Mechanics & Industry

Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication 601

Fethi Aloui, Lamia Gaied, Wafik Abassi, Marc Lippert and Maxence Bigerelle

Published online: 09 August 2019

DOI: https://doi.org/10.1051/meca/2019035

Design and shape optimization of MR brakes using Nelder–Mead optimization algorithm 602

Yousef Bazargan-Lari

Published online: 13 August 2019

DOI: https://doi.org/10.1051/meca/2019017

Numerical identification of the thermal conductivity tensor and the heat capacity per unit volume of an anisotropic material 603

Kossi Atchonouglo, Jean-Christophe Dupré, Arnaud Germaneau and Claude Vallée

Published online: 22 August 2019

DOI: https://doi.org/10.1051/meca/2019026

Optimization of turbojet engine cycle with dual-purpose PSO algorithm 604

M.R. Ahadi Nasab and M.A. Ehyaei

Published online: 20 August 2019

DOI: https://doi.org/10.1051/meca/2019029

Open Access

Modelling and characterisation of geometric errors on 5-axis machine-tool 605

Fabien Viprey, Hichem Nouira, Sylvain Lavernhe and Christophe Tournier

Published online: 05 September 2019

DOI: https://doi.org/10.1051/meca/2019034

Open Access

Cyclic virtual test on wood furniture by Monte Carlo simulation: from compression behavior to connection modeling 606

L. Chevalier, F. Pled, F. Zambou and E. Launay

Published online: 04 September 2019

DOI: https://doi.org/10.1051/meca/2019039

Stress analysis of a second stage gas turbine blade under asymmetric thermal gradient 607

Javad Rahimi, Esmaeil Poursaeidi and Ehsan Khavasi

Published online: 17 September 2019

DOI: https://doi.org/10.1051/meca/2019041

A design methodology for additive manufacturing applied to fused deposition modeling process 608

Boyard Nicolas, Christmann Olivier, Rivette Mickael and Richir Simon

Published online: 20 September 2019

DOI: https://doi.org/10.1051/meca/2019040

Microtension control for a yarn winding system with an IMC PID controller 609

Qing Wang, Anqing Li, Yuanyuan Li, Jixin Liu, Hui Shen and Guoyong Li

Published online: 25 September 2019

DOI: https://doi.org/10.1051/meca/2019042

Some aspects regarding the influence of the anisotropy of an AA2021-T351 rolled thick plate on its tribological behaviour 610

Elisabeta Pirva, Andrei Tudor, Adinel Gavrus, Nicolae Stoica and Sorin Cananau

Published online: 27 September 2019

DOI: https://doi.org/10.1051/meca/2019043

Research on the relationship between transmission efficiency and input torque of manual transmission 611

Shu Yan, Geng Li, Shaopeng Tian and Qingxing Zheng

Published online: 26 November 2019

DOI: https://doi.org/10.1051/meca/2019046

A calculation method of thermal deformation for double helical gear 612

Cheng Wang

Published online: 26 November 2019

DOI: https://doi.org/10.1051/meca/2019045

Study on the influence of ship collision upon propulsion shafting 613

Liang-Xiong Dong, Yu-Sheng Niu and Xiao-Fei Wen

Published online: 26 November 2019

DOI: https://doi.org/10.1051/meca/2019050

Experimental study on transmission performance of harmonic drive under multifactor interaction 614

Guangwu Zhou, Zhenhua Zhang and Hua Zhang

Published online: 26 November 2019

DOI: https://doi.org/10.1051/meca/2019051

Investigation on the skidding dynamic response of rolling bearing with local defect under elastohydrodynamic lubrication 615

Jianxiong Kang, Yanjun Lu, Yongfang Zhang, Cheng Liu, Sha Li and Norbert Müller

Published online: 26 November 2019

DOI: https://doi.org/10.1051/meca/2019054

Increasing bending angle in thick-walled pipes with wide heating 616

Seyed Ehsan Chavoshi and Seyed Ebrahim Moussavi Torshizi

Published online: 05 December 2019

DOI: https://doi.org/10.1051/meca/2019053

A 2.5D numerical study on open water hydrodynamic performance of a Voith-Schneider propeller 617

Mohammad Bakhtiari and Hassan Ghassemi

Published online: 29 November 2019

DOI: https://doi.org/10.1051/meca/2019049

Experimental study on bending behaviour of aluminium-copper clad sheets in V-bending process 618

R. Srinivasan and G. Karthik Raja

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019059

Open Access

PWR effect on crack initiation under equi-biaxial loading development of the experiment 619

Cédric Gourdin, Gregory Perez, Hager Dhahri, Stéphan Courtin, Jean Christophe Le Roux and Habibou Maitournam

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019060

Hole quality assessment in drilling process of basalt/epoxy composite laminate subjected to the magnetic field 620

