Issue
Mechanics & Industry
Volume 19, Number 7, 2018
STANKIN: High-efficiency machining of innovative materials
Article Number 704
Number of page(s) 18
DOI https://doi.org/10.1051/meca/2019008
Published online 08 April 2019
  1. H. Meier, K. Ninomiya, D. Dornfeld, V. Schulze, Hard broaching of case hardened SAE 5120, Proc. CIRP 14 (2014) 60–65 [CrossRef] [Google Scholar]
  2. P.N. Filatov, Influence of ionic-plasma hardening on the performance of broaches in machining high-temperature nickel alloys, Russ. Eng. Res. 29 (2009) 732–734 [CrossRef] [Google Scholar]
  3. A. Hosseini, H.A. Kishawy, On the optimized design of broaching tools, J. Manuf. Sci. Eng. 136 (2014) 011011 [CrossRef] [Google Scholar]
  4. A. Katz, K. Erkorkmaz, F. Ismail, Virtual model of gear shaping-Part I: kinematics, cutter-workpiece engagement, and cutting forces, J. Manuf. Sci. Eng. 140 (2018) 071007 [CrossRef] [Google Scholar]
  5. M. Braic, V. Braic, M. Balaceanu, A. Vladescu, C.N. Zoita, C.P. Lungu, C.E.A. Grigorescu, E. Grigore, C. Logoftu, (Ti,Cr,Nb)CN coatings deposited on nitrided high-speed steel by cathodic arc method, Surf. Coat. Technol. 205 (2011) 209–213 [CrossRef] [Google Scholar]
  6. M. Lamraoui, M. El Badaoui, F. Guilleti, Chatter stability prediction for CNC machine tool in operating condition through operational modal analysis, Mech. Ind. 17 (2016) 402 [CrossRef] [Google Scholar]
  7. A. Metel, M. Volosova, S. Grigoriev, Yu. Melnik, Products pre-treatment and beam-assisted deposition of magnetron sputtered coatings using a closed cylindrical grid inside a planetary rotation system, Surf. Coat. Technol. 325 (2017) 327–332 [CrossRef] [Google Scholar]
  8. V. Yu. Fominski, S.N. Grigoriev, A.G. Gnedovets et al., Pulsed laser deposition of composite Mo-Se-Ni-C coatings using standard and shadow mask configuration, Surf. Coat. Technol. 206 (2012) 5046–5054 [CrossRef] [Google Scholar]
  9. E.A. Levashov, A.S. Mukasyan, A.S. Rogachev, D.V. Shtansky. Self-propagating high-temperature synthesis of advanced materials and coatings, Int. Mater. Rev. 62 (2017) 203–239 [Google Scholar]
  10. M. Azadi, A.S. Rouhaghdam, S. Ahangarani, Mechanical behavior of TiN/TiC-n multilayer coatings and Ti(C, N) multicomponent coatings produced by PACVD, Strength Mater. 8 (2016) 279–289 [CrossRef] [Google Scholar]
  11. M. Volosova, S. Grigoriev, A. Metel, A. Shein, The role of thin-film vacuum-plasma coatings and their influence on the efficiency of ceramic cutting inserts, Coatings 8 (2018) 287 [CrossRef] [Google Scholar]
  12. O.V. Sobol', A.A. Andreev, S.N. Grigoriev, M.A. Volosov, V.F. Gorban', Vacuum-arc multilayer nanostructured TiN/Ti coatings: structure, stress state, properties, Met. Sci. Heat Treat. 54 (2012) 28–33 [CrossRef] [Google Scholar]
  13. K. Mughal, M. Saleem, M. Pervez Mughal, Performance evaluation of nano-composite ceramic-coated high-speed steel (HSS) drills in high-speed machining, Int. J. Adv. Manuf. Technol. 96 (2018) 4195–4203 [CrossRef] [Google Scholar]
  14. M. Sahin, C. Misirli, D. Özkan, Characteristic properties of AlTiN and TiN coated HSS materials, Ind. Lubr. Tribol. 67 (2015) 172–180 [CrossRef] [Google Scholar]
  15. V.V. Kuzin, M. Yu. Fedorov, M.A. Volosova, Nitride ceramic surface layer stressed state transformation with a change in TiC-coating thickness. Stress − distributed force load version, Refract. Ind. Ceram. 57 (2017) 551–556 [CrossRef] [Google Scholar]
