EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 21 / No 5 (2020) Mechanics & Industry, 21 5 (2020) 523 References
Open Access
Issue
Mechanics & Industry
Volume 21, Number 5, 2020
Article Number 523
Number of page(s) 12
DOI https://doi.org/10.1051/meca/2020068
Published online 20 August 2020
  1. A. Salimi Asl, A. Erdem, M. Rafighi, Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks, Scientia Iranica. 24, 2864–2874 (2017) [Google Scholar]
  2. I. Ciftci, Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools, Tribol. Int. 39, 565–569 (2006) [Google Scholar]
  3. S. Karabulut, A. Sahinoglu, Effect of the cutting parameters on surface roughness, power consumption and machine noise in machining of R260 steel, J. Polytech. Politek. 21, 237–244 (2018) [Google Scholar]
  4. M. Özdemir, M.T. Kaya, H.K. Akyildiz, Analysis of surface roughness and cutting forces in hard turning of 42CrMo4 steel using Taguchi and RSM method, Mechanics 26, 231–241 (2020) [CrossRef] [Google Scholar]
  5. A. Şahinoğlu, M. Rafighi, Optimization of cutting parameters with respect to roughness for machining of hardened AISI 1040 steel, Mater. Test. 62, 85–95 (2020) [CrossRef] [Google Scholar]
  6. A. Şahinoğlu, Ş. Karabulut, A. Güllü, Study on spindle vibration and surface finish in turning of Al 7075, Solid State Phenom. 261, 321–327 (2017) [CrossRef] [Google Scholar]
  7. S.A. Bagaber, A.R. Yusoff, Multi-objective optimization of cutting parameters to minimize power consumption in dry turning of stainless steel 316, J. Clean. Prod. 157, 30–46 (2017) [Google Scholar]
  8. R.K. Bhushan, Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites, J. Clean. Prod. 39, 242–254 (2013) [Google Scholar]
  9. S.K. Nayak, J.K. Patro, S. Dewangan, S. Gangopadhyay, Multi-objective optimization of machining parameters during dry turning of AISI 304 austenitic stainless steel using grey relational analysis, Proc. Mater. Sci. 6, 701–708 (2014) [CrossRef] [Google Scholar]
  10. A. Şahinoğlu, M. Rafighi, Investigation of vibration, sound intensity, machine current and surface roughness values of AISI 4140 during machining on the Lathe, Arab. J. Sci. Eng. 45, 765–778 (2020) [Google Scholar]
  11. L. Zhou, J. Li, F. Li, Q. Meng, J. Li, X. Xu, Energy consumption model and energy efficiency of machine tools: a comprehensive literature review, J. Clean. Prod. 112, 3721–3734 (2016) [Google Scholar]
  12. A. Junaidh, G. Yuvaraj, J. Peter, V. Bhuvaneshwari, K. Karthik, Influence of process parameters on the machining characteristics of austensite stainless steel (AISI 304), Mater. Today 5, 13321–13333 (2018) [Google Scholar]
  13. A. Kulkarni, V. Sargade, C. More, Machinability investigation of AISI 304 austenitic stainless steels using multilayer AlTiN/TiAlN coated carbide inserts, Proc. Manuf. 20, 548–553 (2018) [Google Scholar]
  14. P.S. Bilga, S. Singh, R. Kumar, Optimization of energy consumption response parameters for turning operation using Taguchi method, J. Clean. Prod. 137, 1406–1417 (2016) [Google Scholar]
  15. A. Şahinoğlu, A. Güllü, M.A. Dönertaş, GGG50 Malzemenin Torna Tezgâhında Farklı Kesme Parametrelerinde İşlenmesinde Titreşim, Ses Şiddetinin ve Yüzey Pürüzlülüğünün İncelenmesi, Sinop Üniv. Fen Bilim. Derg. 2, 67–79 (2017) [Google Scholar]
  16. W. Grzesik, B. Denkena, K. Żak, T. Grove, B. Bergmann, Energy consumption characterization in precision hard machining using CBN cutting tools, Int. J. Adv. Manuf. Technol. 85, 2839–2845 (2016) [Google Scholar]
  17. G. Kant, K.S. Sangwan, Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining, J. Clean. Prod. 83, 151–164 (2014) [Google Scholar]
  18. P. Patole, V. Kulkarni, Optimization of process parameters based on surface roughness and cutting force in MQL turning of AISI 4340 using nano fluid, Mater. Today 5, 104–112 (2018) [Google Scholar]
  19. A. Ghani, I. Choudhury, Study of tool life, surface roughness and vibration in machining nodular cast iron with ceramic tool, J. Mater. Process. Technol. 127, 17–22 (2002) [CrossRef] [Google Scholar]
  20. S.R. Das, D. Dhupal, A. Kumar, Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool, Measurement 62, 108–126 (2015) [CrossRef] [Google Scholar]
  21. A. Salımıasl, M. Rafıghı, Titreşim ve Kesme Kuvveti Esaslı Takım Aşınmasının Bulanık Mantıkla İzlenmesi ve Tahmini, Politek. Derg. 20, 111–120 (2017) [Google Scholar]
  22. A. Salimiasl, M. Rafighi, Talaş Kaldırma İşlemlerinde Takım Durumunun İzlemesi İçin Son Gelişmelerin İncelenmesi, Düzce Üniv. Bilim Teknol. Derg. 5, 314–337 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.