Farhad Najarian, Roozbeh Alipour, Abbas Razavykia and Ali Farokhi Nejad

Published online: 05 December 2019

DOI: https://doi.org/10.1051/meca/2019063

Determining optimal suspension system parameters for spring fatigue life using design of experiment 621

Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm and Salvinder Singh Karam Singh

Published online: 29 November 2019

DOI: https://doi.org/10.1051/meca/2019062

Investigation into the dynamic characteristics of downhole perforation tools with multiple shock absorbers 622

Xiaoqiang Guo, Jun Liu, Guorong Wang, Qingyou Liu and Xianming Song

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019055

Influence of the axial position of the external load on the mechanical behavior of the bolted lap joint with different materials 623

Peng He, Zhiqiang Fan, Xiangyu Yu and Zhansheng Liu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019066

Open Access

Effect of minimum quantity lubrication strategies on tribological study of simulated machining operation 624

Sana Werda, Arnaud Duchosal, Guénhaël Le Quilliec, Antoine Morandeau and René Leroy

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019057

Open Access

Enhanced formulae for determining the axial behavior of cylindrical extension springs 625

Manuel Paredes, Thomas Stephan and Hervé Orcière

Published online: 29 November 2019

DOI: https://doi.org/10.1051/meca/2019067

Open Access

From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue 626

Guillaume Vouaillat, Jean-Philippe Noyel, Fabrice Ville, Xavier Kleber and Sylvain Rathery

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019064

1D gas dynamic code for performance prediction of one turbocharger radial turbine with different finite difference schemes 627

Ahmed Ketata, Zied Driss and Mohamed Salah Abid

Published online: 29 November 2019

DOI: https://doi.org/10.1051/meca/2019073

Preliminary design of centrifugal compressor using multidisciplinary optimization method 628

Sun Shouyi, Yue Zhufeng, Li Lei, Zhang Mengchuang and Yang Weizhu

Published online: 29 November 2019

DOI: https://doi.org/10.1051/meca/2019071

Analytical approach and numerical simulation to investigate the stress field and the dynamic stress intensity factors of a cracked tooth subjected to a periodic loading 629

Mohamed Boughazala, Khemais Hamrouni, Abdessattar Aloui and Mohamed Haddar

Published online: 02 December 2019

DOI: https://doi.org/10.1051/meca/2019065

A systematic review of voxelization method in additive manufacturing 630

Antonio Bacciaglia, Alessandro Ceruti and Alfredo Liverani

Published online: 05 December 2019

DOI: https://doi.org/10.1051/meca/2019058

Mechanics & Industry

Volume 20 / No 6 (2019)

Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication 601

Design and shape optimization of MR brakes using Nelder–Mead optimization algorithm 602

Numerical identification of the thermal conductivity tensor and the heat capacity per unit volume of an anisotropic material 603

Optimization of turbojet engine cycle with dual-purpose PSO algorithm 604

Modelling and characterisation of geometric errors on 5-axis machine-tool 605

Cyclic virtual test on wood furniture by Monte Carlo simulation: from compression behavior to connection modeling 606

Stress analysis of a second stage gas turbine blade under asymmetric thermal gradient 607

A design methodology for additive manufacturing applied to fused deposition modeling process 608

Microtension control for a yarn winding system with an IMC PID controller 609

Some aspects regarding the influence of the anisotropy of an AA2021-T351 rolled thick plate on its tribological behaviour 610

Research on the relationship between transmission efficiency and input torque of manual transmission 611

A calculation method of thermal deformation for double helical gear 612

Study on the influence of ship collision upon propulsion shafting 613

Experimental study on transmission performance of harmonic drive under multifactor interaction 614

Investigation on the skidding dynamic response of rolling bearing with local defect under elastohydrodynamic lubrication 615

Increasing bending angle in thick-walled pipes with wide heating 616

A 2.5D numerical study on open water hydrodynamic performance of a Voith-Schneider propeller 617

Experimental study on bending behaviour of aluminium-copper clad sheets in V-bending process 618

PWR effect on crack initiation under equi-biaxial loading development of the experiment 619

Hole quality assessment in drilling process of basalt/epoxy composite laminate subjected to the magnetic field 620

Determining optimal suspension system parameters for spring fatigue life using design of experiment 621

Investigation into the dynamic characteristics of downhole perforation tools with multiple shock absorbers 622

Influence of the axial position of the external load on the mechanical behavior of the bolted lap joint with different materials 623

Effect of minimum quantity lubrication strategies on tribological study of simulated machining operation 624

Enhanced formulae for determining the axial behavior of cylindrical extension springs 625

From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue 626

1D gas dynamic code for performance prediction of one turbocharger radial turbine with different finite difference schemes 627

Preliminary design of centrifugal compressor using multidisciplinary optimization method 628

Analytical approach and numerical simulation to investigate the stress field and the dynamic stress intensity factors of a cracked tooth subjected to a periodic loading 629

A systematic review of voxelization method in additive manufacturing 630