Free Access
Issue
Mechanics & Industry
Volume 21, Number 3, 2020
Article Number 305
Number of page(s) 16
DOI https://doi.org/10.1051/meca/2020017
Published online 03 April 2020
  1. C. Liu, B. Zhao, W. Li, X. Lu, Effects of bushing profiles on the elastohydrodynamic lubrication performance of the journal bearing under steady operating conditions, Mech. Ind. 20, 207 (2019) [CrossRef] [Google Scholar]
  2. H. Zhang, M. Hua, G. Dong, D. Zhang, K. Chin, A mixed lubrication model for studying tribological behaviors of surface texturing, Tribol. Int. 93, 583–592 (2016) [Google Scholar]
  3. J. Ji, C. Guan, Y. Fu, Effect of micro-dimples on hydrodynamic lubrication of textured sinusoidal roughness surfaces, Chin. J. Mech. Eng. 31 (2018) [Google Scholar]
  4. C. Gu, X. Meng, D. Zhang, Y. Xie, Transient analysis of the textured journal bearing operating with the piezoviscous and shear-thinning fluids, J. Tribol. 139, 051708 (2017) [Google Scholar]
  5. B. Manser, I. Belaidi, A. Hamrani, S. Khelladi, F. Bakir, Performance of hydrodynamic journal bearing under the combined influence of textured surface and journal misalignment: a numerical survey, Comp. Rend. Mécan. 347, 141–165 (2019) [Google Scholar]
  6. R. Yu, W. Chen, P. Li, The analysis of elastohydrodynamic lubrication in the textured journal bearing, Proc. Inst. Mech. Eng. J 230, 1197–208 (2016) [CrossRef] [Google Scholar]
  7. Q. Lin, Q. Bao, K. Li, M.M. Khonsari, H. Zhao, An investigation into the transient behavior of journal bearing with surface texture based on fluid-structure interaction approach, Tribol. Int. 118, 246–255 (2018) [Google Scholar]
  8. N. Tala-Ighil, M. Fillon, P. Maspeyrot, Effect of textured area on the performances of a hydrodynamic journal bearing, Tribol. Int. 44, 211–219 (2011) [Google Scholar]
  9. N. Tala-Ighil, M. Fillon, A numerical investigation of both thermal and texturing surface effects on the journal bearings static characteristics, Tribol. Int. 90, 228–239 (2015) [Google Scholar]
  10. A.B. Shinde, P.M. Pawar, Effect of partial grooving on the performance of hydrodynamic journal bearing, Ind. Lubric. Tribol. 69, 574–584 (2017) [CrossRef] [Google Scholar]
  11. X. Pang, J. Chen, S.H. Hussain, Numeric and experimental study of generalized geometrical design of a hydrodynamic journal bearing based on the general film thickness equation, J. Mech. Sci. Technol. 26, 3149–3158 (2012) [CrossRef] [Google Scholar]
  12. H. Zhang, M. Hafezi, G. Dong, Y. Liu, A design of coverage area for textured surface of sliding journal bearing based on genetic algorithm, J. Tribol. 140, 061702 (2018) [Google Scholar]
  13. H. Zhang, Y. Liu, M. Hua, D. Zhang, L. Qin, G. Dong, An optimization research on the coverage of micro-textures arranged on bearing sliders, Tribol. Int. 128, 231–239 (2018) [Google Scholar]
  14. C. Sinanoğlu, F. Nair, M.B. Karamış, Effects of shaft surface texture on journal bearing pressure distribution, J. Mater. Process. Technol. 168, 344–353 (2005) [CrossRef] [Google Scholar]
  15. C. Shen, M.M. Khonsari, Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding, Tribol. Int. 82, 1–11 (2015) [Google Scholar]
  16. C. Gologlu, N. Sakarya, The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method, J. Mater. Process. Technol. 206, 7–15 (2008) [CrossRef] [Google Scholar]
  17. C.Y. Chen, C.S. Liu, Y.C. Li, S. Mou, Geometry optimization for asymmetrical herringbone grooves of miniature hydrodynamic journal bearings by using Taguchi technique, Proc. Inst. Mech. Eng. J. Eng. Tribol. 229, 196 (2014) [CrossRef] [Google Scholar]
  18. Z.P. He, W.Q. Gong, Factors influence the lubrication characteristics investigation and optimization of bearing based on neural network, Ind. Lubric. Tribol. 68, 369–385 (2016) [CrossRef] [Google Scholar]
  19. A.B. Shinde, P.M. Pawar, Multi-objective optimization of surface textured journal bearing by Taguchi based Grey relational analysis, Tribol. Int. 114, 349–357 (2017) [Google Scholar]
  20. M. Rades, Dynamic analysis of an inertial foundation model, Int. J. Solids Struct. 8, 1353–1372 (1972) [Google Scholar]
  21. J. Sun, C.L. Gui, Z.H. Wang, Research on elastohydrodynamic lubrication of a crankshaft bearing with a rough surface considering crankshaft deformation, Proc. Inst. Mech. Eng. D 222, 2403–2414 (2008) [CrossRef] [Google Scholar]
  22. C.R. Lin, H.G.J. Rylander, Performance characteristics of compliant journal bearings, J. Tribol. 113, 639–644 (1991) [Google Scholar]
  23. S.B. Glavatskih, M. Fillon, TEHD analysis of thrust bearings with PTFE-faced pads, in Proceedings of2004 ASME/STLE International Joint Tribology Conference , 2004 [Google Scholar]
  24. K. Thomsen, P. Klit, A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing, Tribol. Int. 44, 1872–1877 (2011) [Google Scholar]
  25. N. Patir, H.S. Cheng, An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication, J. Lubric. Technol. 100, 12–17 (1978) [CrossRef] [Google Scholar]
  26. N. Patir, M.S. Cheng, Application of average flow model to lubrication between rough sliding surfaces, J. Lubric. Technol. 101, 220–229 (1979) [CrossRef] [Google Scholar]
  27. J.A. Greenwood, J.H. Tripp, The contact of two nominally flat rough surfaces, Proc. Inst. Mech. Eng. 185, 625–633 (1970) [CrossRef] [Google Scholar]
  28. F. Lv, Z. Rao, N. Ta, C. Jiao, Mixed-lubrication analysis of thin polymer film overplayed metallic marine stern bearing considering wall slip and journal misalignment, Tribol. Int. 109, 390–397 (2017) [Google Scholar]
  29. S. Wen, P. Huang, Principles of Tribology, Fourth Edition, Tsinghua University Press, Beijing (2012) [Google Scholar]
  30. J. Ferron, J. Frene, R. Boncompain, A study of the thermohydrodynamic performance of a plain journal bearing comparison between theory and experiments, J. Lubric. Technol. 105, 422–428 (1983) [CrossRef] [Google Scholar]
  31. D.C. Montgomery, Design and Analysis of Experiment, Sixth Edition, John Wiley & Sons, Inc., Singapore (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.