Scholar]
  16. S.N. Grigoriev, A.S. Metel, M.A. Volosova, Y.A. Melnik, Surface hardening by means of plasma immersion ion implantation and nitriding in glow discharge with electrostatic confinement of electrons, Mechanics & Industry 16 (2015) 711 [CrossRef] [EDP Sciences] [Google Scholar]
  17. J. Tomastik, R. Ctvrtlik, Nanoscratch test − a tool for evaluation of cohesive and adhesive properties of thin films and coatings, EPJ Web Conf. 48 (2013) 00027 [CrossRef] [Google Scholar]
  18. M.M. Quazi, M. Ishak, A. Arslan, M. Nasir Bashir, I. Ali, Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy, J. Adhes. Sci. Technol. 32 (2018) 625–641 [CrossRef] [Google Scholar]
  19. A.F.A. Trompeta, E.P. Koumoulos, I.A. Kartsonakis, C.A. Charitidis, Advanced characterization of by-product carbon film obtained by thermal chemical vapor deposition during CNT manufacturing, Manufacturing Rev. 4 (2017) 7 [CrossRef] [Google Scholar]
  20. E.V. Berlin, N.N. Koval, L.A. Seidman, Plasma thermochemical surface treatment of steel parts, Technosphera, Мoscow, 2012 (in Russian). [Google Scholar]
  21. Yu.F. Ivanov, A.D. Teresov, E.A. Petrikova, O.V. Krysina, et al., Surface Alloying of SUS 321 Chromium-Nickel Steel by an Electron-Plasma Process, Russ. Phys. J. 60 (2017) 515–521 [CrossRef] [Google Scholar]
  22. Y. Li, Z. Han, Y. Chen, Research on Ultrasonic Testing Methods for Adhesion Quality of Ceramic Coatings, MATEC Web Conf. 114 (2017) 02001 [CrossRef] [Google Scholar]
  23. M.A. Volosova, S.N. Grigoriev, E.A. Ostrikov, Use of laser ablation for formation of discontinuous (discrete) wear-resistant coatings formed on solid carbide cutting tool by electron beam alloying and vacuum-arc deposition, Mechanics & Industry 17 (2016) 720 [CrossRef] [EDP Sciences] [Google Scholar]
  24. V. Diciuc, A. Kazek-Kesik, The structure and formation of functional hard coatings: a short review, MATEC Web Conf. 112 (2017) 04008 [CrossRef] [Google Scholar]
  25. S.N. Grigor'ev, S.V. Fedorov, M.D. Pavlov et al. Complex surface modification of carbide tool by Nb + Hf + Ti alloying followed by hardfacing (Ti + Al)N, J. Frict. Wear 34 (2013) 14–18 [CrossRef] [Google Scholar]
  26. Patent of RF No. 2015110428, Method of chemical-thermal treatment of product (Sposob himiko-termicheskoi obrabotki izdeliya) [Google Scholar]
  27. S.N. Grigoriev, S.V. Fedorov, Tool material surface alloying by wide-aperture low-energy high-current electron beam treatment before wear-resistant coating, Mechanics & Industry 16 (2015) 708 [CrossRef] [EDP Sciences] [Google Scholar]
  28. Y. Tan, F. Xi, Sh. Li, Z. Zhou, Pulse shape effects on the dynamic response of a steel beam under combined action of fire and explosionloads, J. Constr. Steel Res. 139 (2017) 484–492 [CrossRef] [Google Scholar]
  29. E.A. Levashov, A S. Mukasyan, A.S. Rogachev, D.V. Shtansky. Self-propagating high-temperature synthesis of advanced materials and coatings, Int. Mater. Rev. 62 (2017) 203–239 [CrossRef] [Google Scholar]
  30. A.S. Rogachev, S.G. Vadchenko, F. Baras, O. Politano, S. Rouvimov, et al., Combustion in reactive multilayer Ni/Al nanofoils: experiments and molecular dynamic simulation, Combust. Flame 166 (2016) 158–169 [CrossRef] [Google Scholar]
