EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 20 / No 6 (2019) Mechanics & Industry, 20 6 (2019) 610 References
Open Access
Issue
Mechanics & Industry
Volume 20, Number 6, 2019
Article Number 610
Number of page(s) 10
DOI https://doi.org/10.1051/meca/2019043
Published online 27 September 2019
  1. E. Gustafsson, Investigation of friction between plastic parts, PhD thesis, Chalmers University of Technology, Göteborg, Sweden, 2013 [Google Scholar]
  2. P. Menezes, S. Ingole, M. Nosonovsky, S. Kailas, M. Lovell, Tribology for scientists and engineers, from basics to advanced concepts, Springer, Berlin (2013) pp. 43–44 [CrossRef] [Google Scholar]
  3. R.P. Nachane, G.F.S. Haussain, K.R. Krishana Iyer, Theory of the stick-slip effect in friction, Indian J. Fib. Textile Res. 23, 201–208 (1998) [Google Scholar]
  4. J. Takadoum, Materials and surface engineering in tribology, John Wiley & Sons, Hoboken, NJ, 2007, pp. 63–64., first published by Hermes Science/Lavoisier entitles: “Matériaux et surfaces en tribology'' [Google Scholar]
  5. N.A. Stoica, A. Tudor, Some aspects concerning the behaviour of friction materials at low and very low sliding speeds, Tribol. Ind. 37, 374–379 (2015) [Google Scholar]
  6. S.S. Antoniu, A. Cameron, The friction-speed relation for stick data, Wear 36, 235–254 (1976) [Google Scholar]
  7. E. Cazimitrovici, M.V. Suciu, Laminarea Materialelor Metalice Speciale, Editura BREN, Bucharest, Romania, 2000 [Google Scholar]
  8. Generic Material Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) http://www.dielectriccorp.com/downloads/thermoplastics/uhmw.pdf [Google Scholar]
  9. E. Pirva, Etudes mécaniques et multi-échelle du comportement isotrope et anisotrope 3D en grandes déformations plastiques. Application à la modélisation numérique de l'emboutissage profonde des tôles des alliages d'aluminium, Research Master's Thesis, Supervisor: Assoc. Prof. Adinel GAVRUS, INSA Rennes, France, 2014 [Google Scholar]
  10. W. Nasri, A. Gavrus, A. Kouadri-David, K. Sai, Applications of multi-scale models to numerical simulation and experimental analysis of anisotropic elastoplastic behavior of metallic sheets, Key Eng. Mater. 611–612, 536–544 (2014) [Google Scholar]
  11. W. Nasri, A. Gavrus, A. Kouadri-David, K. Sai, Experimental characterization and numerical modeling of three-dimensional anisotropic behavior of a thick sheet aluminum alloy AA2024-T351 using multi-scale approaches, WIT Trans. Built Environ. 166, 163–177 (2016) [CrossRef] [Google Scholar]
  12. Manual of UMT Multi-Specimen Test System Hardware Ind. & Applications Available at http://erc.ncat.edu/Facilities/Manuals/CETR_UMT2_Manual.pdf [Google Scholar]
  13. E. Pirva, A. Tudor, A. Gavrus, Fractal analysis of surface micro-topography for a rolled anisotropic thick sheet of aluminium alloy (AA2024-T351), IOP Conf. Ser. Mater. Sci. Eng. 147, 1 (2016) [Google Scholar]
  14. E. Pirva, A. Tudor, A. Gavrus, G. Chisiu, N. Stoica, A. Predescu, Micro-scratching tests of a rolled aluminium alloy AA2024-T351 thick plate using a diamond micro-blade, IOP Confer. Ser. Mater. Sci. Eng. 174, 1 (2016) [Google Scholar]
  15. P. Montmitonnet, F. Delamare, E. Felder, N. Marsault, Cours de Tribologie de la Mise en Forme, Master/DEA, Ed. Ecole Nationale des Mines de Paris, France 1992 [Google Scholar]
  16. H. Zahouani, R. Vargiolu, J.L. Loubet, Fractal Models of Surface Topography and Contact Mechanics, Math. Comp. Model. 28, 517–534 (1998) [CrossRef] [Google Scholar]
  17. B. Bhushan, Contact mechanics of rough surfaces in tribology: single asperity contact, Appl. Mech. Rev. 49, 275–297 (1996) [Google Scholar]
  18. Y. Morag, I. Etsion, Resolving the contradiction of asperities plastic to elastic mode transition in current contact models of fractal rough surfaces, Wear 262, 624–629 (2007) [Google Scholar]
  19. B.B. Mandelbrot, The fractal geometry of nature, Phys. Scr. 32, 257–260 (1982) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.