  16. M.A. Volosova, S.N. Grigoriev, E.A. Ostrikov, Use of laser ablation for formation of discontinuous (discrete) wear-resistant coatings formed on solid carbide cutting tool by electron beam alloying and vacuum-arc deposition, Mech. Ind. 17 (2016) 720 [CrossRef] [EDP Sciences] [Google Scholar]
  17. S.N. Grigoriev, A.S. Metel, S.V. Fedorov, Modification of the structure and properties of high-speed steel by combined vacuum-plasma treatment, Met. Sci. Heat Treat. 54 (2012) 8–12 [CrossRef] [Google Scholar]
  18. W. Wu, W. Chen, S. Yang, Y. Lin, S. Zhang, T.Y. Cho, G.H. Lee, S.C. Kwon, Design of AlCrSiN multilayer and nanocomposite coating for HSS cutting tools, Appl. Surf. Sci. 351 (2015) 803–810 [CrossRef] [Google Scholar]
  19. C. Tritremmel, R. Daniel, M. Lechthaler, P. Polcik, C. Mitterer, Influence of Al and Si content on structure and mechanical properties of arc evaporated Al-Cr-Si-N thin films, Thin Solid Films 534 (2013) 403–409 [CrossRef] [Google Scholar]
  20. L.F. Zagonel, E. J. Mittemeijer, F. Alvarez, Microstructure of tool steel after low temperature ion nitriding, Mater. Sci. Technol. 25 (2009) 726–732 [CrossRef] [Google Scholar]
  21. T. Aiso, U. Wiklund, M. Kubota, S. Jacobson, Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool, Tribol. Int. 101 (2016) 414–424 [CrossRef] [Google Scholar]
  22. P. Saikia, A. Joseph, R. Rane, B.K. Saikia, S. Mukherjee, Role of substrate and deposition conditions on the texture evolution of titanium nitride thin film on bare and plasma-nitrided high-speed steel, J. Theor. Appl. Phys. 66 (2013) 1–12 [Google Scholar]
  23. M.K. Skakov, B.K. Rakhadilov, M. Sheffler, Modification of structure and properties of steel R6M5 at electrolyte plasma treatment, Adv. Mater. Res. 601 (2013) 64–68 [CrossRef] [Google Scholar]
  24. A.F. Rousseau, J.G. Partridge, E.L.H. Mayes, J.T. Toton, M. Kracica, D.G. McCulloch, E.D. Doyle, Microstructural and tribological characterisation of a nitriding/TiAlN PVD coating duplex treatment applied to M2 High Speed Steel tools, Surf. Coat. Technol. 272 (2015) 403–408 [CrossRef] [Google Scholar]
  25. B. Miao, Y. Chai, K. Wei, J. Hu, A novel duplex plasma treatment combining plasma nitrocarburizing and plasma nitriding, Vacuum 133 (2016) 54–57 [CrossRef] [Google Scholar]
  26. A. Nishimoto, H. Nii, R. Narita, K. Akamatsu, Simultaneous duplex process of TiN coating and nitriding by active screen plasma nitriding, Surf. Coat. Technol. 228 (2012) 558–562 [CrossRef] [Google Scholar]
  27. E.D. Doyle, A. Pagon, P. Hubbard, S. Dowey, A. Pilkington, D. McCulloch, K. Latham, J. DuPlessis, Nitriding of high speed steel, Int. Heat Treat. Surf. Eng. 5 (2011) 69–72 [CrossRef] [Google Scholar]
  28. R. Rodriguez-Baracada, J.A. Benito, E.S. Puchi-Cabrera, M.H. Staia, High temperature wear resistance of (TiAI)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments, Wear 262 (2007) 380–389 [CrossRef] [Google Scholar]
  29. F. Hakami, A. Pramanik, A.K. Basak, Duplex surface treatment of steels by nitriding and chromizing, Aust. J. Mech. Eng. 15 (2017) 55–72 [CrossRef] [Google Scholar]
  30. A.F. Rousseau, J.G. Partridge, Y.M. Goezuekara et al., Carbon evolution during vacuum heat treatment of high speed steel, Vacuum 124 (2016) 85–88 [CrossRef] [Google Scholar]
  31. B.D. Beake, N. Li, Ch. Gey et al., Wear performance of different PVD coatings during hard wet end milling of H13 tool steel, Surf. Coat. Technol. 279 (2015) 118–125 [CrossRef] [Google Scholar]
  32. P.L. Ge, M.D. Bao, H.J. Zhang, K. You, X.P. Liu, Effect of plasma nitriding on adhesion strength of CrTiAlN coatings on H13 steels by closed field unbalanced magnetron sputter ion plating, Surf. Coat. Technol. 229 (2013) 146–150 [CrossRef] [Google Scholar]