  31. X. Cui, J. Guo, Effects of cutting parameters on tool temperatures in intermittent turning with the formation of serrated chip considered, Appl. Thermal Eng. 110 (2017) 1220–1229 [CrossRef] [Google Scholar]
  32. J. Mu, J. Wang, Z. Zhao, Zh. Zhu, Ya. Wang, Regulating kinetics of deformation-induced phase transformation in amorphous alloy composite via tuning nano-scale compositional heterogeneity in crystalline phase, Intermetallics 93 (2017) 72–76 [CrossRef] [Google Scholar]
  33. V.N. Gavrin, Yu.P. Kozlova, E.P. Veretenkin, A.V. Logachev, A.I. Logacheva, et al., Reactor target from metal chromium for “pure” high-intensive artificial neutrino source, Phys. Part. Nucl. Lett. 13 (2016) 267–273 [CrossRef] [Google Scholar]
  34. S.N. Grigoriev, A.S. Metel, S.V. Fedorov, Modification of the structure and properties of high-speed steel by combined vacuum-plasma treatment, Metal Sci. Heat Treat. 54 (2012) 8–12 [CrossRef] [Google Scholar]
  35. S.N. Grigoriev, Study of cutting properties and wear pattern of carbide tools with comprehensive chemical-thermal treatment and nano-structured/gradient wear-resistant coatings, Mechanics & Industry 17 (2016) 702 [CrossRef] [EDP Sciences] [Google Scholar]
  36. V.V. Kuzin, M.Yu. Fedorov, M.A. Volosova, Nitride ceramic surface layer stressed state transformation with a change in TiC-coating thickness. Stress version − heat flow, Refract. Ind. Ceram. 58 (2017) 82–88 [CrossRef] [Google Scholar]
  37. B. Karpuschewski, J. Kundrak, T. Emmer, D. Borysenko, A New Strategy in Face Milling − Inverse Cutting Technology, Solid State Phenom. 261 (2017) 331–338 [CrossRef] [Google Scholar]
  38. M. Rief, B. Karpuschewski, E. Kalhöfer, Evaluation and modeling of the energy demand during machining, CIRP J. Manuf. Sci. Technol. 19 (2017) 62–71 [Google Scholar]
  39. Ya. Wang, Zh. Yin, G. Gao, X. Zhang, Analysis of the performance of worn hydrodynamic water-lubricated plain journal bearings considering cavitation and elastic deformation, Mechanics & Industry 18 (2017) 508 [CrossRef] [EDP Sciences] [Google Scholar]
  40. L. Meisner, A. Markov, V. P. Rotshtein, et al., Microstructural characterization of Ti-Ta-based surface alloy fabricated on TiNi SMA by additive pulsed electron-beam melting of film/substrate system, J. Alloy. Compd. 730 (2017) 376–385 [CrossRef] [Google Scholar]
  41. A.B. Markov, E. V. Yakovlev, V. I. Petrov, Formation of surface alloys with a low-energy high-current electron beam for improving high-voltage hold-off of copper electrodes, IEEE Trans. Plasma Sci. 41 (2013) 2177–2182 [CrossRef] [Google Scholar]
  42. J. Cai, P. Lv, C.L. Zhang, J. Wu, Q.F. Guan, Microstructure and properties of low carbon steel after surface alloying induced by high current pulsedelectron beam, Nuclear Inst. Methods Phys. Res. Section B: Beam Interact. Mater. Atoms 410 (2017) 47–52 [CrossRef] [Google Scholar]
  43. S.V. Fedorov, M.D. Pavlov, A.A. Okunkova, Effect of structural and phase transformations in alloyed subsurface layer of hard-alloy tools on their wear resistance during cutting of high-temperature alloys, J. Frict. Wear Vol. 34 (2013) 190–198 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.