Mechanics & Industry

Open Access

Editorial

Current state of the development of MSTU “STANKIN” and department of High-Efficiency Processing Technologies of Materials 701

S.N. Grigoriev

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2018002

Open Access

Estimation of process capability indices from the results of limit gauge inspection of dimensional parameters in machining industry 702

Dmitry A. Masterenko and Alexander S. Metel

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017054

Open Access

Comparative evaluation of methods for the determination of heat transfer coefficients of liquid and gaseous quenching media 703

Svetlana Yu. Shevchenko, Yury A. Melnik, Andrey E. Smirnov and Wai Yan Min Htet

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017050

Open Access

D-shell of iron atom of the amorphous FeCr₁₅B₁₅ alloy effective charge change during the crystallization 704

Nikolay O. Khmelevsky, Yuriy V. Funtikov, Anatoliy Yu. Aksenenko, Olga V. Ilyukhina and Alexander S. Metel

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017062

Open Access

Two-component end mills with multilayer composite nano-structured coatings as a viable alternative to monolithic carbide end mills 705

Alexey Vereschaka, Boris Mokritskii, Elena Mokritskaya, Oleg Sharipov and Maksim Oganyan

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017052

Open Access

Multilayer composition coatings for cutting tools: formation and performance properties 706

Vladimir P. Tabakov, Anatoly S. Vereschaka and Alexey A. Vereschaka

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017063

Open Access

Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI 707

Alexey Vereschaka, Mars Migranov, Gaik Oganyan, Catherine S. Sotova and Andre Batako

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017060

Open Access

Compression of pulsed electron beams for material tests 708

Alexander S. Metel

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017051

Open Access

A new method for production of titanium vapor and synthesis of titanium nitride coatings 709

Sergey N. Grigoriev, Yury A. Melnik, Alexander S. Metel and Marina A. Volosova

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017055

Open Access

Wear of carbide inserts with complex surface treatment when milling nickel alloy 710

Sergey Fedorov, Min Htet Swe, Alexey Kapitanov and Sergey Egorov

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017053

Open Access

Comprehensive surface treatment of high-speed steel tool 711

Sergey V. Fedorov, Sergey V. Aleshin, Min Htet Swe, Raushan D. Abdirova, Alexey V. Kapitanov and Sergey B. Egorov

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017066

Open Access

Cutting velocity accuracy as a criterion for comparing robot trajectories and manual movements for medical industry 712

A.A. Vorotnikov, D.D. Klimov, E.V. Romash, O.S. Bashevskaya, Yu. V. Poduraev, E.A. Bazykyan and A.A. Chunihin

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017047

Open Access

Nanoscale surface characterization using laser interference microscopy 713

Pavel S. Ignatyev, Andrey A. Skrynnik and Yury A. Melnik

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017058

Open Access

Phase composition and microstructure of WC–Co alloys obtained by selective laser melting 714

Roman S. Khmyrov, Alexandr P. Shevchukov, Andrey V. Gusarov and Tatyana V. Tarasova

Published online: 30 December 2017

DOI: https://doi.org/10.1051/meca/2017059

Mechanics & Industry

Volume 18 / No 7 (2017) Supplement

STANKIN: Innovative manufacturing methods, measurements and materials
Sergey N. Grigoriev (Guest Editor)

STANKIN: Innovative manufacturing methods, measurements and materials

Current state of the development of MSTU “STANKIN” and department of High-Efficiency Processing Technologies of Materials 701

Estimation of process capability indices from the results of limit gauge inspection of dimensional parameters in machining industry 702

Comparative evaluation of methods for the determination of heat transfer coefficients of liquid and gaseous quenching media 703

D-shell of iron atom of the amorphous FeCr₁₅B₁₅ alloy effective charge change during the crystallization 704

Two-component end mills with multilayer composite nano-structured coatings as a viable alternative to monolithic carbide end mills 705

Multilayer composition coatings for cutting tools: formation and performance properties 706

Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI 707

Compression of pulsed electron beams for material tests 708

A new method for production of titanium vapor and synthesis of titanium nitride coatings 709

Wear of carbide inserts with complex surface treatment when milling nickel alloy 710

Comprehensive surface treatment of high-speed steel tool 711

Cutting velocity accuracy as a criterion for comparing robot trajectories and manual movements for medical industry 712

Nanoscale surface characterization using laser interference microscopy 713

Phase composition and microstructure of WC–Co alloys obtained by selective laser melting 714

Mechanics & Industry

Volume 18 / No 7 (2017) Supplement

STANKIN: Innovative manufacturing methods, measurements and materials Sergey N. Grigoriev (Guest Editor)

STANKIN: Innovative manufacturing methods, measurements and materials

Current state of the development of MSTU “STANKIN” and department of High-Efficiency Processing Technologies of Materials 701

Estimation of process capability indices from the results of limit gauge inspection of dimensional parameters in machining industry 702

Comparative evaluation of methods for the determination of heat transfer coefficients of liquid and gaseous quenching media 703

D-shell of iron atom of the amorphous FeCr15B15 alloy effective charge change during the crystallization 704

Two-component end mills with multilayer composite nano-structured coatings as a viable alternative to monolithic carbide end mills 705

Multilayer composition coatings for cutting tools: formation and performance properties 706

Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI 707

Compression of pulsed electron beams for material tests 708

A new method for production of titanium vapor and synthesis of titanium nitride coatings 709

Wear of carbide inserts with complex surface treatment when milling nickel alloy 710

Comprehensive surface treatment of high-speed steel tool 711

Cutting velocity accuracy as a criterion for comparing robot trajectories and manual movements for medical industry 712

Nanoscale surface characterization using laser interference microscopy 713

Phase composition and microstructure of WC–Co alloys obtained by selective laser melting 714

STANKIN: Innovative manufacturing methods, measurements and materials
Sergey N. Grigoriev (Guest Editor)

D-shell of iron atom of the amorphous FeCr₁₅B₁₅ alloy effective charge change during the crystallization 704