Mechanics & Industry

Open Access

Effects of double parabolic profiles with groove textures on the hydrodynamic lubrication performance of journal bearing under steady operating conditions 301

Chongpei Liu, Wanyou Li, Xiqun Lu and Bin Zhao

Published online: 03 April 2020

DOI: https://doi.org/10.1051/meca/2020018

• Full HTML
• PDF (2.145 MB)
• References

Open Access

Effect of hardening law and process parameters on finite element simulation of single point incremental forming (SPIF) of 7075 aluminum alloy sheet 302

Rasoul Esmaeilpour, Hyunki Kim, Taejoon Park, Farhang Pourboghrat, Akshat Agha and Fadi Abu-Farha

Published online: 03 April 2020

DOI: https://doi.org/10.1051/meca/2020019

• Full HTML
• PDF (6.060 MB)
• References

Open Access

Parallel Thomas approach development for solving tridiagonal systems in GPU programming − steady and unsteady flow simulation 303

Milad Souri, Pooria Akbarzadeh and Hossein Mahmoodi Darian

Published online: 06 April 2020

DOI: https://doi.org/10.1051/meca/2020013

• Full HTML
• PDF (6.602 MB)
• References

Open Access

Stress-based topology optimization of compliant mechanisms using nonlinear mechanics 304

Gabriele Capasso, Joseph Morlier, Miguel Charlotte and Simone Coniglio

Published online: 07 April 2020

DOI: https://doi.org/10.1051/meca/2020011

• Full HTML
• PDF (5.529 MB)
• References

Open Access

A multiobjective optimization of journal bearing with double parabolic profiles and groove textures under steady operating conditions 305

Chongpei Liu, Ning Zhong, Xiqun Lu and Bin Zhao

Published online: 03 April 2020

DOI: https://doi.org/10.1051/meca/2020017

• Full HTML
• PDF (3.024 MB)
• References

Open Access

SOFC modelling considering radiation heat transfer 306

Wael Alimi, Ridha Chouikh and Amen Allah Guizani

Published online: 03 April 2020

DOI: https://doi.org/10.1051/meca/2020014

• Full HTML
• PDF (1.355 MB)
• References

Open Access

Experimental investigation into characterization and machining of Al + SiCp nano-composites using coated carbide tool 307

Pradyut Kumar Swain, Kasinath Das Mohapatra, Ratnakar Das, Ashok Kumar Sahoo and Amlana Panda

Published online: 03 April 2020

DOI: https://doi.org/10.1051/meca/2020015

• Full HTML
• PDF (1.496 MB)
• References

Open Access

Thermal potential of a geothermal earth-to-air heat exchanger in six climatic conditions of México 308

M. Rodríguez-Vázquez, J. Xamán, Y. Chávez, I. Hernández-Pérez and E. Simá

Published online: 10 April 2020

DOI: https://doi.org/10.1051/meca/2020016

• Full HTML
• PDF (1.881 MB)
• References

Open Access

An investigation on effect of EDL on heat transfer of micro heat pipe with square and triangular cross section 309

Maryam Fallah Abbasi, Hossein Shokouhmand and Morteza Khayat

Published online: 27 April 2020

DOI: https://doi.org/10.1051/meca/2020021

• Full HTML
• PDF (2.210 MB)
• References

Open Access

Effects of pre-corrosion, water and detergent contamination on rolling contact fatigue 310

Wen Wang, Xiaopeng Hao, Xiaomeng Chen, Bo Han and Xiaobo Zhou

Published online: 27 April 2020

DOI: https://doi.org/10.1051/meca/2020023

• Full HTML
• PDF (2.058 MB)
• References

Open Access

Non-Newtonian couple-stress squeeze film behaviour between oscillating anisotropic porous circular discs with sealed boundary 311

Bilal Boussaha, Mustapha Lahmar, Benyebka Bou-Said and Hamid Boucherit

Published online: 30 April 2020

DOI: https://doi.org/10.1051/meca/2020004

• Full HTML
• PDF (3.407 MB)
• References