  33. S. Yongyao, T. Liangliang, H. Rong, Effect of sputtering current on the comprehensive properties of (Ti,Al)N coating and high-speed steel substrate, J. Mater. Eng. Perform. 27 (2018) 2381–2387 [CrossRef] [Google Scholar]
  34. J.Y. Xu, Z.Q. Liu, G.Q. Guo, M. Chen, An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools, Int. J. Adv. Manuf. Technol. 67 (2013) 517–533 [CrossRef] [Google Scholar]
  35. S.N. Grigoriev, A.S. Metel, M.A. Volosova, Yu.A. Melnik, Deposition of wear-resistant coatings using a combined source of metal atoms and fast gas molecules, Mech. Ind. 16 (2015) 705 [CrossRef] [Google Scholar]
  36. S.N. Grigoriev, A.S. Metel, M.A. Volosova, Yu.A. Melnik, Surface hardening by means of plasma immersion ion implantation and nitriding in glow discharge with electrostatic confinement of electrons, Mech. Ind. 16 (2015) 711 [CrossRef] [EDP Sciences] [Google Scholar]
  37. A.A. Vereschaka, M.A. Volosova, A.D. Batako et al., Development of wear-resistant coatings compounds for high-speed steel tool using a combined cathodic vacuum arc deposition, Int. J. Adv. Manuf. Technol. 84 (2016) 1471–1482 [Google Scholar]
  38. M.M. Stebulyanin, A.A. Gurkina, A.A. Shein, N.Y. Cherkasova, Measuring adhesive bond strength and microhardness of multilayer composite wear-resistant coating, Mech. Ind. 17 (2016) 712 [CrossRef] [EDP Sciences] [Google Scholar]
  39. V.V. Kuzin, M.Y. Fedorov, P. Dašiæ, Stressed state of boundary between tic/tin-coating layers applied to nitride ceramic under action of a force load, Refract. Ind. Ceram. 58 (2018) 338–342 [CrossRef] [Google Scholar]
  40. C.-F. Wang, S.-f. Ou, S.-Y. Chiou, Microstructures of TiN, TiAlN and TiAlVN coatings on AISI M2 steel deposited by magnetron reactive sputtering, Trans. Nonferrous Met. Soc. China 24 (2014) 2559–2565 [CrossRef] [Google Scholar]
  41. K.T. Cho, Y.-K. Lee, W.B. Lee, Wear behavior of AISI D2 steel by enhanced ion nitriding with atomic attrition, Tribol. Int. 87 (2015) 82–90 [CrossRef] [Google Scholar]
  42. Y. Sato, H. Matsuoka, A. Kubo, et al., Influence of water-miscible cutting fluid on tool wear behavior of various coated high-speed steel tools in hobbing, AIP Conf. Proc. 1835 (2017) 020033 [Google Scholar]
  43. M. Bar-Hen, I. Etsion, Experimental study of the effect of coating thickness and substrate roughness on tool wear during turning. Tribol. Int. 110 (2017) 341–347 [CrossRef] [Google Scholar]
  44. G. Skordaris, K.D. Bouzakis, T. Kotsanis, P. Charalampous, E. Bouzakis, O. Lemmer, S. Bolz, Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools, Surf. Coat. Technol. 307 (2016) 452–460 [CrossRef] [Google Scholar]
  45. V. Braic, C.N. Zoita, M. Balaceanu et al., TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools, Surf. Coat. Technol. 204 (2010) 1925–1928 [CrossRef] [Google Scholar]
  46. A.S. Metel, S.N. Grigoriev, Yu.A. Melnik, V.P. Bolbukov, Broad beam sources of fast molecules with segmented cold cathodes and emissive grids, Instrum. Exp. Tech. 55 (2012) 122–130 [CrossRef] [Google Scholar]
  47. A.S. Metel, S.N. Grigoriev, Yu.A. Melnik, V.V. Prudnikov, Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons, Plasma Phys. Rep. 37 (2011) 628–637 [Google Scholar]
  48. M.A. Volosova, V.D. Gurin, Influence of vacuum-plasma nitride coatings on contact processes and a mechanism of wear of working surfaces of high-speed steel cutting tool at interrupted cutting, J. Frict. Wear 24 (2013) 183–189 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.